|
|
metallurgy
(2.08)
| |
|
|
| |
Author's books
|
| |
1. Bukhanovsky, V.; Rudnitsky, N.; Mamuzić, Ilija.
Layered electro-contact materials based on copper, chromium and tungsten : production technology, structure, mechanical and performance properties
.
Saarbrucken, Germany : LAP LAMBERT Academic Publishing GmbH Co, 2012 (monograph).
|
2. Mamuzić, Ilija.
Metallurgy, always prosperity for humanity
.
Zagreb : Hrvatsko metalurško društvo, 2012 (monograph).
|
3. Gojić, Mirko.
Fifty years of studies of metallurgy
.
Sisak : Metalurški fakultet Sveučilišta u Zagrebu, 2010 (monograph).
|
4. Katavić, Ivan.
Introduction to materials
.
Rijeka : Fintrade&Tours d.o.o., 2008 (monograph).
|
|
|
|
|
| |
Editor's books
|
| |
1.
Proceedings of International Conference on Innovative Technologies IN-TECH 2012
/ Car, Zlatan; Kudláček, Jan; Pepelnjak, Tomaž, editor(s).
Rijeka : Faculty of Engineering University of Rijeka, 2012 (proceedings).
|
2.
Proceedings of International Conference on Innovative Technologies IN-TECH 2011
/ Kudlaček, Jan; Car, Zlatan; Barišić, Branimir; Pepelnjak, Tomaž; Pakosta, Michal; Kršulja, Marko, editor(s).
Prag : Tisk AS, s.r.o., Jaroměř, 2011 (proceedings).
|
3.
Proceedings of International Conference on Innovative Technologies IN-TECH 2010
/ Kudlaček, Jan; Barišić, Branimir; Velay, Xavier; Ohkura, Kazuhiro, editor(s).
Prague : Tisk AS, 2010 (proceedings).
|
|
|
|
|
|
|
| |
Book chapters
|
| |
1. Čelebić, Asja; Svetličić, Vesna; Malina, Jadranka; Klaić, Boris.
Co-Cr-Mo Alloy surface features and composition prior and after mechanical polishing and corrosion in fluids simulating oral conditions // Biomaterials Developments and Applications / Bourg, Henri ; Lisle, Amaury, editor(s).
New York : Nova Science Publishing, 2010.
Str. 415-433.
|
2. Hršak, Damir; Bermanec, Vladimir; Lazić, Ladislav.
Serpentinite of Zrinska Gora Mountain as Mineral Raw Material // Zrinska gora regionalni park prirode / Bučar, Matija, editor(s).
Petrinja : Grad Petrinja, Sisačko - moslavačka županija, Sveučilište u Zagrebu Učiteljski fakultet Odsjek Petrinja, Matica hrvatska Ogranak Petrinja, 2010.
Str. 334-339.
|
3. Lazić, Ladislav; Durman, Aleksandar; Lazić, Silvana.
Historical Overview of Mining and Metallurgy on the Territory of Trgovska Gora Montain and Zrinska Gora Mountain // Zrinska gora regionalni park prirode / Bučar, Matija, editor(s).
Petrinja : Grad Petrinja, Sisačko - moslavačka županija, Sveučilište u Zagrebu Učiteljski fakultet Odsjek Petrinja, Matica hrvatska Ogranak Petrinja, 2010..
Str. 56-71.
|
4. Lazić, Ladislav; Brovkin, V. L.; Gupalo, V. I.; Gupalo, E. V.
Radiative heat transfer in chamber furnaces with flat-flame burners // Metallurgicheskaya teplotehnika / Veličko, O.G., editor(s).
Dnepropetrovsk : Novaja ideologija, 2008.
Str. 182-197.
|
5. Lazić, Ladislav; Varga, Augustin; Brovkin, Vladimir L.; Kizek, Jan.
Influence analysis of the structural defects in the casting load on the heating rate // Metallurgicheskaya teplotehnika / Veličko, O.G., editor(s).
Dnepropetrovsk : Novaja ideologija, 2008.
Str. 307-317.
|
6. Mihok, L.; Mamuzić, Ilija.
Beginnings of iron metallurgy on territories of Croatia and Slovakia // Carpatica - Karpatika / Vegeš, M. M. et al., editor(s).
Užgorod : Vidavničtvo UŽNU, 2008.
Str. 3-14.
|
|
|
|
|
|
|
| |
Textbooks and scripts
|
| |
1. Rađenović, Ankica.
Information Science / Rađenović, Ankica, editor(s).
Sisak : Metalurški fakultet, 2012.
|
2. Oruč, Mirsada; Muhamedagić, Sulejman; Vitez, Ivan.
Methods of controling proceses and products - Metalurgy - / Čičak, Faik, editor(s).
Zenica : Univerzitet u Zenici, Fakultet za metalurgiju i materijale Zenica, 2011.
|
3. Gojić, Mirko.
Surface engineering / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet Sveučilišta u Zagrebu, 2010.
|
4. Kožuh, Stjepan.
Special steels / Kožuh, Stjepan, editor(s).
Sisak : Metalurški fakultet, 2010. 
|
5. Matković, Tanja; Matković, Prosper; Slokar, Ljerka.
Science of metals - Colection of solved problems / Matković, Tanja ; Matković, Prosper, editor(s).
Sisak : Metalurški fakultet, 2010.
|
6. Rađenović, Ankica.
Refractories / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2010.
|
7. Matković, Tanja; Matković, Prosper.
Physical Metallurgy I / Matković, Tanja ; Matković, Prosper, editor(s).
Sisak : Metalurški fakultet, 2009.
|
8. Gojić, Mirko.
Techniques for materials joining and separation - 2nd unchanged edition / Matković, Prosper, editor(s).
Sisak : Metalurški fakultet, 2008.
|
9. Hršak, Damir.
Hydrometallurgy / Matković, Prosper, editor(s).
Zagreb : Metalurški fakultet Sisak, 2008.
|
10. Vitez, Ivan; Kladarić, Ivica; Marušić, Vlatko.
Fundamentals of metals productions and designations -.
Slavonski Brod : Strojarski fakultet u Slavonskom Brodu, 2008..
|
11. Lazić, Ladislav.
Numerical Methods in Heat Analysis / Matković, Prosper, editor(s).
Sisak : Metalurški fakultet, 2007.
|
|
|
|
|
|
|
| |
Journal articles and review articles in CC journals
|
| |
1. Dragana Živković; Ljubiša Balanović; Dragan Manasijević; Tamara Holjevac Grgurić; Dijana Ćubela; Aleksandra Mitovski.
Comparative thermodynamic analysis and phase diagram prediction of the Ga-Sn-Zn system. // International Journal of Materials Research. 104 (2013) , 1; 26-34 (journal article).
|
2. Kosec, Ladislav; Šavli, Štefan; Kožuh, Stjepan; Holjevac Grgurić, Tamara; Nagode, Aleš; Kosec, Gorazd; Dražić, Goran; Gojić, Mirko.
Transformation of austenite during isothermal annealing at 600-900 °C for heat-resistant stainless steel. // Journal of alloys and compounds. 567 (2013) ; 59-64 (journal article).
|
3. Kožuh, Stjepan; Gojić, Mirko; Vrsalović, Ladislav; Ivković, Boško.
Corrosion failure and microstructure analysis of AISI 316L stainless steels for ship pipeline before and after welding. // KOVOVE MATERIALY-METALLIC MATERIALS. 51 (2013) , 1; 53-61 (journal article).
|
4. Begić Hadžipašić, Anita; Malina, Jadranka; Nižnik, Štefan.
Influence of microstructure on hydrogen diffusion and impedance of IF-steel. // KOVOVE MATERIALY-METALLIC MATERIALS. 50 (2012) , 5; 345-350 (journal article).
|
5. Dolić, Natalija; Medved, Jožef; Mrvar, Primož; Unkić, Faruk.
Influence of Cooling Rates on Temperatures Phase Transitions and on Microstructure of Aluminium Alloy EN AW-5083. // MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK. 43 (2012) , 11; 957-964 (journal article).
|
6. Glavaš, Zoran.
The influence of metallic charge on metallurgical quality and properties of ductile iron. // KOVOVE MATERIALY-METALLIC MATERIALS. 50 (2012.) , 2; 75-82 (journal article).
|
7. Nagode, Aleš; Klančnik, Grega; Schwarczova, Heidy; Kosec, Borut; Gojić, Mirko; Kosec, Ladislav.
Analyses of defects on the surface of hot plates for an electric stove. // ENGINEERING FAILURE ANALYSIS. 23 (2012) ; 82-89 (journal article).
|
8. Sofilić, Tahir; Jendričko, Judit; Kovačević, Zoran; Ćosić, Mario.
Measurement of polychlorinated dibenzo-p-dioxin and dibenzofuran emission from EAF steel making proces. // ARCHIVES OF METALLURGY AND MATERIALS. 57 (2012) , 3; 811-821 (journal article). 
|
9. Zovko Brodarac, Zdenka; Unkić, Faruk; Medved, Jožef; Mrvar, Primož.
Determination of solidification sequence of the AlMg9 alloy. // KOVOVE MATERIALY-METALLIC MATERIALS. 50 (2012) , 1; 59-67 (journal article).
|
10. Begić Hadžipašić, Anita; Malina, Jadranka; Malina, Marijan.
The influence of microstructure on hydrogen diffusion and embrittlement of multiphase fine- grained steels with increased plasticity and strength. // Chemical and biochemical engeenering quartely. 25 (2011) , 2; 159-169 (journal article).
|
11. Bukhanovskii, V.V.; Minakova, R.V.; Grechanyuk, I.N.; Mamuzić, Ilija; Rudnitskii, N.P.
Effect of composition and heat treatment on the structure and properties of condensed composites of the Cu – W system. // Metal science and heat treatment. 53 (2011) , 1-2; 14-23 (journal article).
|
12. Bukhanovsky, V.V.; Grechanyuk, N.I.; Minakova, R.V.; Mamuzić, Ilija; Kharchenko, V.V.; Rudnitsky, N.P.
Production technology, structure and properties of Cu–W layered composite condensed materials for electrical contacts. // International journal of refractory metals & hard materials. 29 (2011) , 5; 573-581 (journal article).
|
13. Gojić, Mirko; Nagode, Aleš; Kosec, Borut; Kožuh, Stjepan; Šavli, Štefan; Holjevac Grgurić, Tamara; Kosec, Ladislav.
Failure of steel pipes for hot air supply. // Engineering failure analysis. 18 (2011) ; 2330-2335 (preliminary note).
|
14. Gojić, Mirko; Vrsalović, Ladislav; Kožuh, Stjepan; Kneissl, Albert; Anžel, Ivan; Gudić, Senka; Kosec, Borut; Kliškić, Maja.
Electrochemical and microstructural study of Cu-Al-Ni shape memory alloy. // Journal of alloys and compounds. 509 (2011) , 41; 9782-9790 (journal article).
|
15. Lazić, Ladislav; Brovkin, Vladimir L.; Gupalo Vjacheslav; Gupalo, Elena, V.
Numerical and experimental study of the application of roof flat-flame burners. // Applied thermal engineering. 31 (2011) , 4; 513-520 (journal article).
|
16. Nemet, Miroslav; Mihalikova, Maria; Mamuzić, Ilija.
Comparison of stress and deformation characteristics of the automotive steels sheets. // Chemicke listy. 105 (2011) , S.I. 15; s549-s551 (journal article).
|
17. Netinger, Ivanka; Bjegović, Dubravka; Vrhovac, Goran.
Utilisation of steel slag as an aggregate in concrete. // Materials and structures. 44 (2011) , 9; 1565-1575 (journal article).
|
18. Štrkalj, Anita; Rađenović, Ankica; Malina, Jadranka.
