Hrvatska znanstvena bibliografija (CROSBI)




Subota 21. Rujan 2019

 
 
 
 
  Uredničke knjige
 

1. Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries - ATDC'05 / Kljajin, Milan; Katalinić, Branko; Budić, Ivan (ur.).
Vienna, Osijek, Slavonski Brod : Danube Adria Association for Automation & Manufacturing International , Josip Juraj Strossmayer University of Osijek - Mechanical Engineering Faculty in Slavonski Brod ; DAAAM International ViennaUniversity of Josip Juraj Strossmayer, Mechanical Engineering Faculty, 2005 (zbornik).

2. Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries - ATDC'02 / Katalinić, Branko; Kljajin, Milan (ur.).
Slavonski Brod : DAAAM International Vienna, 2002 (zbornik).
 
  Poglavlja u knjizi
 

1. Kozak, Dražan; Kljajin, Milan; Semenski, Damir.
Influence of the Stress-State on the J-Integral Value by Fracture Toughness Specimens with Medium Thickness // DAAAM International Scientific Book 2003 / Katalinic, Branko (ur.).
Beč : DAAAM International Vienna, 2003. Str. 339-346.
 
  Udžbenici i skripta
 

1. Opalić, Milan; Kljajin, Milan; Sebastijanović, Slavko.
Tehničko crtanje .
Čakovec : Zinski d.d., 2003.
 
  Znanstveni radovi u drugim časopisima
 

1. Marušić, Vlatko; Kljajin, Milan; Penava, Andrijana.
Possibility of tribological loss reduction by applying welded layers to the working parts of worm-presses in oil mills. // Tehnički vjesnik/Technical Gazette. 12 (2005) , 3/4; 11-16 (prethodno priopćenje, znanstveni).
 
  Ostali radovi u drugim časopisima
 

1. Tunjić, Đuro; Kljajin, Milan; Maglić Leon.
Uvođenje sustava upravljanja kvalitetom u visokoškolske ustanove. // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku. 12 (2005) , 1/2; 39-47 (članak, stručni).
 
  Plenarna izlaganja
 

1. Vnučec, Zdravko.
Korištenje informacijske tehnologije u suvremenoj visokoškolskoj nastavi // 55. međunarodna konferencija o proizvodnji, inženjeringu, razvoju i modernizaciji proizvodnje Matematsko modeliranje mehaničkih oscilacija primjenom fenomenološke analize : knjiga sažetaka = 55th International Conference of Producing Engineering, Development and Modernization of Production (RIM 2005) Mathematical modeling of mechanical oscillations by applying phenomenological analysis : abstracts / Isak Karabegović, Milan Jurković, Vlatko Doleček (ur.).
Bihać : Društvo za robotiku BiH, 2005. 817-820 (plenarno predavanje,međunarodna recenzija,objavljeni rad).

2. Kozak, Dražan; Gubeljak, Nenad; Matejiček, Franjo; Oblak, Maks.
Distribution of Stresses in the Vicinity of Straight Crack Front with Present Materials Dissimilarity // Proceedings of the 2003 International Conference on Computational & Experimental Engineering & Sciences / C.A. Herrera (ur.).
Encino, California, USA : Tech Science Press, 2003. (plenarno predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
 
  Znanstveni radovi u zbornicima skupova s međunar.rec.
 

1. Galeta, Tomislav; Kljajin, Milan; Karakašić; Mirko.
Product Model Suited for the ERP System // Design 2006. Zbornik radova / Marjanović, Dorian (ur.).
Zagreb/Glasgow : Faculty of Mechanical Engineering and Naval Architecture & Design Society, 2006. 535-540 (poster,međunarodna recenzija,objavljeni rad,znanstveni).

2. Ivandić, Željko; Kljajin, Milan; Duhovnik, Jože.
The Model Evaluations of Product Properties in the Conceptual Phase // Proceedings of the Sixth International Sxmposium on Tools and Methods of Competitive Engineering (TMCE 2006) / Horváth, Imre ; Duhovnik, Jože (ur.).
Delft ; Ljubljana : University of Technology ; Faculty of Mechanical Engineering, 2006. 1439-1451 (poster,međunarodna recenzija,objavljeni rad,znanstveni).

