| |
|
|
| |
Poglavlja u knjizi
|
| |
|
|
| |
Izvorni znanstveni i pregledni radovi u CC časopisima
|
| |
|
|
| |
Znanstveni radovi u drugim časopisima
|
| |
1. Kozak, Dražan; Vojvodič-Tuma, Jelena; Gubeljak, Nenad; Semenski, Damir.
Factors influencing the yielding constraint for cracked welded components. // Materiali in tehnologije. 39 (2005) , 1/2; 29-36 (članak, znanstveni).  
|
2. Čanađija, Marko; Kozak, Dražan; Tonković, Zdenko; Tóth, László; Lenkey B. Gyöngyvér.
Spregnuta termomehanika: oblici sprege i numerički aspekti. // Engineering review. 24 (2004) ; 1-10 (pregledni rad, znanstveni).
|
3. Raos, Pero; Lucić, Mirjana; Matejiček, Franjo.
Optimization of Adhesive Bonding Process of Single-lap joints. // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku. 11 (2004) , 1-2; 11-16 (prethodno priopćenje, znanstveni).
|
|
|
|
|
| |
Ostali radovi u drugim časopisima
|
| |
1. Derado, Ivo; Kozak, Dražan.
Albert Einstein - prigodom Svjetske godine fizike 2005.. // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku. 12 (2005) , 1-2; 3-8 (osvrt, ostalo).
|
2. Vojvodič Tuma, Jelena; Tuma, Matija; Gubeljak, Nenad; Kozak, Dražan; Kosec, Gorazd.
Energija prihodnosti - Jedrska fuzija. // Materials and Technology. 39 (2005) , 6; 229-233 (članak, stručni).
|
|
|
|
|
|
|
| |
Plenarna izlaganja
|
| |
1. Kozak, Dražan.
Engineering data collection and exchange: The state in Croatia // .
(plenarno predavanje,ppt prezentacija,znanstveni).
|
2. Kozak, Dražan; Gubeljak, Nenad; Matejiček, Franjo; Oblak, Maks.
Distribution of Stresses in the Vicinity of Straight Crack Front with Present Materials Dissimilarity // Proceedings of the 2003 International Conference on Computational & Experimental Engineering & Sciences / C.A. Herrera (ur.).
Encino (CA) : Tech Science Press, 2003. (plenarno predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
|
|
|
|
|
|
| |
Objavljena pozvana predavanja na skupovima
|
| |
|
|
| |
Znanstveni radovi u zbornicima skupova s međunar.rec.
|
| |
1. Sertić, Josip; Kozak, Dražan.
Stress and Strain Analysis of the Spherical Pressure Vessel: Analytical and Numerical Approach // Proceedings of the 5th DAAAM International Conference on Advanced Technologies for Developing Countries / Mikac, Tonči & Katalinić, Branko (ur.).
Rijeka : Tehnički fakultet Sveučilišta u Rijeci ; DAAAM International Vienna, 2006. 31-36 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
2. Gubeljak, Nenad; Predan, Jožef; Kozak, Dražan and Vojvodič Tuma, Jelena.
The estimation of optimal impact toughness for the material of turbine shaft // Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries / Kljajin, Milan ; Katalinic, Branko ; Budic, Ivan (ur.).
Slavonski Brod : Josip Juraj Strossmayer University of Osijek ; Mechanical Engineering Faculty in Slavonski Brod ; DAAAM International Vienna, 2005. 61-69 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
3. Kozak, Dražan; Tóth, László; Tonković, Zdenko; Lenkey, Gyöngyvér; Čanađija, Marko; Szabolcs, Szávai.
New design of repair welded joints based on materials heterogeneity // Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries / Kljajin, Milan ; Katalinic, Branko ; Budic, Ivan (ur.).
Slavonski Brod : Josip Juraj Strossmayer University of Osijek ; Mechanical Engineering Faculty in Slavonski Brod ; DAAAM International Vienna, 2005. 123-128 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
4. Raos, Pero; Lucić, Mirjana; Matejiček, Franjo.
Experimental Investigation of Adhesive Layer Properties // Proceedings of the 21st Annual Meeting of the Polymer Processing Society / Radusch, Hans-Joachim (ur.).
Leipzig : The Polymer Processing Society, 2005. 114-114 (poster,međunarodna recenzija,objavljeni rad,znanstveni).
|
5. Semenski, Damir; Gubeljak, Nenad; Kozak, Dražan; Ćurković, Petar.
Full field deformation analysis applied to improved CTOD concept // Proceedings of 10th IMEKO TC10 International Conference on Technical Diagnostics / Monostori, Laszlo (ur.).