Use of waste anode dust for sorption of Ni(II) from aqueous solution. // Canadian metallurgical quarterly. 50 (2011) , 1; 3-9 (journal article).
|
19. Begić Hadžipašić, Anita; Malina, Jadranka; Matković, Tanja.
Passivity of Co-Cr-Mo alloys in lactic acid solutions. // Kovové materiály. 48 (2010) , 4; 265-270 (journal article).
|
20. Dutour Sikirić, Mathieu; Delgado-Friedrichs, Olaf; Deza, Michel.
Space fullerenes : computer search for new Frank-Kasper structures. // Acta Crystallographica - Section a - Foundations of Crystallography. 66 (2010) , 5; 602-615 (journal article).
|
21. Glavaš, Zoran; Unkić, Faruk; Lisjak, Dragutin.
The prediction of the microstructure constituents of spheroidal graphite cast iron by using thermal analysis and artificial neural networks. // Archives of metallurgy and materials. 55 (2010) , 1; 247-253 (journal article).
|
22. Netinger, Ivanka; Bjegović, Dubravka; Mladenovič, Ana.
Fire Resistance of Steel Slag Aggregates Concrete. // High temperature materials and processes. 29 (2010) , 1/2; 77-87 (journal article).
|
23. Rađenović, Ankica; Malina, Jadranka; Štrkalj, Anita.
Removal of Ni2+ from aqueous solution by blast furnace sludge as an adsorbent. // Desalination and Water Treatment. 21 (2010) ; 286-294 (journal article).
|
24. Schröder, Winfried; Holy, Marcel; Pesch, Roland; Harmens, Harry; Ilyin, Ilia; Steinnes, Eiliv; Alber, Renate; Aleksiayenak, Yuliya; Blum, Oleg; Coskun, Mahmut; Dam, Maria; De Temmerman, Ludwig; Frovola, Marina; Frontasyeva, Marina; Gonzales Miqueo, Laura; Grodzinska, Krystyna; Jeran, Zvonka; Korzekwa, Szymon; Krmar, Miodrag; Kubin, Eero; Kvietkus, Kestutis; Leblond, Sébastien; Liiv, Siiri; Magnusson, Sigurdur; Mankovská, Blanka; Piispanen, Juha; Rühling, Ake; Santamaria, Jesus; Špirić, Zdravko; Suchara, Ivan; Thöni, Lotti; Urumov, Viktor; Yurukova, L.ilyana; Zechmeister, Harald G.
Are cadmium, lead and mercury concentrations in mosses across Europe primarily determined by atmospheric deposition of these metals?. // Journal of Soils and Sediments. 10 (2010) , 8; 1578-1584 (journal article).
|
25. Sofilić, Tahir; Barišić, Delko; Rastovčan Mioč, Alenka; Sofilić, Una.
Radionuclides in steel slag intended for road construction. // Journal of radioanalytical and nuclear chemistry. 284 (2010) , 1; 73-77 (journal article).
|
26. Sofilić, Tahir; Barišić, Delko; Sofilić, Una.
Monitoring of Cs-137 in Electric Arc Furnace Steel Making Process. // Journal of radioanalytical and nuclear chemistry. 284 (2010) , 3; 615-622 (journal article).
|
27. Begić Hadžipašić, Anita; Malina, Jadranka; Malina, Marijan.
The influence of hydrogen on the frangibility of modern structural steels processed at a CSP-plant. // Strojarstvo : časopis za teoriju i praksu u strojarstvu. 51 (2009) , 6; 529-535 (journal article).
|
28. Bukhanovskii, V.V.; Rudnitskii, N.P.; Mamuzić, Ilija; Minakova, R.V.; Grechanyuk, N.I.
Effect of composition and process factors on the structure, mechanical properties, and fracture behavior of a composite material of the copper – chromium system. // Metal science and heat treatment. 51 (2009) , 7/8; 388-393 (journal article).
|
29. Bukhanovsky, V. V.; Rudnitsky, N. P.; Mamuzić, Ilija.
Effect of temperature on mechanical characteristics of copper-chromium composite. // Materials Science and Technology. 25 (2009) , 8; 1057-1061 (journal article).
|
30. Kožuh, Stjepan; Gojić, Mirko; Kosec, Ladislav.
Mechanical properties and microstructure of austenitic stainless steel after welding and post-weld heat treatment. // Kovové Materiály. 47 (2009) , 4; 253-262 (journal article).
|
31. Rađenović, Ankica; Malina, Jadranka.
Adsorption of Organic Acids on Blast Furnace Sludge. // Chemical and Biochemical Engineering Quarterly. 23 (2009) , 2; 187-193 (journal article).
|
32. Zovko Brodarac, Zdenka; Mrvar, Primož; Medved, Jožef.
Temperature interval determination for the performing local squeezing casting process on the AlSi10Mg alloy castings. // Kovove Materialy. 47 (2009) , 3; 209-214 (journal article).
|
33. Barišić, Branimir; Pepelnjak, Tomaž; Math, Miljenko.
Predicting of the Luders bands in the processing of TH material in computer environment by means of stochastic modeling. // Journal of materials processing technology. 203 (2008) , 1-3; 154-165 (journal article).
|
34. Bukanovsky, V. V.; Mamuzić, Ilija; Rudnitsky, N. P.
The effect of temperature on mechanical characteristic of copper - carbonic composite. // Kovové materiály. 46 (2008) , 1; 33-37 (journal article).
|
35. Bukhanovskii, V. V.; Mamuzić, Ilija.
Effect of high-temperature gas medium on the structure and mechanical characteristics of niobium alloy 10VMTs. // Metal Science and Heat Treatment. 50 (2008) , 3-4; 123-128 (journal article).
|
36. Kožuh, Stjepan; Gojić, Mirko; Kraljić Roković, Marijana.
The Effect of PWHT on Electrochemical Behaviour of AISI 316L Weld Metal. // Chemical and Biochemical Engineering Quarterly. 22 (2008) , 4; 421-431 (journal article).
|
37. Mathew, M. T.; Stack, M. M.; Matijević, Božidar; Rocha, L. A.; Ariza, E.
Micro-abrasion resistance of thermochemically treated steels in aqueous solutions: Mechanisms, maps, materials selection. // Tribology International. 41 (2008) , 2; 141-149 (journal article).
|
38. Rađenović, Ankica; Legin-Kolar, Mira.
The use of metallurgical coke as carburizing material in the foundry. // Strojarstvo. 50 (2008) , 4; 205-212 (journal article).
|
39. Unkić, Faruk; Glavaš, Zoran; Terzić, Katarina.
Influence of Nodule Count on Toughness of Ferritic Ductile Iron. // Strojarstvo. 50 (2008) , 4; 231-238 (journal article).
|
40. Glavaš, Zoran; Lisjak, Dragutin; Unkić, Faruk.
The application of artificial neural network in the prediction of the as-cast impact toughness of spheroidal graphite cast iron. // Kovove Materialy - Metallic Materials. 45 (2007) , 1; 41-49 (journal article).
|
41. Matijević, Božidar; Stupnišek, Mladen.
Improvements in Thermo Reactive Deposition of Carbide Layers. // Surface engineering. 23 (2007) , 1; 1-4 (journal article).
|
42. Pepelnjak, Tomaž; Barišić, Branimir.
Analysis and elimination of the stretcher strains on TH415 tinplate rings in the stamping process. // Journal of Materials Processing Technology. 186 (2007) , 1-3; 111-119 (journal article).
|
|
|
|
|
|
|
| |
Other papers in CC journals
|
| |
|
|
| |
Scientific papers in other journals
|
| |
1. Čarnogurska, Maria; Prihoda, Miroslav; Michal Kubik, Michal; Gallik Robert; Hršak, Damir.
Methodology of the Sediment Thickness Calculation on the Heat Exchange Area of a Coolers Natural Gas. // International Journal of Mechanic System Engineering. 3 (2013) , 1; 14-19 (journal article).
|
2. Čep, Robert; Janásek, Adam; Čepová, Lenka; Petrů, Jana; Hlavatý, Ivo; Car, Zlatan; Hatala, Michal.
Experimental Testing of Exchangeable Cutting Inserts Cutting Ability. // Tehnicki Vjesnik-Technical Gazette. 20 (2013) , 1; 21-26 (journal article).
|
3. Ćurčija, Dušan; Vodopivec, Franc; Mamuzić, Ilija.
Calculation of the lubricant layer for a coarse surface of a band and rolls. // Materiali in tehnologije. 47 (2013) , 1; 53-57 (journal article).
|
4. Gojić, Mirko; Kožuh, Stjepan; Anžel, Ivan; Lojen, Gorazd; Ivanić, Ivana; Kosec, Borut.
Microstructural and phase analysis of CuAlNi shape memory alloy after continuous casting. // Materiali in tehnologije-Materials and Technology. 47 (2013) , 2; 149-152 (journal article).
|
5. Matijević; Božidar.
A LOW TEMPERATURE ALUMINIZING TREATMENT OF HOT WORK TOOL STEEL. // Transactions of FAMENA. 37 (2013) , 1; 29-34 (journal article).
|
6. Prokhorenko, V. M.; Perepichay, A. O.; Mamuzić, Ilija; Čikić, A.
Reduction of longitudinal axial residual stresses in near-root region of circumferential joint of steam pipeline in technological way. // Metalurgija. 52 (2013) , 4; 449-452 (journal article).
|
7. Rađenović, Ankica; Malina, Jadranka, Matijašić Gordana.
The change in surface area properties of blast furnace sludge treated by citric acid. // Engineering review. 33 (2013) , 1; 15-21 (journal article).
|
8. Begić Hadžipašić, Anita; Hadžipašić, Hasan; Vrbanjac, Stjepan.
The influence of medium and microstructure on corosion rate of dual phase high-strength structural steels. // The Holistic Approach to Environment. 2 (2012) , 2; 73-84 (journal article).
|
9. Begić Hadžipašić, Anita; Malina, Jadranka; Zovko Brodarac, Zdenka.
The resistance of grey and vermicular cast iron to high temperature corrosion at 973 K. // Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo. 54 (2012) , 2-3; 45-52 (journal article).
|
10. Brillova, K.; Ohlidal, M.; Valiček, J.; Hloch, S.; Kozak, D; Ivandić, Ž.
Evaluation of abrasive waterjet produced titan surfaces topography by spectral analysis techniques. // METALURGIJA. 51 (2012) , 1; 39-42 (journal article).
|
11. Dolić, Natalija; Medved, Jožef; Mrvar, Primož; Unkić, Faruk.
INFLUENCE OF THE COOLING RATE ON THE MICROSTRUCTURE DEVELOPMENT OF THE EN AW-AlMg4.5Mn0.7 ALLOY. // Materiali in Tehnologije. 46 (2012) , 6; 563-571 (journal article).
|
12. Fabík, R.; Kliber, J.; Mamuzić, Ilija; Kubina, T. S. A. Aksenov.
Mathematical modelling of flat and long hot rolling based on finite element methods (FEM). // METALURGIJA. 51 (2012) , 3; 341-344 (review article).
|
13. Gojić, Mirko; Vrsalović, Ladislav; Kožuh, Stjepan; Ćubela, Diana; Gudić, Senka.
Microstructure and Corrosion Properties Ni-Ti Alloy after Electrochemical Testing in 0.9 % NaCl Solution. // Zaštita materijala - Materials Protection. 53 (2012) , 4; 345-351 (journal article).
|
14. Kršulja, Marko; Car, Zlatan; Radelja, Hrvoje.
Behaviour of X5 CrNiMo 17-12-2 Material During Deep Drawing Process. // METALURGIJA. 51 (2012) , 2; 203-206 (journal article).
|
15. Kršulja, Marko; Mijić, Saša; Barišić, Branimir; Car, Zlatan.
Design and Planning of Clamping Work-holder Station for Sheet Metal Part of Car Body. // Výrobné inžinierstvo, The journal Manufacturing and Industrial Engineering. 11 (2012) , 2; 38-43 (journal article).
|
16. Matijević, Božidar; Kumić, Ivan; Alar, Vesna.
Modification of the hot work tool steel surface by different thermochemical treatments. // International Heat Treatment and Surface Engineering. 6 (2012) , 1; 38-42 (journal article).
|
17. Matijević, Božidar; Kumić, Ivan; Belić, Tomislav.
THE LOW TEMPERATURE ALUMINIZING KINETIC OF HOT WORK TOOL STEELS. // HTM- Journal of Heat Treatment and Materials. 67 (2012) , 2; 133-139 (journal article).