3. Kljajin, Milan.
Quality Aspects in the Sector of Waste from Electrical and Electronic Equipment (WEEE) // AMST '05 Advanced Manufacturing Systems and Technology / Elso Kuljanic (ur.).
Wien-New York : Springer, 2005. 663-672 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

4. Kljajin, Milan; Ivandić, Željko; Karakašić, Mirko; Galić, Zoran.
Conceptual Design in the Solid Fuel Oven Development // Proceedings the 4th DAAAM International Conference on Advanced Technologies for Developing Countries / Kljajin, Milan ; Katalinić, Branko ; Budić, Ivan (ur.).
Slavonski Brod ; Wienna : Mechanical Engineering Faculty of Mechanical Engineering ; DAAAM International, 2005. 109-114 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

5. Opalić, Milan; Kljajin, Milan.
Biomechanical Joints as Tribolgy System // Proceedings of the BalkanTrib '05 / Branko Ivkovic (ur.).
Kragujevac : Yugoslav Tribology Society, 2005. 415-419 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

6. Vnučec, Zdravko.
ANALYSIS OF THE LAMINATED COMPOSITE PLATE UNDER COMBINED LOADS // "RIM 2005 – ; Development and Modernization of Production", ISBN 99589262-0-2 / Isak Karabegović, Milan Jurković, Vlatko Doleček (ur.).
Bihać, Bosna i Hercegovina : Društvo za robotiku BiH, 2005. 143-148 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

7. Vnučec, Zdravko; Kljajin, Milan.
THE ANALYSIS OF FAILURES OF THE LAMINATED COMPOSITE STRUCTURES WITH HOLES // Proceedings / 9th International Research/Expert Conference “ ; ; Trends in the Development of Machinery and Associated Technology” ; ; ; TMT 2005, ISBN 9958-617-28-5 / Dr. Sabahudin Ekinović, dr. Senay Yalcin, dr. Joan Vivancos Calvet (ur.).
Antalya, Turkey : Faculty of Mechanical Engineering in Zenica, Bosnia and Herzegovina, etc., 2005. 1029-1032 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

8. Kljajin, Milan; Galeta, Tomislav.
Metrics for the PDM functionality of ERP system // Proceedings of the Design 2004 / Marjanović, Dorian (ur.).
Zagreb ; Glasgow : Faculty of Mechanical Engineerign and Naval Architecture ; The Design Society, 2004. 859-864 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

9. Kljajin, Milan; Ivandić, Željko; Kozak, Dražan.
Multiple attribute decision making towards most acceptable variant solution // Proceedings of the Design 2004 / Marjanović, Dorian (ur.).
Zagreb ; Glasgow : Faculty of Mechanical Engineering and Naval Architecture ; The Design Society, 2004. 1425-1430 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

10. Kljajin, Milan; Opalić, Milan.
Product disassembly sequences approach in the early stages of product design // Proceedings of the Design 2004 / Marjanović, Dorian (ur.).
Zagreb ; Gasgow : Faculty of Mechanical Engineering and Naval Architecture ; The Design Society, 2004. 1093-1098 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

11. Kozak, Dražan; Kljajin, Milan; Ivandić, Željko.
Yield load solutions for X-shaped weldment with present mechanical heterogeneity // Annals of DAAAM for 2004 & Proceedings of the 15th International DAAAM Symposium / Katalinić, Branko (ur.).
Vienna : DAAAM International, 2004. 233-234 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

12. Vnučec, Zdravko; Kljajin, Milan.
The influence of stress concentration on design of laminated composite structures // Proceedings of 8th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology", TMT 2004 / Ekinović, Sabahudin ; Brdarević, Safet ; Vivancos Calvet, Joan ; Puerta Sales, Ferran (ur.).
Zenica, Bosna i Hercegovina : Faculty of Mechanical Engineering in Zenica, 2004. 439-442 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

13. Vnučec, Zdravko; Kozak, Dražan; Ergić, Todor.
The influence of human behaviors on the sitting pressure distribution // Proceedings of 8th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology", TMT 2004 / Ekinović, Sabahudin ; Brdarević, Safet ; Vivancos Calvet, Joan ; Puerta Sales, Ferran (ur.).
Zenica, Bosnia and Herzegovina : Faculty of Mechanical Engineering in Zenica, 2004. 431-434 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