Budimpešta : Hungarian Academy of Sciences (MTA), 2005. 139-144 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
6. Gubeljak, Nenad; Semenski, Damir; Drvar, Nenad; Predan, Jožef; Kozak, Dražan; Oblak, Maks.
Object grating method application in strain determination on CTOD tests // Extended abstracts of 21st Danubia-Adria Symposium on Experimental Methods in Solid Mechanics / Jecić, Stjepan ; Semenski, Damir (ur.).
Zagreb : Hrvatsko društvo za mehaniku (HDM), 2004. 222-223 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
7. Kozak, Dražan; Gubeljak, Nenad; Predan Jožef; Matejiček, Franjo.
Strength mismatch effect on yield load in X-shaped weldment with centre crack // Book af abstracts of the First International Conference on Computational Mechanics / Mijuca, Dubravka ; Maksimovic, Steven (ur.).
Beograd : Faculty of Mathematics, University of Belgrade, 2004. 27 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
8. Kozak, Dražan; Kljajin, Milan; Ivandić, Željko.
Yield load solutions for X-shaped weldment with present mechanical heterogeneity // Annals of DAAAM for 2004 & Proceedings of the 15th International DAAAM Symposium / Katalinić, Branko (ur.).
Beč : DAAAM International Vienna, 2004. 233-234 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
9. Matejiček, Franjo; Kozak, Dražan; Konjatić, Pejo.
Validity of J-R resistance curve in the case of ductile crack growth // Extended abstracts of 21st Danubia-Adria Symposium on Experimental Methods in Solid Mechanics / Jecić, Stjepan ; Semenski, Damir (ur.).
Zagreb : Hrvatsko društvo za mehaniku (HDM), 2004. 216-217 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
10. Matejiček, Franjo; Lucić, Mirjana.
One Approach to the Specification of Adhesive Properties of Adhesive Joints // Proceedings of 21st Danubia-Adria Symposium on Experimental Methods in Solid Mechanics / Jecić, Stjepan ; Semenski, Damir (ur.).
Zagreb : Hrvatsko društvo za mehaniku (HDM), 2004. 168-169 (poster,međunarodna recenzija,objavljeni rad,znanstveni).
|
11. Gubeljak, Nenad; Kozak, Dražan; Matejiček, Franjo; Oblak, Maks.
Experimental and Numerical Analysis of Strength Overmatched Weld Root Passes on the Heat Affected Zone Fracture Behaviour // Extended Abstracts and Proceedings (CD-ROM Edition) of the 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (ur.).
Zagreb : Hrvatsko društvo za mehaniku (HDM), 2003. 183-190 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
12. Ivandić, Željko; Kozak, Dražan; Kljajin, Milan.
The Evaluation Procedure of Butt Weld Cruciform Detail // Proceedings of the 7th International Research/Expert Conference 'Trends in the Development of Machinery and Associated Technology' (TMT 2003) / Vivancos Calvet, Joan ; Puerta Sales, Ferran ; Ekinović, Sabahudin ; Brdarević, Safet (ur.).
Zenica : Barcelona : Faculty of Mechanical Engineering ; Escola Tecnica Superiora D'Enginyeria Industrial, 2003. 645-648 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
13. Kozak, Dražan; Blaj, Liliana; Matejiček, Franjo.
State of Stress Modelling by 2-D Finite Element Analysis of Fracture Toughness Specimens // Proceedings of the 6th International Conference on Boundary and Finite Element / Dobre, Ionel ; Faur, Nicolae (ur.).
Temišvar : Editura Politehnica, 2003. 303-312 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
14. Kozak, Dražan; Kljajin, Milan; Ivandić, Željko.
New engineering concepts of structural integrity // Proceedings of the 2nd DAAAM International Conference on Advanced Technologies for Developing Countries (ATDC'03) / Katalinić, Branko ; Tufekčić, Džemo and Šelo, Ramiz (ur.).
Beč : Tuzla : DAAAM International Vienna, 2003. 31-36 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
15. Matejiček, Franjo; Kozak, Dražan; Konjatić, Pejo.
Fracture Behaviour of High-Ductile CCT Specimen Under Elastic-Plastic Conditions // Extended Abstracts and Proceedings (CD-ROM Edition)of the 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (ur.).
Zagreb : Hrvatsko društvo za mehaniku (HDM), 2003. 601-608 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
16. Matejiček, Franjo; Raos, Pero; Lucić, Mirjana.
Numerical Analysis of Single-Lap Adhesive Joint // Extended abstracts of 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (ur.).
Zagreb : Hrvatsko društvo za mehaniku (HDM), 2003. 323-330 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
17. Raos, Pero; Matejiček, Franjo; Lucić, Mirjana.
Numerical Analysis of Adhesively Bonded Single-Lap Joint // Proceedings of Europe/Africa Regional Meeting PPS-2003 / Mitsoulis, Evan (ur.).