|
18. Matijević, Božidar; Lj. Pedišić; Ljiljana.
THE INFLUENCE OF QUENCHANT COMPOSITION ON THE COOLING RATE. // HTM Journal of Heat Treatment and Materials. 67 (2012) , 2; 100-105 (journal article).
|
19. Matijević, Božidar; Župan, Josip; Pedišić, Ljiljana.
PROPERTIES OF DIFFERENT COMPOSITIONS OF OILS AS QUENCHANTS. // International Heat Treatment and Surface Engineering. 6 (2012) , 1; 15-18 (journal article).
|
20. Michel, J.; Buršák, M.; Mamuzić, I.
Degradation of mechanical properties of CrMo creep resistant steel operating under conditions of creep. // METALURGIJA. 51 (2012) , 1; 79-82 (preliminary note).
|
21. Pepelnjak, Tomaž; Magoč, Vladimir; Barišić, Branimir.
Analysis of Shear Hat Test in Digital Environment. // METALURGIJA. 51 (2012) , 2; 153-156 (journal article).
|
22. Plančak, Miroslav; Car, Zlatan; Kršulja, Marko; Vilotić, Dragiša; Kačmarcik, Igor; Movrin, Dejan.
Possibilities to Measure Contact Friction in Bulk Metal Forming. // Tehnicki Vjesnik-Technical Gazette. 19 (2012) , 4; 727-734 (journal article).
|
23. Plančak, Miroslav; Kacmarcik, Igor; Vilotić, Dragiša; Kršulja, Marko.
Compression of Bimetallic Components – Analytical and Experimental Investigation. // Annals of Faculty Engineering Hunedoara – International Journal of Engineering. X (2012) , 2; 157-160 (journal article).
|
24. Plančak, Miroslav; Movrin, Dejan; Vilotić, Dragiša; Car, Zlatan; Ivanišević, Aljoša; Kačmarcik, Igor.
An analysis of non-axisymmetric backward extrusion. // Tehnicki Vjesnik-Technical Gazette. 19 (2012) , 4; 953-957 (journal article).
|
25. Slokar, Ljerka; Matković, Tanja; Matković, Prosper.
Alloy design and property evaluation of new Ti-Cr-Nb alloys. // MATERIALS & DESIGN. 33 (2012) ; 26-30 (preliminary note).
|
26. Slokar, Ljerka; Matković, Tanja; Matković, Prosper.
Comparison of microstructural characteristics for biomedical Ti(70, 80 at.%)-Cr-Mo and Ti(70, 80 at.%)-Nb-Zr alloys. // Tehnički Glasnik. 6 (2012) , 2; 178-182 (journal article).
|
27. Stanić, Davor, Zovko Brodarac, Zdenka, Unkić, Faruk.
Development of support compressor prototype. // Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo. 54 (2012) , 1; 11-20 (preliminary note).
|
28. Šolić, Sanja; Cajner, Franjo; Leskovšek, Vojteh.
Effect of deep cryogenic treatment on mechanical and tribological properties of PM S390 MC high-speed steel. // Materials Testing. 2012/10 (2012) ; 688-693 (journal article).
|
29. Unkić, Faruk; Glavaš, Zoran; Veljačić, Emina.
THE INFLUENCE OF SILICON AND BORON ON TENSILE PROPERTIES OF DUCTILE IRON. // Livarski vestnik. 59 (2012.) , 2; 68-79 (journal article).
|
30. Zovko Brodarac, Zdenka; Grgurić Holjevac, Tamara; Unkić, Faruk; Terzić, Katarina.
Influence of microstructural characteristics on mechanical properties of AlSi11Cu2(Fe) alloy. // Livarski vestnik. 59 (2012) , 1; 15-30 (journal article).
|
31. Begić Hadžipašić, Anita; Malina, Jadranka; Nižnik, Štefan.
The influence of microstructure on hydrogen diffusion in dual phase steel. // Acta metallurgica Slovaca. 17 (2011) , 2; 129-137 (journal article).
|
32. Brovkin, Vladimir Leonidovich; Doroshenko, Tatyana Valerevna; Radchenko, Yuriy Nikolaevich; Lazić, Ladislav.
Chamber Design For Cooling The Rolled Steel Of Round Cross Section. // Металлургическая теплотехника. 18 (2011) , 3; 18-31 (journal article).
|
33. Bukhanovs’kyi, V. V.; Rudnyts’kyi, M. P.; Kharchenko, V. V.; Minakova, R. V.; Grechanyuk M. I.; Mamuzić, Ilija.
Relationship between composition, structure, and mechanical properties of a condensed composite of copper–tungsten system. // Strength of materials. 43 (2011) , 4; 426-432 (journal article).
|
34. Ćurčija, D.; Vodopivec, F.; Mamuzić, Ilija.
Similarity criteria and effect of lubricant inertia at cold rolling. // Materiali in tehnologije. 45 (2011) , 1; 75-80 (journal article).
|
35. Dolić, Natalija; Malina, Jadranka; Begić Hadžipašić, Anita.
Pit nucleation on as-cast aluminiuim alloy AW-5083 in 0.01M NaCl. // Journal of mining and metallurgy. Section: B, Metallurgy. 47 (2011) , 1; 79-87 (journal article).
|
36. Dolić, Natalija; Mrvar, Primož; Medved, Jožef; Unkić, Faruk.
NUMERICAL SIMULATION OF SOLIDIFICATION AND MICROSTRUCTURE DEVELOPMENT OF SEMICONTINUOUS CAST SLAB OF ALUMINIUM ALLOY EN AW-5083. // Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo. 53 (2011) , 2; 31-37 (journal article).
|
37. Gojić, Mirko; Lazić, Ladislav; Kožuh, Stjepan; Kosec, Ladislav.
The effect of defects on tensile strength of the continuous steel casting products. // RMZ - Materials and geoenvironment. 58 (2011) , 3; 241-252 (journal article).
|
38. Grozdanić, Vladimir.
Modelling of the directional solidification of a leaded red brass flange. // Materiali in tehnologije. 45 (2011) , 1; 47-53 (journal article).
|
39. Grubišić, Željko; Lazić, Ladislav; Črnko, Josip.
The Ability to Increase the Furnace Energy Efficiency by Increasing the Temperature of Preheated Air. // Acta Metallurgica Slovaca Conference. 2 (2011) , 1; 35-41 (journal article).
|
40. Gulyayev, YU. G.; Mamuzić, Ilija; Shyfrin, YE. I.; Buršak, M.; Garmashev, D. YU.
Perfection of processes of seamless steel tubes production. // Metalurgija. 50 (2011) , 4; 285-288 (review article).
|
41. Horbaj, Peter; Selin, Jozef; Kvočak, Vincent; Hršak, Damir.
Burning of fossil fuels - one of the sources harmful emissions. // Energetika. 61 (2011) , 11; 627-629 (review article).
|
42. Horsinka, J.; Kliber, J.; Drozd, K.; Mamuzić, Ilija.
Approximation model of the stress-strain curve for deformation of aluminium alloys. // Metalurgija. 50 (2011) , 2; 81-84 (journal article).
|
43. Kormaníková, E.; Mamuzić, Ilija.
Optimization of laminates subjected to failure criterion. // Metalurgija. 50 (2011) , 1; 41-44 (preliminary note).
|
44. Kormaníková, E.; Mamuzić, Ilija.
Shear deformation laminate theory used for sandwiches. // Metalurgija. 50 (2011) , 3; 193-196 (preliminary note).
|
45. Lazanja, Matej; Barišić, Branimir; Car, Zlatan; Plančak, Miroslav.
Accuracy Inspection of a Milling Machine with Ballbar System. // Journal ''CA Systems in production process Planning''. 12 (2011) , 1; 79-82 (journal article).
|
46. Lazić, Ladislav; Brovkin, Vladimir; Varga Augustin; Kizek, Jan.
Implementing a New Combustion Technology on the Rotary Hearth Furnace. // Acta Metallurgica Slovaca Conference. 2 (2011) , 1; 118-125 (journal article).
|
47. Lazić, Ladislav; Grubišić, Željko.
Reduction of Energy Consumption in the Foundry Industry through Increase of Combustion Efficiency. // Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo. 53 (2011) , 1; 17-22 (review article).
|
48. Lazić, Ladislav; Lukač, Ladislav; Lukač Petar; Hršak, Damir.
Influence of the External Recirculation of Flue Gases on Reduction of NOx at Propane-Butane Combustion. // International Scientific Publications: Ecology & Safety. 5 (2011) , 2; 4-16 (journal article).
|
49. Malina Jadranka; Dolić Natalija; Markotić Ante.
CORROSION RESISTANCE OF ALUMINUM ALLOYS EN AW-5083 AND EN AC-44200 IN AS-CAST CONDITIONS. // Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo. 53 (2011) , 1; 9-15 (preliminary note).
|
50. Matković, Romeo; Kršulja, Marko; Barišić, Branimir; Plančak, Miroslav.
CMM Measurement and Measurement Quality Plan for Dimension Control. // Journal ''CA Systems in production process Planning''. 12 (2011) , 1; 87-90 (journal article).
|
51. Netinger, Ivanka; Bjegović, Dubravka; Varevac, Damir; Morić, Dragan.
Use of slag from steel industry as concrete aggregate. // Građevinar : časopis Hrvatskog saveza građevinskih inženjera. 63 (2011) , 2; 169-175 (journal article).
|
52. Plančak, Miroslav; Barišić, Branimir; Vilotić, Dragiša; Kacmarcik, Igor; Movrin, Dejan; Skakun, Plavka; Milutinović, Maladimir.
Analytical and Numerical Solutions for Friction Calibration Curves (FCC) in Bulk Metal Forming. // Journal ''CA Systems in production process Planning''. 12 (2011) , 1; 107-110 (journal article).
|
53. Plančak, Miroslav; Car, Zlatan; Vilotić, Dragiša; Movrin, Dejan; Kršulja, Marko.
Upsetting of Bimetallic Components in Closed Die. // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici. 31 (2011) , 2; 105-109 (journal article).
|
54. Radchenko, Yu. N.; Brovkin, L. Vladimir, Reshetnyak, S. I.; Lazić, Ladislav; Varga, Augustin; Kizek, Jan.
Analysis of Heat Exchange in Regenerators of Steel-Smelting Furnace. // Acta Metallurgica Slovaca Conference. 2 (2011) , 1; 176-183 (journal article).
|
55. Rađenović, Ankica; Malina, Jadranka; Štrkalj, Anita.
REMOVAL OF Ni (II) FROM AQUEOUS SOLUTION BY LOW-COST ADSORBENTS. // The Holistic Approach to Environment. 3 (2011) , 1; 109-120 (review article).
|
56. Sofilić, Tahir; Barišić, Delko; Sofilić, Una; Đuroković, Marija.
Radioactivity of some building and raw materials used in Croatia. // Polish Journal of Chemical Technology. 13 (2011) , 3; 23-27 (journal article).
|
57. Sofilić, Tahir; Ćosić, Mario; Mladenovič, Ana; Asi, Ibrahim; Sofilić, Una.
Electric Arc Furnace Slag Instead Natural Mineral Aggregate In Asphalt Wearing Course. // Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo. 53 (2011) , 3-4; 71-76 (journal article).
|
58. Stanković, Igor; Car, Zlatan, Barišić, Branimir.
Comparative simulations of the heavy machining production system. // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici. 31 (2011) , 1; 1-11 (journal article).
|
59. Vaszi, Zsolt; Švab, Julius; Varga, Augustin; Jablonsky, Gustav; Kizek, Jan; Lazić, Ladislav.
Mathematical and Physical Model of the Mixers of Air/Fuel and Oxygen Enriched Air/Fuel Burner. // The Holistic Approach to Environment. 1 (2011) , 3; 87-96 (journal article).
|
60. Vaszi, Zsolt; Švab, Julius; Varga, Augustin; Lazić, Ladislav.
CFD Modelling of the Oxy-Burner Mixers. // Acta Metallurgica Slovaca Conference. 2 (2011) , 1; 227-234 (journal article).