14. Ergić, Todor; Vnučec, Zdravko; Muftić, Osman.
THE INFLUENCE OF THE REDUNDANT MOVING ON THE PRESSURE MAGNITUDE VARIATION BY MEN SITTING // Proceedings of the 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (TU Osijek, Croatia) (ur.).
Zagreb : Croatian Society of Mechanics, Zagreb, 2003. 151-157 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

15. Gubeljak, Nenad; Kozak, Dražan; Matejiček, Franjo; Oblak, Maks.
Experimental and Numerical Analysis of Strength Overmatched Weld Root Passes on the Heat Affected Zone Fracture Behaviour // Extended Abstracts and Proceedings (CD-ROM Edition) of the 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (ur.).
Zagreb : Croatian Society of Mechanics, 2003. 183-190 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

16. Ivandić, Željko; Kozak, Dražan; Kljajin, Milan.
The Evaluation Procedure of Butt Weld Cruciform Detail // Proceedings of the 7th International Research/Expert Conference 'Trends in the Development of Machinery and Associated Technology' (TMT 2003) / Vivancos Calvet, Joan ; Puerta Sales, Ferran ; Ekinović, Sabahudin ; Brdarević, Safet (ur.).
Zenica ; Barcelona : Faculty of Mechanical Engineering ; Escola Tecnica Superiora D'Enginyeria Industrial, 2003. 645-648 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

17. Kljajin, Milan.
Foundation of Information Modelling in Tools Development // ICIT 2003: 4th International Conference on Industrial Tools / Kuzman, Karl (ur.).
Celje : TECOS Slovenian Tool and Die Development Centre, 2003. 457-462 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

18. Kozak, Dražan; Blaj, Liliana; Matejiček, Franjo.
State of Stress Modelling by 2-D Finite Element Analysis of Fracture Toughness Specimens // Proceedings of the 6th International Conference on Boundary and Finite Element / Dobre, Ionel ; Faur, Nicolae (ur.).
Timisoara : Editura Politehnica, 2003. 303-312 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

19. Kozak, Dražan; Ivandić, Željko; Kljajin, Milan.
Decision making model based on grading approach // Proceedings of the International Conference on Industrial Logistics / Barros, L. ; Helo, P. ; Kekäle, T. (ur.).
Vaasa : International Centre for Innovation and Industrial Logistics (ICIIL), 2003. 307-312 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

20. Kozak, Dražan; Kljajin, Milan; Ivandić, Željko.
New engineering concepts of structural integrity // Proceedings of the 2nd DAAAM International Conference on Advanced Technologies for Developing Countries (ATDC'03) / Katalinić, Branko ; Tufekčić, Džemo and Šelo, Ramiz (ur.).
Vienna ; Tuzla : DAAAM International ; University of Tuzla, 2003. 31-36 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

21. Matejiček, Franjo; Kozak, Dražan; Konjatić, Pejo.
Fracture Behaviour of High-Ductile CCT Specimen Under Elastic-Plastic Conditions // Extended Abstracts and Proceedings (CD-ROM Edition)of the 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (ur.).
Zagreb : Croatian Society of Mechanics, 2003. 601-608 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

22. Sebastijanović, Slavko; Ergić, Todor; Ivandić, Željko.
Defining the Process of Designing Machine Elements Based on the Distribution of Reliability Factors // Proceedings of the 2nd DAAAM International Conference on Advanced Technologies for Developing Countries (ATDC'03) / Katalinić, Branko ; Tufekčić, Džemo ; Šelo, Ramiz (ur.).
Vienna ; Tuzla : DAAAM International ; University of Tuzla, 2003. 103-108 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

23. Sedmak, Aleksandar; Kozak, Dražan; Adžiev, Gorgi; Matejiček, Franjo; Gubeljak, Nenad.
Conservation Law of J Integral Type for Multi-Material Body // Extended Abstracts and Proceedings (CD-ROM Edition)of the 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (ur.).
Zagreb : Croatian Society of Mechanics, 2003. 645-650 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