Atena : The Polymer Processing Society, 2003. P 004/1-P 004/2 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
18. Sedmak, Aleksandar; Kozak, Dražan; Adžiev, Gorgi; Matejiček, Franjo; Gubeljak, Nenad.
Conservation Law of J Integral Type for Multi-Material Body // Extended Abstracts and Proceedings (CD-ROM Edition)of the 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (ur.).
Zagreb : Hrvatsko društvo za mehaniku (HDM), 2003. 645-650 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
19. Kozak, Dražan; Gubeljak, Nenad; Matejiček, Franjo; Oblak, Maks.
Spreading of Plastic Zones by Heterogeneous Fracture Toughness Specimens Cracked in the HAZ // Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić, Branko ; Kljajin, Milan (ur.).
Osijek : Grafika Osijek, 2002. 35-40 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
20. Kozak, Dražan; Kljajin, Milan; Semenski, Damir.
Influence of the stress state on the J-integral value by fracture toughness specimens with medium thickness // Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Learning from Nature' / Katalinić, Branko (ur.).
Beč : DAAAM International Vienna, 2002. 287-288 (poster,međunarodna recenzija,objavljeni rad,znanstveni).
|
21. Kozak, Dražan; Sedmak, Aleksandar; Adžiev Gjorgji; Gubeljak, Nenad.
Application of J-integral to strength mismatch welded structures // Proceedings of the 6th International Research/Expert Conference 'Trends in the development of machinery and associated technology' / Brdarević, Safet ; Ekinović, Sabahudin ; Compamys, Pascual Ramon (ur.).
Zenica : Mašinski fakultet Univerziteta u Zenici, 2002. 353-356 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
22. Raos, Pero; Lucić, Mirjana; Matejiček, Franjo.
Experimental and Numerical Analysis of Lap Length Influence on Strength of Adhesively Bonded Joint // Proceedings of the 18^th Annual Meeting PPS-18 / Gaspar-Cunha, Antonio ; Nobrega, Joao Miguel (ur.).
Guimaraes : The Polymer Processing Society, 2002. P 017/1-P 017/6 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
|
|
|
|
|
|
|
| |
Drugi radovi u zbornicima skupova s recenzijom
|
| |
1. Samardžić, Ivan; Dunđer, Marko; Konjatić, Pejo.
Cost effective design in welded constructions production // 9th International Scientific Conference on Production Engineering "Computer Integrated Manufacturing and High Speed Machining" (CIM 2003) : proceedings / Cebalo, Roko ; Shulz Herbert (ur.).
Zagreb : Hrvatska udruga proizvodnog strojarstva (HUPS), 2003. V-023-V-034 (predavanje,međunarodna recenzija,objavljeni rad,stručni).
|
|
|
|
|
|
|
| |
Sažeci u zbornicima skupova
|
| |
1. Konjatić, Pejo; Kozak, Dražan; Gubeljak, Nenad; Predan, Jožef; Matejiček, Franjo.
Yield load solution for the SE(B) fracture toughness specimen with heterogeneous welded joint // Third M.I.T. Conference on Computational Fluid and Solid Mechanics.
Cambridge (MA), 2005. (predavanje,međunarodna recenzija,sažetak,znanstveni).
|
2. Kozak, Dražan; Vojvodič-Tuma, Jelena; Gubeljak, Nenad; Semenski, Damir.
Factors influencing the yielding constraint by cracked welded components // Program and book of abstracts of 12th Conference on Materials and Technology / Jenko, Monika (ur.).
Ljubljana : Inštitut za kovinske materiale in tehnologije, 2004. 79-79 (pozvano predavanje,međunarodna recenzija,sažetak,znanstveni).
|
3. Vojvodič-Tuma, Jelena; Celin, Roman; Šuštaršič, Borivoj; Kmetič, Dimitrij; Gubeljak, Nenad; Kozak, Dražan; Matejiček, Franjo; Kljajin, Milan; Semenski, Damir.
Medobratovalni pregledi cevovodov in tlačnih posod ter analitična analiza tlačne posode po ASME // Program and Book of abstracts of 12th Conference on Materials and Technology / Jenko, Monika (ur.).
Ljubljana : Inštitut za kovinske materiale in tehnologije, 2004. 116-116 (poster,međunarodna recenzija,sažetak,znanstveni).
|
|
|
|
|
|
|
| |
Diplomski radovi
|
| |
|
|
|
|
Sadržaj objavljen na bib.irb.hr (osim ako je drugačaije navedeno) podložan je pravilima Creative Commons licence