|
61. Višekruna, Antonija; Štrkalj, Anita; Marinić Pajc, Ljiljana.
THE USE OF LOW COST ADSORBENTS FOR PURIFICATION WASTEWATER. // The Holistic Approach to Environment. 1 (2011) , 1; 29-37 (journal article).
|
62. Zeljko, Snježana; Glavaš, Zoran; Terzić, Katarina; Unkić, Faruk.
Microstructural stability of gray iron thin section castings for enameling. // RMZ - Materials and geoenvironment. 58 (2011.) , 2; 101-111 (journal article).
|
63. Zovko Brodarac, Zdenka; Unkić, Faruk; Terzić, Katarina.
Influence of the melt treatment on the microstructure and mechanical properties development of the AlSi10Mg alloy. // Livarski vestnik. 58 (2011) , 1; 2-21 (journal article).
|
64. Barišić, Branimir; Cukor, Goran; Radošević, Marko.
Hardness Measurement by Means of PCE 2000 Hardness Tester Using Leeb Method. // Výrobné inžinierstvo. IX (2010) , 3; 77-80 (journal article).
|
65. Barišić, Branimir; Mamuzić, Ilija; Nastran, Miha.
Improvement of sheet metal forming technology by aplicationof different software aproaches. // Transactions of FAMENA. 34 (2010) , 1; 29-38 (journal article).
|
66. Barišić, Ivana; Dimter, Sanja; Netinger, Ivanka.
Possibilities of application of slag in road construction. // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku. 17 (2010) , 4; 523-528 (review article).
|
67. Brovkin, V. L.; Anurova, T.V.; Radchenko, Ju. N.; Kovalenko, V.V.; Lazić, Ladislav.
Analysis of accelerated cooling of steel rolled products in existing technologies and its influence on the structure and mechanical properties. // Metallurgicheskaya teplotehnika. 17 (2010) , 2; 14-22 (journal article).
|
68. Bukhanovsky, V. V.; Rudnitsky, N. P.; Charchenko, N. P.; Mamuzić, Ilija.
Dependence between Hardness and Strength Characteristics of Cu-Cr Micro-Ply Composite at High Temeratures. // Problemy pročnosti. 42 (2010) , 2; 80-92 (journal article).
|
69. Chygyryns’kyy, Valeryy Victorovich; Shevchenko, Vladimir Grigorovich; Mamuzić, Ilija; Belikov, Sergey Borisevich.
A new solution of the harmonic functions in theory of elasticity. // Materiali in tehnologije. 44 (2010) , 4; 219-222 (journal article).
|
70. Chygyrynskyy, V. V.; Kachan, A. Ya.; Mamuzić, Ilija; Ben, A. N.
Generalized theory of plasticity. // Materiali in tehnologije. 44 (2010) , 3; 141-145 (journal article).
|
71. Dobatkin, S.; Zrnik, J.; Mamuzić, Ilija.
Development of SPD continuous processes for strip and rod production. // Metalurgija. 49 (2010) , 4; 343-347 (review article).
|
72. Gojić, Mirko; Kožuh, Stjepan; Kosec, Borut.
SEM and EDX analysis of continuous casting of steel. // Acta Metallurgica Slovaca - Conference. 16 (2010) , 1; 235-237 (journal article).
|
73. Gulyayev, YU. G.; Shyfrin, YE. I.; Mamuzić, Ilija; Garmashev, D. YU.; Maximova, N. A.
The modern trends of development of the pipe and tube industry. // Metalurgija. 49 (2010) , 3; 187-190 (review article).
|
74. Jablonski, G.; Varga, Augustin; Kizek, Jan; Lazić, Ladislav.
The Proposal of the Oxy-burner. // ERIN (Education, Research, Innovation). 3 (2010) ; 12-17 (journal article).
|
75. Jelić, Predrag; Lazić, Ladislav; Črnko, Josip.
The Effect of Cooling Rate on the Properties of Alloyed Cast-Iron Sizing Roll. // Metalurgija. 49 (2010) , 1; 45-48 (preliminary note).
|
76. Kliber, J.; Mamuzić, Ilija.
Selected new technologies and research themes in materials forming. // Metalurgija. 49 (2010) , 3; 169-174 (review article).
|
77. Krstić Vukelja, Elizabeta; Duplančić, Igor; Lela, Branimir.
Continuous roll casting of aluminium alloys– casting parameters analysis. // Metalurgija. 49 (2010) , 2; 115-118 (preliminary note).
|
78. Kršulja, Marko; Barišić, Branimir; Plančak, Miroslav; Čep, Robert.
Investigation Of Alluminium Alloy Composition AlSi9Cu3 Alloy In Foundury Process. // Technologické inžinierstvo - Technological Engineering. 7 (2010) , 2; 53-56 (journal article).
|
79. Kuric, Ivan; Barišić, Branimir.
Trends of Computer Support in Pre-Production Stage. // Scientific Bulletin Series C. 14 (2010) ; 43-48 (journal article).
|
80. Lojen, Gorazd; Kneissl, Albert C.; Gojić, Mirko; Rudolf, Rebeka; Čolić, Miodrag; Anžel, Ivan.
Continuous Casting of Cu-Al-Ni Shape Memory Alloys. // Livarski vestnik. 57 (2010) , 4; 172-193 (journal article).
|
81. Malina, Jadranka; Begić Hadžipašić, Anita; Zovko Brodarac, Zdenka; Unkić, Faruk.
Microstructural Characteristics of Nodular Iron after Charging with Hydrogen. // Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo. 52 (2010) , 1; 3-8 (journal article).
|
82. Malina, Jadranka; Zeljko, Snježana; Begić Hadžipašić, Anita; Unkić, Faruk; Nižnik, Štefan.
Investigation of chromium addition on microstructure of gray cast iron for enameling. // Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo. 52 (2010) , 3-4; 59-67 (preliminary note).
|
83. Martišković, Josip; Glavaš, Zoran; Babić, Anita.
Optimization of metal charge in production process of ductile iron. // Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo. 52 (2010) , 2; 31-37 (journal article).
|
84. Matković, Tanja; Slokar, Ljerka; Matković, Prosper.
Effect of composition on the structure and properties of Ti-Co-Cr alloys. // Metalurgija. 49 (2010) , 1; 33-36 (journal article).
|
85. Matysiak, Waldemar; Barišić, Branimir; Mamuzić, Ilija.
Elaboration of The Technology of Forming a Conical Product of Sheet Metal. // Metalurgija. 49 (2010) , 1; 13-18 (journal article).
|
86. Matysiak, W.; Barišić, B.; Mamuzić, Ilija.
Elaboration of the technology of forming a conical product of sheet metal. // Metalurgija. 49 (2010) , 1; 13-17 (journal article).
|
87. Minakova, R. V.; Grechanyuk, I. N.; Bukhanovsky, V.V.; Rudnitsky, N. P.; Mamuzić, Ilija.
Structure, electrical conductivity and mechanical characteristics of copper - tungsten composite obtained by electron beam physical vapour deposition (EB - PVD) technique. // Transactions of FAMENA. 34 (2010) , 2; 37-46 (journal article).
|
88. Netinger, Ivanka; Jelčić Rukavina, Marija; Bjegović, Dubravka.
Possibility of using domestic slag as concrete aggregate. // Građevinar : časopis Hrvatskog saveza građevinskih inženjera. 62 (2010) ; 35-43 (preliminary note).
|
89. Plančak, Miroslav; Kuzman, Karl; Barišić, Branimir; Vilotić, Dragiša; Čupković, Djordje.
Analysis of the Double Backward Extrusion Process. // Cercetări metalurgice şi de noi materiale. VIII (2010) , 2; 15-21 (journal article).
|
90. Rešković, Stoja; Križanić, Rade; Vodopivec, Franc.
Numerical Design of a Hot-stretch-reducing Process for Welded Tubes. // Materiali in tehnologije. 44 (2010.) , 5; 243-250 (journal article).
|
91. Štrkalj, Anita; Rađenović, Ankica; Malina, Jadranka.
Adsorption of Ni (II) ions from aqueous solution on anode dust: Effect of pH value. // RMZ - Materials and geoenvironment. 57 (2010) , 2; 165-172 (journal article).
|
92. Štrkalj, Anita; Rađenović, Ankica; Malina, Jadranka.
Nickel adsorption onto carbon anode dust modified by acetic acid and KOH. // Journal of mining and metallurgy. Section: B, Metallurgy. 46 (2010) , 1; 33-40 (journal article).
|
93. Ungureanu, Nicolae; Ungureanu, Miorita; Cotetiu, Adriana; Barišić, Branimir; Grozav, Sorin.
Principles of the Maintenance Management. // Scientific Bulletin Series C. 14 (2010) , 1; 69-72 (journal article).
|
94. Zovko Brodarac, Zdenka; Šašo, Božidar; Terzić, Katarina; Unkić, Faruk.
Examination of the properties consistency of the charge material grade EN AB AlSi12Fe(Cu). // Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo. 52 (2010) , 1; 9-16 (preliminary note).
|
95. Božidar Matijević; Stupnišek, Mladen.
Novelty in Diffusion Coating Technology. // Materials and Manufacturing Processes. 24 (2009) , 7-8; 887-893 (journal article).
|
96. Brovkin, V. L.; Gubinskiy, V. L.; Radchenko, Yu. N.; Kovalenko, V. V.; Makhnev, M. I.; Zinchenko, S. A.; Korostelev, V. G.; Lazić, Ladislav.
Influence of Cooling of Rolled Products During the Rolling Process on their Mechanical Properties. // Acta Metallurgica Slovaca. 15 (2009) , 1; 44-51 (journal article).
|
97. Čurćija, Dušan; Mamuzić, Ilija.
Estimation of lubricant layer on pipe rolling in mills. // Goriva i maziva. 48 (2009) , 1; 3-15 (journal article).
|
98. Ćurčija, Dušan; Mamuzić, Ilija.
Schemes of metal-working processes and the related tribological equations of fluid mechanics. // Materiali in tehnologije. 43 (2009) , 1; 23-30 (journal article).
|
99. Dobatkin, S.; Zrnik, J.; Mamuzić, Ilija.
Mechanical and service properties of low carbon steels processed by severe plastic deformation. // Metalurgija. 48 (2009) , 3; 157-160 (journal article).
|
100. Dragutin Lisjak; Božidar Matijević.
Determination of Steel Carburizing Parameters by Using Neural Network. // Materials and Manufacturing Processes. 24 (2009) , 7-8; 772-788 (journal article).
|
101. Gigović-Gekić, A.; Oruč, M.; Vitez, Ivan; Vujičić, B.
Analyse and research of nonmetallic inclusions for steel 100Cr6. // Metalurgija. 48 (2009) , 1; 29-32 (preliminary note).
|
102. Glavaš, Zoran; Unkić, Faruk; Martišković, Josip.
Preconditioning and metallurgical quality of gray cast irons melts. // Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo. 51 (2009) , 2; 47-56 (review article).
|
103. Gojić, Mirko; Marijan, Dražen; Kožuh, Stjepan; Sorić, Tomislav.
Behaviour of AISI 316L Steel Exposed to Demineralized Water. // Kemija u industriji. 58 (2009) , 6; 253-259 (journal article).
|
104. Grozdanić, Vladimir.
Finite-difference methods for simulating the solidification of castings. // Materiali in tehnologije. 43 (2009) , 5; 233-237 (review article).
|
105. Gulyayev, Yu. G.; Shyfrin, Ye. I.; Mamuzić, Ilija.
A mathematical model for the stationary process of rolling of tubes on a continuous mill. // Materiali in tehnologije. 43 (2009) , 2; 63-67 (journal article).
|
106. K.Miloš, H.danninger, G.Jangg, H.-P.Degisher.
Mechanical properties and dry sliding wear behaviour of extruded Al-Al2O3 PM composites. // Powder metallurgy progress. 9 (2009) , 4; 191-204 (journal article).
|
107. Kršulja, Marko; Štefančić, Mauro; Barišić, Branimir.
Forming Processes in Manufacture of An Access Cover and Control of Position Tolerances. // Výrobné inžinierstvo. VIII (2009) , 3; 33-39 (journal article).