24. Ivandić, Željko; Kljajin, Milan; Ergić, Todor.
The Procedure For Defining Weight In Evaluation Conceptual Design // Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium "Inteligent Manufacturing & Automation : Learning from Nature" / Katalinic, Branko (ur.).
Vienna : DAAAM International, 2002. 227-228 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

25. Kljajin, Milan.
Some Methods for Finding Product Solutions // Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium / Katalinic, Branko (ur.).
Vienna, Austria : DAAAM International, 2002. 265-266 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

26. Kljajin, Milan.
Evaluation of DFX Tools in Ecodesign // Proceedings of the 6th International Conference on Advanced Manufacturing Systems and Technology - AMST2002 / Kuljanic, Elso (ur.).
Wien/New York : Springer Verlag, 2002. 679-686 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

27. Kljajin, Milan.
Approaches to System Complexity in the Early Stage of Product Design // Proceedings of ESDA2002: 6th Biennial Conference on Engineering Systems Design and Analysis.
Istambul : ASME International, 2002. 1-6 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

28. Kozak, Dražan; Gubeljak, Nenad; Matejiček, Franjo; Oblak, Maks.
Spreading of Plastic Zones by Heterogeneous Fracture Toughness Specimens Cracked in the HAZ // Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić, Branko ; Kljajin, Milan (ur.).
Osijek : Grafika, 2002. 35-40 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

29. Kozak, Dražan; Kljajin, Milan; Semenski, Damir.
Influence of the stress state on the J-integral value by fracture toughness specimens with medium thickness // Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Learning from Nature' / Katalinić, Branko (ur.).
Vienna : DAAAM International Vienna, 2002. 287-288 (poster,međunarodna recenzija,objavljeni rad,znanstveni).

30. Kozak, Dražan; Sedmak, Aleksandar; Adžiev Gjorgji; Gubeljak, Nenad.
Application of J-integral to strength mismatch welded structures // Proceedings of the 6th International Research/Expert Conference 'Trends in the development of machinery and associated technology' / Brdarević, Safet ; Ekinović, Sabahudin ; Compamys, Pascual Ramon (ur.).
Zenica : Faculty of Mechanical Engineering in Zenica, 2002. 353-356 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

31. Raos, Pero; Matejiček, Franjo; Lucić, Mirjana.
Experimental investigation on mechanical characteristics of adhesively bonded single-lap joints // Proceedings of the 1st DAAAM International Conference, Advanced Technologies for Developing Countries, ATDC'02, / Katalinić, B. ; Kljajin, M. (ur.).
Slavonski Brod : DAAAM International & Mech. eng. Faculty Slav. Brod, 2002. 517-520 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

32. Raos, Pero; Stoić, Antun; Kopač, Janez.
Identification of cutting conditions in turning by noise recording // Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić B. & Kljajin M. (ur.).
Slavonski Brod : DAAAM International & Mech. eng. Faculty Slav. Brod, 2002. 527-532 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

33. Sebastijanović, Slavko; Ivandić, Željko; Ergić, Todor.
Contribution to the Research on Sealing Large Surfaces // Proceedings of the 1st DAAAM International Conference Advanced Technologies for Developing Countries (ATDC'02) / Katalinić, Branko ; Kljajin, Milan (ur.).
Vienna ; Osijek : DAAAM International ; Mechanical Engineering Faculty of Slavonski Brod, 2002. 45-50 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).

34. Vnučec, Zdravko.
INFLUENCE OF LAMINATION ANGLES ON THE STRESSES AND STRAINS VALUES IN THE LAMINATED COMPOSITE PLATES // ATDC&#8217 ; 02 Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić, Branko (TU Vienna, Austria) & Kljajin, Milan (TU Osijek, Croatia) (ur.).
Slavonski Brod, Hrvatska : DAAAM International Vienna ; University of Josip Juraj Strossmayer in Osijek ; Mechanical Engineering Faculty in Slavonski Brod ; Grafika Osijek, 2002. 93-98 (predavanje,međunarodna recenzija,objavljeni rad,znanstveni).
 