|
108. Kundak, Mijo; Lazić, Ladislav; Črnko, Josip.
CO2 emissions in the steel industry. // Metalurgija. 48 (2009) , 3; 193-197 (review article).
|
109. Lazić, Ladislav; Brovkin, Vladimir; Varga, Augustin; Kizek, Jan.
Hot Rolling Mills Opportunities of Carbon Dioxide Emissions Reduction. // Acta Metallurgica Slovaca. 15 (2009) , 1; 159-167 (journal article).
|
110. Malina, Jadranka; Malina, Marijan; Vručinić, Goran.
Resistance of TMCP steel welded joints against hydrogen embrittlement. // Zavarivanje. 52 (2009) , 3/4; 81-86 (preliminary note).
|
111. Matijević, Božidar; Stupnišek, Mladen.
Prevention of Reactive Soldering on Die Casting Parts. // JOURNAL OF THE JAPAN SOCIETY FOR HEAT TREATMENT. 1 (2009) ; 381-384 (journal article).
|
112. Matijević, Božidar; Stupnišek, Mladen.
PREVENTION OF REACTIVE SOLDERING ON DIE CASTING PARTS. // Transactions of FAMENA. 33 (2009) , 3; 35-42 (journal article).
|
113. Mikolaj, D.; Lazić, Ladislav; Kizek, J.
Flowmeter Based on Heat Transfer Fundamentals. // Tehnična teplofizika ta promislova teploenergetika. 1 (2009) , 1; 215-222 (journal article).
|
114. Plančak, Miroslav; Kuzman, Karl; Barišić, Branimir; Vilotić, Dragiša; Lužanin, Ognjan.
Non - Homogeneity of Wall Thickness In Tube Hydroforming. // Cercetări metalurgice şi de noi materiale. XVII (2009) , 4; 1-8 (journal article).
|
115. Rađenović, Ankica.
Sulphur Separation by Heat Treatment of Petroleum Coke. // Nafta. 60 (2009) , 3; 171-175 (journal article).
|
116. Rađenović, Ankica; Malina, Jadranka; Matijašić, Gordana.
The Change in Surface Area Properties of Blast Furnace Sludge Treated by Acetic Acid. // Kemija u industriji. 58 (2009) , 4; 159-163 (journal article).
|
117. Rađenović, Ankica; Malina, Jadranka; Štrkalj, Anita.
Adsorption Isotherm of Waste Mould Sand ─ Cr(VI) Ions System. // Ljevarstvo : glasilo Hrvatskog udru� enja za ljevarstvo. 51 (2009) , 2; 41-45 (journal article).
|
118. Rađenović, Ankica; Štrkalj, Anita; Malina, Jadranka.
Properties of the chemically activated carbon anode dust. // Engineering review : znanstveni Časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici. 29 (2009) ; 13-20 (journal article).
|
119. Rešković, Stoja; Glavaš, Zoran.
The Application of an Artificial Neural Network for Determining the Influence of the Parameters for the Deposition of a Zinc Coating on Steel Tubes. // Materiali in tehnologije. 43 (2009.) , 4; 201-205 (journal article).
|
120. Shramko, Aleksandr; Mamuzić, Ilija; Danchenko, Valentin.
The application of the program Qform 2D in the stamping of wheels for railway vehicles. // Materiali in tehnologije. 43 (2009) , 4; 207-211 (journal article).
|
121. Stanić, Davor; Zovko Brodarac, Zdenka; Unkić, Faruk.
Microstructural and mechanical properties of the AlSi7Mg alloy samples cast in permanent mould. // Ljevarstvo. 51 (2009) , 3; 65-72 (preliminary note).
|
122. Sučik, Gabriel; Hreus, Martin; Fedoročkova, Alena; Hršak, Damir.
Dehydroxylation of the serpentinite before its chemical treatment. // Acta Montanistica Slovaca. 14 (2009.) , 1; 33-37 (journal article).
|
123. Štrkalj, Anita; Malina, Jadranka; Rađenović, Ankica.
Waste mould sand-potential low-cost sorbent for nickel and chromium ions from aqueous solution. // RMZ - Materials and geoenvironment. 56 (2009) , 2; 118-125 (journal article).
|
124. Unkić, Faruk; Glavaš, Zoran; Terzić, Katarina.
The influence of elevated temperatures on microstructure of cast irons for automotive engine thermo-mechanical loaded parts. // RMZ - Materials and geoenvironment. 56 (2009) , 1; 9-23 (journal article).
|
125. Varga, Augustin; Tatič, Miroslav; Lazić, Ladislav.
Application of roof radiant burners in large pusher-type furnaces. // Metalurgija. 48 (2009) , 3; 203-207 (review article).
|
126. Varga, Augustin; Tatič, Miroslav; Lazić, Ladislav.
Primary Scale Formation During Silica Steel Slabs Heating in Push Furnaces. // Acta Metallurgica Slovaca. 15 (2009) , 1; 345-351 (journal article).
|
127. Zovko Brodarac, Zdenka; Mrvar, Primož; Unkić, Faruk; Medved, Jožef.
Influence of the Cooling Rate on the Microstructure Development of the AlMg9 alloy. // Livarski vestnik. 56 (2009) , 3; 130-148 (journal article).
|
128. Zrnik, J.; Vitez, Ivan; Kovarik, T., Cieslar, M.
Forming of ultrafine grained structure in aluminium by CGP method. // Metalurgija. 48 (2009) , 1; 15-18.
|
129. Žic, Samir; Džambas, Igor; Ikonić, Milan.
Possibilities of implementing bimetallic hammer castings in crushing industries. // Metalurgija. 48 (2009) , 1; 51-54 (journal article).
|
130. Babić, Stjepan; Unkić, Faruk.
An influence of the second phase rate of the high pressure die casting on the casting strength. // Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo. 50 (2008) , 3; 81-88 (preliminary note).
|
131. Barišić, Branimir; Car, Zlatan; Ikonić, Milan.
Analysis of Different Modeling Approach at Determining of Backward Extrusion Force on AlCu5PbBi Material. // Journal Metallurgy. 47 (2008) , 4; 307-311 (journal article).
|
132. Barišić, Branimir; Grizelj, Branko; Plancak, Miroslav.
Modeling Approach for Determination of Backward Extrusion Strain Energy on AlCu5PbBi. // Key Engineering Materials. 367 (2008) ; 221-230.
|
133. Barišić, Branimir; Rucki, Miroslaw; Car, Zlatan.
Analysis of Digitizing and Traditional Measuring System at Surface Measurement of Lids. // Key Engineering Materials. 381-382 (2008) ; 217-221.
|
134. Blažević, Dalibor; Ikonić, Milan; Mikac, Tonči.
Algorithm for Prevention of Molten Steel Sticking onto Mold in Continous Casting Process. // Metalurgija. 47 (2008) , 1; 47-50 (journal article).
|
135. Bukhanovskii, V. V.; Mamuzić, Ilija.
The influence of high-temperature gaseous medium on the structure and mechanical characteristic of niobium alloy 10VMTs. // Problems of strengths. 3 (2008) ; 26-32 (journal article).
|
136. Buršák, M.; Mamuzić, Ilija; Michel’ , J.
Contribution to evaluation of mechanical properties during impact loading. // Metalurgija. 47 (2008) , 1; 19-23 (journal article).
|
137. Ćurčija, Dušan; Mamuzić, Ilija.
Lubrication flow during the rolling of seamless tubes. // Materiali in tehnologije. 42 (2008) , 2; 59-63 (journal article).
|
138. Dobatkin, S.; Zrnik, J.; Mamuzić, Ilija.
Ultrafine-grained low carbon steels by severe plastic deformation. // Metalurgija. 47 (2008) , 3; 181-186 (journal article).
|
139. Glavaš, Zoran; Terzić, Katarina; Unkić, Faruk.
Influence of microstructure on impact toughness of nodular cast iron. // Ljevarstvo. 50 (2008.) , 4; 91-97 (journal article).
|
140. Glavaš, Zoran; Unkić, Faruk; Lisjak, Dragutin.
The Prediction of the As-Cast Ductile Iron Impact Toughness by Using Thermal Analysis and Artificial Neural Networks. // Livarski vestnik. 55 (2008) , 2; 62-81 (journal article).
|
141. Gojić, Mirko; Marijan, Dražen; Tudja, Marijan; Kožuh, Stjepan.
Passivation of welded AISI 316L stainless steel. // RMZ-Materials and Geoenvironment. 55 (2008) , 4; 408-419 (journal article).
|
142. Grechaniuk, N. I.; Mamuzić, Ilija; Minakova, R. V.
Peculiarities of the structure, its deformation and destruction of condensed Cu-Mo-Zr-Y composite material of commercial purity. // Metalurgija. 47 (2008) , 2; 99-102 (journal article).
|
143. Grizelj, Branko; Plančak, Miroslav; Barišić, Branimir.
Numerical Simulation of Combined Forward-Backward Extrusion. // Key Engineering Materials. 367 (2008) ; 193-201.
|
144. Hršak, Damir; Sučik, Gabriel; Lazić, Ladislav.
The Thermophysical Properties of Serpentinite. // Metalurgija. 47 (2008) , 1; 29-31 (journal article).
|
145. Kormaníková, E.; Mamuzić, Ilija.
Buckling analysis of a laminate plate. // Metalurgija. 47 (2008) , 2; 129-132 (journal article).
|
146. Kvačkaj, T.; Molnárová, M.; Mamuzić, Ilija; Bacsó, J.; Mišičko, R.; Fujda, M.; Škodronová, P.; Kuskulič, T.; Pokorný, I.
Influence of reheating and cooling conditions on structure and mechanical properties of C-Mn-Si steel. // Metalurgija. 47 (2008) , 3; 187-190 (journal article).
|
147. Ljiljana, Pedisić; Božidar, Matijević; Jasminka, Munić.
EFFECTS OF CONCENTRATION WATERMISCIBLE METALWORKING FLUIDS ON COOLING RATE. // Goriva i maziva. 6 (2008) ; 450-462 (journal article).
|
148. Mamuzić, Ilija.
The Fiftyfifth Anniversary of the Foundation of Croatian Metallurgical Society (CMS) 1952 – 2007. // Metalurgija. 47 (2008) , 3; 147-171 (review article).
|
149. Marušić, Vlatko; Vitez, Ivan; Nedić, Bogdan.
Abrasive wear resistance of glass fiber reinforced polyester laminates. // Metalurgija. 47 (2008) , 4; 351-355 (preliminary note).
|
150. Plancak, Miroslav; Barišić, Branimir; Grizelj, Branko.
Different Possibilities of Process Analysis in Cold Extrusion. // Key Engineering Materials. 367 (2008) ; 209-215.
|
151. Rađenović, Ankica; Malina, Jadranka.
Possibility of Ni+2 ions removal from aqueous solution by carbon black. // Nafta. 59 (2008) , 3; 121-125 (journal article).
|
152. Rađenović, Ankica; Malina, Jadranka.
Efficiency of the nickel removal from aqueous solutions by chemically treated carbon black. // Polimeri. 29 (2008) , 3; 157-160 (journal article).
|
153. Rastovčan-Mioč, Alenka; Ćurković, Lidija; Perković, Stojanka.
ELUTION OF FOUNDRY SAND AND MOULD MIXTURE IN WATER. // MP Materialprüfung Materials Testing. 6 (2008) ; 332-335 (journal article).
|
154. Rešković, Stoja; Vodopivec, Franc.
An investigation of the stretch reducingof welded tubes. // Materiali in tehnologije. 42 (2008) , 6; 257-262 (journal article).
|
155. Rudnitsky, N. P.; Mamuzić, Ilija.
Strength of anisotropic nickel-mesh composite materials. // Metalurgija. 47 (2008) , 1; 57-59 (preliminary note).
|
156. Šimunović, Katica; Franz, Mladen; Marić, Gojko.
Investigation and Estimation of Residual Stress in Flame Sprayed and Fused NiCrBSi Coatings. // Metalurgija. 47 (2008) , 2; 93-97 (journal article).
|
157. Vodopivec, F.; Arzenšek, B.; Vojvodič Tuma, J.; Celin, R.
The Charpy fracturing process in ductile range. // Metalurgija. 47 (2008) , 3; 173-179 (journal article).
|
158. Zovko Brodarac, Zdenka; Dekanić, Branislava; Terzić, Katarina; Kalauz, Vinko; Unkić, Faruk.
Solidification and Microstructural Characteristics of the AlSi10Mg alloy. // Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo. 50 (2008) , 3; 71-80 (journal article).
|
159. Zrnik, J.; Dobatkin, S. V.; Mamuzić, Ilija.
Processing of metals by severe plastic deformation (SPD) – structure and mechanical properties respond. // Metalurgija. 47 (2008) , 3; 211-216 (review article).
|
160. Buchanovsky, V. V.; Mamuzić, Ilija; Polishuk, E. P.
The Effect of Heat Treatment on Mechanical Characteristics and Nature of Failure of Sheet Molybdenum Alloys. // Metalurgija = Metallurgy. 46 (2007) , 4; 233-236 (journal article).
|
161. Bukhanovskii, V. V.; Kharchenko, V. K.; Mamuzić, Ilija.
Heat-Resistance Characteristics of VM-1 Low-Alloyed Molybdenum Alloy. // Problemy pročnosti. 388 (2007) , 4; 90-98 (journal article).
|
162. Buršak, Marian; Mamuzić, Ilija; Michel', J.
New Approach to Evaluation of Formability of Higher-Strength Steel Strips. // Metalurgija = Metallurgy. 46 (2007) , 1; 37-40 (preliminary note).
|
163. Buršák, M.; Mamuzić, Ilija.
Fatigue Properties of Galvanized Higher-Strength Steel Sheets. // Metalurgija. 46 (2007) , 4; 277-280 (journal article).
|
164. Ćurčija, Dušan; Mamuzić, Ilija.
Theoretical calculation of the lubrication-layer thickness during metal drawing. // Materiali in Tehnologije = Materials and Technology. 41 (2007) , 1; 21-27 (review article).
|
165. Ćurčija, Dušan; Mamuzić, Ilija.
Lubricating film formation for strip dressing. // Goriva i maziva. 46 (2007) , 1; 34-44 (journal article).
|
166. Devčić, N.; Mamuzić, Ilija.
Trends of Modernization of Pilger Equipment. // Metalurgija = Metallurgy. 46 (2007) , 3; 205-209 (review article).
|
167. Gojić, Mirko; Kosec, Borut; Anžel, Ivan; Kosec, Ladislav; Preloščan, Andrija.
Hardenability of steels for oil industry. // Journal of Achievements in Materials and Manufacturing Engineering. 23 (2007) , 2; 23-26 (journal article).
|
168. Gojić, Mirko; Kožuh, Stjepan; Kosec, Ladislav; Tehovnik, Franc.
Microstructural and fractographic analysis of stainless steel 316L before and after welding. // Acta Metallurgica Slovaca. 13 (2007) , 1; 318-322 (journal article).
|
169. Grechanyuk, N. I.; Mamuzić, Ilija; Bukhanovsky, V. V.
Production Technology, Physical, Mechanical and Performance Characteristics of Cu-Zr-Y-Mo Finely-Dispersed Microlayer Composite Materials. // Metalurgija = Metallurgy. 46 (2007) , 2; 93-96 (journal article).
|
170. Ikonić, Milan; Barišić, Branimir; Blažević, Dalibor.
Identification and quantification of raw materials during designing of cast production process. // Metalurgija. 46 (2007) , 3; 179-184 (review article).
|
171. Ikonić, Milan; Mikac, Tonči; Perinić, Mladen.
Planning of Material Consumption in Serial Production of the Castings. // Metalurgija. 46 (2007) , 2; 101-106 (preliminary note).
|
172. Kladarić, Ivica; Krumes, Dragomir; Vitez, Ivan.
The Influence of Retained Austenite on Precipitation Hardening of Maraging Steel. // Metalurgija = Metallurgy. 46 (2007) , 2; 97-99 (journal article).
|
173. Kožuh, Stjepan; Gojić, Mirko; Kosec, Ladislav.
The effect of annealing on properties of AISI 316L base and weld metals. // RMZ-Materials and Geoenvironment. 54 (2007) , 3; 331-344 (journal article).
|
174. Krivenyuk, V.; Mamuzić, Ilija.
Correlation of Creep-Rupture Data for Complex Alloys at Elevated Temperatures. // Metalurgija. 46 (2007) , 2; 79-85 (journal article).
|
175. Lazić, Ladislav; Brovkin, Vladimir Leonidovič; Svinolobov, Nikolaj Petrovič.
CHOICE OF THE APPROPRIATE HEIGHT OF FLAME FURNACE WITH THE ROOF INDIRECT HEATING. // Acta Metallurgica Slovaca. 13 (2007) , 3; 202-208 (journal article).
|
176. Lazić, Ladislav; Jelić, Predrag; Črnko, Josip; Brovkin, Vladimir.
Fuel Economy through Improving the Furnace Temperature Regime. // Acta Mechanica Slovaca. 11 (2007) , 4-D; 103-107 (journal article).
|
177. Malina, Jadranka; Vručinić, Goran; Malina, Marijan.
Evaluation of Welded TMCP Steel for Resistance to HIC and SSC. // Welding in the World. 51 (2007) , Special Issue - 2007; 537-546 (journal article).
|
178. Mamuzić, Ilija; Trebuňa, F.; Buršák, M.; Tomčík, J.
Investigation of Reasons and Possibility of Parameters Elimination Influencing Cracking of Leaf Springs on Continuous Casting Machine. // Metalurgija. 46 (2007) , 4; 267-271 (preliminary note).
|
179. Rađenović, Ankica.
Properties of heat treated green petroleum coke. // Nafta. 58 (2007) , 7-8; 381-384 (journal article).
|
180. Rađenović, Ankica.
Structural properties of petroleum coke. // Nafta. 58 (2007) , 10; 500-506 (review article).
|
181. Stepanov, G.; Mamuzić, Ilija; Babutsky, A.
An Increase of Impact Toughness of Low-Carbon Steel Caused by Impulse Electric Current Treatment. // Metalurgija. 46 (2007) , 4; 251-253 (journal article).
|
182. Unkić, Faruk; Glavaš, Zoran; Živčić, Miroslav.
Properties of Cr-Mo and Cr-Mo-V steel castings for elevated temperature service. // Livarski vestnik. 54 (2007) , 3; 131-143 (journal article).
|
183. Vitez, Ivan; Oruč, M.; Krumes, Dragomir; Kladarić, Ivica.
Damage to railway rails caused by exploitation. // Metalurgija = Metallurgy. 46 (2007) , 2; 123-128 (review article).
|
184. Wencel, Z.; Budzik, R.; Križanić, Rade; Kolmasiak, C.
The Synergy of the Surface Layer after Carburizing of Tool Steel as a Measure of Operational Quality. // Metalurgija = Metallurgy. 46 (2007) , 4; 255-260 (journal article).
|
185. Zovko Brodarac, Zdenka; Mrvar, Primož; Medved, Jožef; Fajfar, Peter.
Local Squeezing Casting Influence on the Compactness of AlSi10Mg Alloy Castings. // Metalurgija. 46 (2007) , 1; 29-35 (journal article).
|
186. Zrnik, J.; Mamuzić, Ilija; Dobatkin, S. V.; Stejskal, Z.; Kraus, L.
Low Carbon Steel Processed by Equal Channel Angular Warm Pressing. // Metalurgija = Metallurgy. 46 (2007) , 1; 21-27 (journal article).
|
187. Žanetić, Mirella; Cerretani, Lorenzo; Del Carlo, Michelle.
Preliminary characterisation of monovarietal extra-virgin olive oils obtained from different cultivars in Croatia. // Journal of Commodity Science. 46 (2007) ; 79-94 (journal article).
|
|
|
|
|
|
|
| |
Nonscientific papers in other journals
|
| |
1. Hršak, Damir.
Editorial 3(2013)1. // The Holistic Approach to Environment. 3 (2013) , 1; 1-2.
|
2. Globa, Larisa; Novogrudska, Rina; Mamuzić, Ilija.
Development of a model for the internet portal "Strength of materials". // Materiali in Tehnologije. 46 (2012) , 4; 407-410 (journal article).
|
3. Hren, Smiljan; Lalić, Marijo; Žmak, Irena.
Effect of TiO2 Coatings on the Quality of Centrifugal Copper Alloy Castings. // Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo. 54 (2012) , 2-3; 61-65 (journal article).
|
4. Mamuzić, Ilija.
Success raises expectation: Print of Monography also with »Bibliography of Journal Metalurgija 1962 - 2012«. // METALURGIJA. 51 (2012) , 1; 5-8.
|
5. Rađenović, Ankica.
Properties of carbon anode components for aluminium production. // Nafta : exploration, production, processing, petrochemistry. 63 (2012) , 3-4; 111-114 (journal article).
|
6. Hršak, Damir.
Editorial 1(2011)1. // The Holistic Approach to Environment. 1 (2011) , 1; 1-2.
|
7. Hršak, Damir.
New scientific Journal "The Holistic Approach to Environment"ch to Environment". // Jahr. 2 (2011) , 3; 327-328.
|
8. Hršak, Damir.
Editorial 1(2011)2. // The Holistic Approach to Environment. 1 (2011) , 2; 39-40.
|
9. Hršak, Damir.
Editorial 1(2011)3. // The Holistic Approach to Environment. 1 (2011) , 3; 85-86.
|
10. Mamuzić, Ilija.
50th year of the publishing of the journal Metalurgija. // Metalurgija. 50 (2011) , 1; 3-7.
|
11. Mamuzić, Ilija.
Acknowledgement to Reviewers for 2010. // Metalurgija. 50 (2011) , 1; 8-8.
|
12. Mamuzić, Ilija.
10th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy" SHMD '2012 : First Circular - Call for Papers. // Metalurgija. 50 (2011) , 2; 75-80.
|
13. Mamuzić, Ilija.
Acknowledgement to Reviewers for 2011. // Metalurgija. 50 (2011) , 4; 244-244.
|
14. Babutsky, A. P.; Chrysanthou, A.; Ioannou, J.; Mamuzić, Ilija.
Correlation between corrosion resistance and hardness scattering of structural metals treated by pulse electric current. // Materiali in tehnologije. 44 (2010) , 2; 99-102 (journal article).
|
15. Kaštelan-Macan, Marija.
50th anniversary of Faculty of Metalurgy, University in Zagreb. // Glasnik Društva diplomiranih inženjera i prijatelja Kemijsko tehnološkog studija u Zagrebu. 45 (2010.) ; 19-19.
|
16. Kharlamov, Yuriy; Dal, Vladimir; Mamuzić, Ilija; Lopata, Larysa; Pisarenko, G. S.
Tribological coatings selection and development materiali in technologie. // Materiali in tehnologije. 44 (2010) , 5; 283-287 (journal article).
|
17. Mamuzić, Ilija.
Minutes. // Metalurgija. 49 (2010) , 4; 291-292.
|
18. Rađenović, Ankica; Terzić, Katarina.
Microstructure and physical-chemical properties of petroleum coke as carburizer. // Nafta : exploration, production, processing, petrochemistry. 61 (2010) , 3; 136-139 (journal article).
|
19. Mamuzić, Ilija.
Croatian Metallurgical Society (CMS) - 55th anniversary of the foundation. // Zavarivanje. 52 (2009) , 1/2; 35-38 (journal article).
|
20. Mamuzić, Ilija.
First Circular - Call for Papers, 9th International Symposium of Croatian Metallurgical Society SHMD’ 2010. // Metalurgija. 48 (2009) , 1; 3-8.
|
21. Mamuzić, Ilija.
Acknowledgements to Reviewers for 2009. // Metalurgija. 48 (2009) , 4; 228-228.
|
22. Mamuzić. Ilija.
( Croatian Metallurgical Society (CMS) - 55th anniversary of the foundation ) (2nd part). // Zavarivanje. 52 (2009) , 3/4; 127-130 (journal article).
|
23. Črnko, Josip; Jelić, Predrag; Kundak, Mijo; Lazić, Ladislav.