  Drugi radovi u zbornicima skupova s recenzijom
 

1. Ergić, Todor; Stoić, Antun; Konjatić, Pejo.
Dynamic Analysis of Machine and Worpiece Instability in Turning // Proceedings of the 4th International Conference Advanced Technologies for Developing Contries ATDC 2005 / Kljain, Milan ; Katalinić, Branko ; Budić, Ivan (ur.).
Slavonski Brod : Grafika Osijek, 2005. 497-502 (poster,međunarodna recenzija,objavljeni rad).

2. Vnučec, Zdravko; Ergić, Todor.
Unapređenje obrazovne tehnologije u visokoškolskoj nastavi // Zbornik radova 7. međunarodnog naučno-stručnog skupa o dostignućima elektro i mašinske industrije = Proceedings 7th International Conference on Accomplishments of Electrical and Mechanical Industries DEMI 2005 / Rogić, Miroslav (ur.).
Banja Luka : Mašinski fakultet Banja Luka, 2005. 59-62 (predavanje,međunarodna recenzija,objavljeni rad).

3. Kljajin, Milan; Kozak, Dražan; Ivandić, Željko.
Copper recovery from waste of electrical and electronic equipment // Annals of DAAAM for 2003 & Proceedings of the 14th INTERNATIONAL DAAAM SYMPOSIUM "Intelligent Manufacturing & Automation: Focus on Reconstruction and Development" / Katalinic, Branko (ur.).
Vienna : DAAAM International, 2003. 231-232 (poster,međunarodna recenzija,objavljeni rad).

4. Hnatko, Emil; Majdandžić, Niko; Ergić, Todor; Stoić, Antun; Šarić, Tomislav; Jozić, Marko; Tadijanović, Adam.
Application of the Milling Machine Vibration Signal for Cutter Condition Monitoring // Proceedings of the 1st DAAAM International Conference, Advanced Technologies for Developing Countries, ATDC'02 / Katalinić, Branko ; Kljajin, Milan (ur.). (ur.).
Osijek : Grafika : DAAAM International Vienna& Mech. eng. Faculty Slav. Brod & Grafika Osijek, 2002. 483-488 (predavanje,međunarodna recenzija,objavljeni rad).
 
  Sažeci u zbornicima skupova
 

1. Kozak, Dražan; Vojvodič-Tuma, Jelena; Gubeljak, Nenad; Semenski, Damir.
Factors influencing the yielding constraint by cracked welded components // Program and book of abstracts of 12th Conference on Materials and Technology / Jenko, Monika (ur.).
Ljubljana : Inštitut za kovinske materiale in tehnologije, 2004. 79-79 (pozvano predavanje,međunarodna recenzija,sažetak,znanstveni).

2. Vojvodič-Tuma, Jelena; Celin, Roman; Šuštaršič, Borivoj; Kmetič, Dimitrij; Gubeljak, Nenad; Kozak, Dražan; Matejiček, Franjo; Kljajin, Milan; Semenski, Damir.
Medobratovalni pregledi cevovodov in tlačnih posod ter analitična analiza tlačne posode po ASME // Program and Book of abstracts of 12th Conference on Materials and Technology / Jenko, Monika (ur.).
Ljubljana : Inštitut za kovinske materiale in tehnologije, 2004. 116-116 (poster,međunarodna recenzija,sažetak,znanstveni).
 
  Disertacije
 

1. Ivandić, Željko.
Koncepcijsko vrednovanje konstrukcijskih značajki / doktorska disertacija.
Zagreb : Fakultet strojarstva i brodogradnje, 25.11. 2002., VII+156 str. str. Voditelj: Marjanović, Dorian.

2. Stoić, Antun.
Obradivost tvrdih materijala visokobrzinskim tokarenjem / doktorska disertacija.
Zagreb : Fakultet strojarstva i brodogradnje, 01.07. 2002., XV+116 str. Voditelj: Cebalo, Roko.
 
  Diplomski radovi
 

1. Galić, Zoran.
Koncipiranje, oblikovanje i metodička razrada peći na kruto gorivo / diplomski rad.
Slavonski Brod : Strojarski fakultet, 24.02. 2005., 60 str. Voditelj: Kljajin, Milan.