Technological Indicators of Operation of the Rotating-hearth Furnace in Conditions of Discontinued Production. // Metalurgija. 47 (2008) , 2; 139-141 (journal article).
|
24. Mamuzić, Ilija.
Minutes of the meeting of the Editorial Board of Journal Metalurgija, held on 23 June 2008 in the hotel Ivan-Solaris Šibenik with the beginning at 6:30pm. // Metalurgija. 47 (2008) , 4; 291-294.
|
25. Mamuzić, Ilija.
Acknowledgements to Reviewers for 2008. // Metalurgija. 48 (2008) , 1; 14-14.
|
26. Şofilić, Tahir; Unkić, Faruk.
IPPC directive (96/61/EC) and its cignificance for Croatian steel mills and foundries. // Ljevarstvo. 50 (2008) , 4; 107-117 (review article).
|
27. Sučik, Gabriel; Hršak, Damir; Fedoročkova, Alena; Lazić, Ladislav.
The Preliminary Characterization of Serpentinite from Ljeskovac Locality in Croatia. // Acta metallurgica Slovaca. 14 (2008) , 2; 275-280 (journal article).
|
28. Črnko, Josip; Jelić, Predrag; Lazić, Ladislav; Kundak, Mijo.
Operation Indicators of the Rotating-hearth Furnace In Restrictive Manufacturing Conditions. // Metalurgija. 46 (2007) , 4; 291-293 (journal article).
|
29. Jelić, Predrag; Lazić, Ladislav; Črnko, Josip.
Analysis of the Material Loss of Steel Charge in the Rotary-Hearth Furnace. // Acta Metallurgica Slovaca. 13 (2007) , 3; 135-139 (journal article).
|
30. Wangyao, P.; Zrnik, J.; Mamuzić, Ilija; Polsilapa, S.; Klaijumrang, S.
Restoration and Thermal Stability Investigation of Intermetllic Phase in Exposed Nickel Base Superalloy Udimet 500 Turbine Blades. // Metalurgija. 46 (2007) , 3; 195-199 (preliminary note).
|
|
|
|
|
|
|
| |
Conference reports (abstracts) in other journals
|
| |
1. Andronov, I. N.; Ćurćija, D.
Hydrogen embrittlement of shipbuilding steel in sea water // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 393-393 (poster,international peer-review,abstract,scientific).
|
2. Artsibashev, M. H.; Gergel, F. K.; Ćurćija, D.
Characterisation of steel composites reinforced by TiC // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 389-389 (poster,international peer-review,abstract,scientific).
|
3. Balakan, M. A.; Mamuzić, Ilija.
Effect of plastic deformation on microstructure and poperties of Al-Cu alloy // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 418-418 (poster,international peer-review,abstract,scientific).
|
4. Balakin, V. F.; Nikolaenko, J. N.; Solov`eva, I. A.; Sergeeva, O. V.; Jurković, M.
Computer designing оf process production cold-deformed tubes // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 419-419 (poster,international peer-review,abstract,scientific).
|
5. Baranivsky, M. P.; Katsman, A. I.; Devčić, N.
Precipitation hardening in metals // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 389-389 (poster,international peer-review,abstract,scientific).
|
6. Baumshtein, D. V.; Mamuzić, Ilija.
Mechanical behaviour of stainless steel under warm working conditions // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 398-398 (poster,international peer-review,abstract,scientific).
|
7. Belobrov, N. A.; Jurković, N.
Prediction of embrittlement during aging of stainless steel welds // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 391-391 (poster,international peer-review,abstract,scientific).
|
8. Berezyanko, G. V.; Chukhno, V. Yu.; Mamuzić, Ilija.
Behaviour of metal flow in the spreading extrusion process // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 418-418 (poster,international peer-review,abstract,scientific).
|
9. Blumkin, G. M.; Jakšić, D.
Influence of homogenisation treatment on microstructure and hot ductility of aluminium alloy AL 27. // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 398-398 (poster,international peer-review,abstract,scientific).
|
10. Bogomolets, L. N.; Shor, J. A.; Jurković, M.
Welding practices of arc welding of titanium alloys // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 387-387 (poster,international peer-review,abstract,scientific).
|
11. Bondar, A. A.; Kulichenko, V. A.; Mamuzić, Ilija.
Use of waste a paper-cardboard of manufacture in composite materials // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 387-387 (poster,international peer-review,abstract,scientific).
|
12. Borisoglebsky, L. T. : Gordeev, A. S.; Devčić, N.
Fabrication of alumina dispersion strengthened copper strips by internal oxidation and hot rolling // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 418-418 (poster,international peer-review,abstract,scientific).
|
13. Chernenko, K. U.; Chushko, F. I.; Križanić, R.
Microstructure and strength modelling of Al-Cu-Mg alloys // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 388-388 (poster,international peer-review,abstract,scientific).
|
14. Chumachenko, L. K.; Mamuzić, Ilija.
Study on effect of residual stress distributions on kinetics of static strain aging after cold rolling // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 398-398 (poster,international peer-review,abstract,scientific).
|
15. Chushkov, A. P.; Šipalo Žuljević, J.
The overaging kinetics of Al–Zn–Mg–Cu alloy // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 392-392 (poster,international peer-review,abstract,scientific).
|
16. Chyorny, A. A.; Demchenko, V. P.; Devčić, N.
Hot plane strain compression testing of aluminium specimens // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 417-417 (poster,international peer-review,abstract,scientific).
|
17. Datsenko, Yu. I.; Jakšić, D.
Processing, microstructure, and properties of Mg–SiC composites // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 395-395 (poster,international peer-review,abstract,scientific).
|
18. Derkach, A. S.; Mishakov, A. L; Jakšić, D.
Computer modelling of dendritic grain structures // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 395-395 (poster,international peer-review,abstract,scientific).
|
19. Dobatkin, S. V.; Mamuzić, Ilija.
Structure and properties of ultrafine-grained aluminium alloys and possibilities of their application // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 381-382 (invited talk,international peer-review,abstract,scientific).
|
20. Dobrovolsky, K. L.; Vinokurov, T. I.; Jurković, M.
Microstructure and shape memory properties of Fe–Ru alloy // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 390-391 (poster,international peer-review,abstract,scientific).
|
21. Doldzhanskiy, A. M.; Bondarenko, O. A.; Mamuzić, Ilija.
Method of quality complex index maximizing for product and process // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 429-429 (poster,international peer-review,abstract,scientific).
|
22. Dolzhanskiy, A. M.; Mos’pan, N. N.; Ćurćija, D.
Quality evaluation of modeling of virtual experiment // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 429-429 (poster,international peer-review,abstract,scientific).
|
23. Fomichev, S. L.; Ćurćija, D.
Mechanical properties and microstructure of high strength bainitic steels // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 393-393 (poster,international peer-review,abstract,scientific).
|
24. Furmanchuk, V. P.; Šipalo Žuljević, J.
Deformation of aluminium alloy AL20 in semisolid state // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 418-418 (poster,international peer-review,abstract,scientific).
|
25. Galiulin, A. L.; Zverev, M. N.; Jurković, M.
Low cycle fatigue of low-alloyed carbon steel // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 390-390 (poster,international peer-review,abstract,scientific).
|
26. Galushko, I. M.; Danilenko, V. A.; Mamuzić, Ilija.
Criterion for peritectic reaction // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 399-399 (poster,international peer-review,abstract,scientific).
|
27. Galushko, I. M.; Dvornikova, K. A.; Jurković, M.
Calculation of the number of phase constituents in peritectic systems with separate crystallization of phases // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 399-399 (poster,international peer-review,abstract,scientific).
|
28. Gasik, M. I.; Zubov, V. L.; Šipalo Žuljević, J.
Problem questions of physics and chemistry of the concentration of radionuclides in the slag charging materials smelting ferrosilicon // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 410-410 (poster,international peer-review,abstract,scientific).
|
29. Gorynin, N. L.; Nefedov, F. K.; Mamuzić, Ilija.
Size distribution of spray atomised aluminium alloy powders produced during linear atomization // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 389-389 (poster,international peer-review,abstract,scientific).
|
30. Goshovsky, V. O.; Potyomkin, S. M.; Šipalo Žuljević, J.
Influence of nitriding on fatigue strength of chromium-molybdenum steels // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 394-394 (poster,international peer-review,abstract,scientific).
|
31. Gotsman, D. M.; Mamuzić, Ilija.
Effect of austenite grain size on isothermal bainite transformation in low carbon microalloyed steel // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 396-396 (poster,international peer-review,abstract,scientific).
|
32. Grechanyuk, V. G.; Mamuzić, Ilija.
Features of structure formation in composite materials based on copper, produced by electron-beam method // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 385-385 (poster,international peer-review,abstract,scientific).
|
33. Grechishkina, A. M.; Piskun, G. I.; Živković, V.
Transformation of textures in hot rolled microalloyed steel // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 418-418 (poster,international peer-review,abstract,scientific).
|
34. Gubenko, Sv.; Križanić, R.
Melting and crystallization of non-metallic inclusions under laser treatment of steels // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 409-409 (poster,international peer-review,abstract,scientific).
|
35. Gudyma, M. I.; Jakšić, D.
Behaviour of binary Al–2Li alloy at high temperature, high strain forging // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 395-395 (poster,international peer-review,abstract,scientific).
|
36. Gul, Iurii; Chmeleva, V.; Mamuzić, Ilija.
Efficiency of use of stationary and non-stationary coolers at heat treatment of metal products: theory and directions of practical use // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 398-398 (poster,international peer-review,abstract,scientific).
|
37. Hamidov, F. G.; Mamedov, Z. G.; Rakhmanov, S. R.; Mamuzić, Ilija.
Combined deformation and heat treatment of steel with a bainitic structure // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 420-420 (poster,international peer-review,abstract,scientific).
|
38. Ivanchenko, A. V.; Dolgov, N. A.; Vitez, Ivan.
Method of measuring strain by resistive gauge with automation calculation of transverse sensitivity correction // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 385-385 (poster,international peer-review,abstract,scientific).
|
39. Ivchenko, Z. A.; Lunev, V.V.; Križanić, R.
Factors of the mechanical properties of cast titanium alloy VT5L (VT5L-MS) // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 398-398 (poster,international peer-review,abstract,scientific).
|
40. Kalinina, N. Ju.; Šipalo Žuljević, J.
Methods of identification of the structural components of alloys on their color images // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 399-399 (poster,international peer-review,abstract,scientific).
|
41. Kalinin, V. T.; Syslo, N. V.; Vitez, Ivan.
Studies on the use in the manufacture of iron nano-modifier grinding balls // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 409-409 (poster,international peer-review,abstract,scientific).
|
42. Kamkina, L. V.; Stovba, Y. V.; Križanić, R.
Physico-chemical analysis of nonequilibrium phase interactions in obtaining high-carbon ferromanganese // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 410-410 (poster,abstract,scientific).
|
43. Karasik, T. L.; Jurković, M.
Research of sheetings for processing of metals by pressure at heats // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 419-419 (poster,international peer-review,abstract,scientific).
|
44. Karpov, V. V.; Karpov, V. U.; Vitez, Ivan.
Reception of cast porous alloys – gazers // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 409-409 (poster,international peer-review,abstract,scientific).
|
45. Kavats, A. A.; Devčić, N.
Modelling of microstructure formation of metallic alloys with external vibro influence // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 400-400 (poster,international peer-review,abstract,scientific).
|
46. Kharchenko, V. K.; Bukhanovsky, V. V.; Mamuzić, Ilija.
Methods and experimental techniques of investigation into the physical and mechanical characteristics of metallic materials at high temperatures // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 386-386 (poster,international peer-review,abstract,scientific).
|
47. Kiriya, R. V.; Braginec, D. D.; Tkalčić, D.
Adaptive control by an usrednyayushim bunker working in the conditions of coal mines // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 409-409 (poster,international peer-review,abstract,scientific).
|
48. Kopersak, Yu. P.; Getmanchuk, S. T.; Križanić, R.
Corrosion behaviour of the fusion zone of welds of Al–Mg alloy // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 388-388 (poster,international peer-review,abstract,scientific).
|
49. Kormanikova, E.; Mamuzić, Ilija.
Optimization of laminates subjected to failure criterion // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 425-425 (poster,international peer-review,abstract,scientific).
|
50. Kormanikova, E.; Mamuzić, Ilija.
Shear deformation laminate theory used for sandwiches // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 425-425 (poster,international peer-review,abstract,scientific).
|
51. Korshunov, P. I.; Shishkov, G. L.; Jakšić, D.
Effect of heat treatment on fatigue of aluminium alloy // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 397-397 (poster,international peer-review,abstract,scientific).
|
52. Korshunov, Yu. A.; Mamuzić, Ilija.
Strain hardening and steady state deformation of Al–Mg alloys // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 418-418 (poster,international peer-review,abstract,scientific).
|
53. Krivsha, M. A.; Machulenko, L. I.; Mamuzić, Ilija.
Microstructure and mechanical properties of a Ti–14Mo based beta titanium alloy // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 395-395 (poster,international peer-review,abstract,scientific).
|
54. Kuchera, M. A.; Yumashev, S. A.; Mamuzić, Ilija.
Castability of directionally dolidified nickel base superalloys // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 389-389 (poster,international peer-review,abstract,scientific).
|
55. Kucherenko, B. A.; Bilozir, L. M; Živković, V.
Effect of phosphorus on modification of eutectic silicon in Al–Si–Mg alloy // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 393-393 (poster,international peer-review,abstract,scientific).
|
56. Kucher, N. K.; Kucher, V. N.; Tkalčić, D.
A version of the Filonenko-Borodich criterion of strength for materials with different response in tension and compression // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 387-387 (poster,international peer-review,abstract,scientific).
|
57. Kuleshov, A. K.; Kucherenko, R. T.; Ćurćija, Dušan.
Influence of titanium on hot ductility of C–Mn–Al steels // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 417-417 (poster,international peer-review,abstract,scientific).
|
58. Kurash, L. A.; Bochkin, A. N; Vitez, I.
Laser transformation hardening of steels // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 389-389 (poster,international peer-review,abstract,scientific).
|
59. Kuroles, L. M.; Pyontkovsky, F. K.; Živković, V.
Degradation of microstructure in plain and platinum aluminide coatings on superalloy ZhS6U during isothermal oxidation // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 392-392 (poster,abstract,scientific).
|
60. Kuznetsov, D. A.; Mamuzić, Ilija.
Effect of fine grained ferrite in surface layers on fatigue behavior of low carbon steel plates // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 418-418 (poster,international peer-review,abstract,scientific).
|
61. Levko, O.; Kylyvnyk, K.; Ćurćija, D.
The electrochemical properties of LiMn2O4 electrodes deposited by the hpvds method of condensation – solidification // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 399-399 (poster,international peer-review,abstract,scientific).
|
62. Malinovsky, L. F.; Križanić, R.
Stress induced martensite transformation texture in austenitic stainless steel // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 398-398 (poster,international peer-review,abstract,scientific).
|
63. Marchenko, A. M.; Jurković, M.
Effect of annealing on the working capacity of the heat-affected zone of weds of titanium alloy // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 387-387 (poster,international peer-review,abstract,scientific).
|
64. Marchenko, L. I.; Ćurćija, D.
Effect of alumina particle size and thermal condition of casting on microstructure and mechanical properties of stir cast Al-Al2O3 composites // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 394-394 (poster,international peer-review,abstract,scientific).
|
65. Marchuk, P. I.; Mirovich, O. P.; Jakšić, D.
Effect of thermomechanical treatment on flow behaviour, microstructure and texture development of aluminium alloy in semisolid state // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 397-397 (poster,international peer-review,abstract,scientific).
|
66. Markevich. I. V.; Grigorenko, V. U.; Drojja, P. V.; Križanić, R.
Determination of the radius riding in the uneven distribution of normal contact stresses along the perimeter of the fire // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 420-420 (poster,international peer-review,abstract,scientific).
|
67. Mayevsky, G. V.; Živković, V.
Microstructure and mechanical properties of C–Si–Mn steels after simulated thermomechanical processing // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 394-394 (poster,international peer-review,abstract,scientific).
|
68. Mazorchuk, V. F.; Mamuzić, Ilija.
Research of the microstructure of cast metal obtained by using floating top insert // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 399-399 (poster,international peer-review,abstract,scientific).
|
69. Micheľ, J.; Buršak, M.; Mamuzić, Ilija.
Degradation of mechanical properties of CrMo creep resistant steel operating under conditions of creep // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 383-383 (poster,international peer-review,abstract,scientific).
|
70. Mitchenko, S. M.; Shlapak, F. O.; Križanić, R.
Creep of Sn–45Pb–2Sb solder alloy // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 388-388 (poster,international peer-review,abstract,scientific).
|
71. Mitrofanov, H. L.; Jakšić, D.
Failure of ultra high strength low alloy steel // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 396-396 (poster,international peer-review,abstract,scientific).
|
72. Molybozhenko, A. V.; Jurković, M.
High-temperature creep of an Mg-2AL alloy // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 388-388 (poster,international peer-review,abstract,scientific).
|
73. Momot, J. G.; Devčić, N.
Cost management industry in crisis // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 430-430 (poster,international peer-review,abstract,scientific).
|
74. Movchan, A.; Mamuzić, Ilija.
Formation of three-phase composite materials of ferritic iron alloys by carburization // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 399-399 (poster,international peer-review,abstract,scientific).
|
75. Myronova, T. M.; Devčić, N.
The use of carbide transformations for white cast irons ductility improvement // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 400-400 (poster,international peer-review,abstract,scientific).
|
76. Myronova, T. M.; Ruden, D. A.; Mamuzić, Ilija.
The influence of matrix structure on the deformed cast irons properties // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 418-418 (poster,international peer-review,abstract,scientific).
|
77. Myshlaevsky, A. F.; Miklun, M. P.; Mamuzić, Ilija.
Effect of plastic strain on grain size of ferrite transformed from deformed austenite in Si-Mn steel // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 389-389 (poster,international peer-review,abstract,scientific).
|
78. Naumov, O. S.; Fomenko, G. V.; Ćurćija, D.
Working out of structures of astringents compositions with use of a waste of a metallurgical complex // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 410-410 (poster,international peer-review,abstract,scientific).
|
79. Pankov, R. V.; Mamuzić, Ilija.
Structural transformation during the heat treatment of chromium coatings // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 400-400 (poster,international peer-review,abstract,scientific).
|
80. Pinchuk, S. I.; Balakin, V. F.; Tishkevich. D. G.; Mamuzić, Ilija.
The increasing of the corrosion resistance of the tubing // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 419-419 (poster,international peer-review,abstract,scientific).
|
81. Pochinok, V. L.; Gadenin, M. N.; Vitez, Ivan.
Dynamic fracture toughness of heat affected zone of 8Cr–1.5Mo steel from instrumented drop weight tests // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 390-390 (poster,international peer-review,abstract,scientific).
|
82. Polyakova, N.; Boyko, M.; Mamuzić, Ilija.
The influence structural peculiarities of high-chromium cast iron on it’s quality as wear-resistance material // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 400-400 (poster,international peer-review,abstract,scientific).
|
83. Popov, M. V.; Balakin, V. F.; Perchanik, V. V.; Bilan, K. S.; Mamuzić, Ilija.
New scheme of pilger rolling of tubes – a perspective way to obtain the required structure-sensitive properties // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 419-419 (poster,international peer-review,abstract,scientific).
|
84. Prityka, М. L.; Yatsenko, P. I.; Šipalo Žuljević, J.
Shear ligament phenomena in Al–Si alloys // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 393-393 (poster,international peer-review,abstract,scientific).
|
85. Prityka, М. L.; Yatsenko, P. I.; Vitez, Ivan.
Mechanical properties and microstructure of Ti–48Al–2W–0・5Si γ-titanium aluminide at temperatures range 20−800°C // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 389-389 (poster,international peer-review,abstract,scientific).
|
86. Rabinovitch, A. M.; Chushko, P. I.; Živković, V.
Rejuvenation process for nickel base superalloys // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 395-395 (poster,international peer-review,abstract,scientific).
|
87. Rakhmanov, S. R.; Topolov, V. L; Jurković, M.
The dynamics of unsteady processes in helical rolling mill drives // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 419-419 (poster,international peer-review,abstract,scientific).
|
88. Repyakh, S. I.; Mamuzić, Ilija.
Wax model for casting // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 410-410 (poster,international peer-review,abstract,scientific).
|
89. R. Fabik, J. Kliber, I. Mamuzić, T. Kubina, S.A. Aksenov.
Mathematical modelling of flat and shape hot rolling based on finite element methods // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 381-381 (invited talk,international peer-review,abstract,scientific).
|
90. Rudenko, N. P.; Ćurćija, D.
Mathematical model of acid etching // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 430-430 (poster,international peer-review,abstract,scientific).
|
91. Rudenko, N. P.; Shevchenko, G. I.; Vitez, I.
Оn structural transformations of silicon carbide in aluminosilicate media under heating // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 400-400 (poster,international peer-review,abstract,scientific).
|
92. Rudenko, N. P.; Šipalo Žuljević, J.
Kinetics of cathode processes on iron and steels in acid etchant // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 411-411 (poster,international peer-review,abstract,scientific).
|
93. Rybalchenko, M. A.; Golovko, V. I.; Devčić, N.
Management features by the processes of mixing of materials on a conveyer // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 410-410 (poster,international peer-review,abstract,scientific).
|
94. Safargallin, L. M.; Mamuzić, Ilija.
Microstructure and tensile properties of 8Cr–1, 5Mo steel // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 395-395 (poster,international peer-review,abstract,scientific).
|
95. Safargalov, K. M.; Polonsky, M. S.; Jurković, M.
Evolution of microstructure and plastic stability during superplastic flow in a 1201 aluminium alloy // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 417-417 (poster,international peer-review,abstract,scientific).
|
96. Seliverstov, V. U.; Loevskaya, A. A.; Jurković, M.
Prospects for the use of recycled iron-man-made origin of cold-forming mixtures // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 399-399 (poster,international peer-review,abstract,scientific).
|
97. Serenbogen, S. P.; Mashtalir, P. I.; Ćurćija, D.
Structure and microtexture changes during solution nitriding in ferritic–austenitic stainless steel // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 392-392 (poster,international peer-review,abstract,scientific).
|
98. Shaposhnikov, V. A.; Kurkotkin, G. L.; Vitez, Ivan.
Further analysis of the Monkman-Grant relationship for 2, 5 Cr-1, 5 Mo steel // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 389-389 (poster,international peer-review,abstract,scientific).
|
99. Sharabura, Т. А.; Pinchuk, V. A.; Devčić, N.
Ecological aspects of the thermal processing of water-coal fuel // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 429-429 (poster,international peer-review,abstract,scientific).
|
100. Shlomchak, G.; Mamuzić, Ilija; Sosnev, I.
Materials for modeling of the plastic forming processes of rheologically complex metals with low plasticity // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 423-423 (poster,international peer-review,abstract,scientific).
|
101. Shorshorov, E. I.; Mamuzić, Ilija.
Effect of sulphur on impact properties of bainitic or martensitic steels // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 397-397 (poster,international peer-review,abstract,scientific).
|
102. Shtorm, A. A.; Zapashnaya, I. S.; Trusevitch, G. I.; Mamuzić, Ilija.
Cast and aged structures of heat resistant steel solidified in an electromagnetic field and under different cooling conditions // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 391-391 (poster,international peer-review,abstract,scientific).
|
103. Sivoplyas, U. V.; Jurković, M.
Internal innovations as intangible project assets of industrial enterprises // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 429-429 (poster,international peer-review,abstract,scientific).
|
104. Sivoplyas, U. V.; Karmazina, L. L.; Križanić, Rade.
Knowledge management in project management area at industrial enterprises // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 429-429 (poster,international peer-review,abstract,scientific).
|
105. Skulsky, A. L.; Mamuzić, Ilija.
Effect of heat input on residual stress distributions for weld joints on to X18N9T steel // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 388-388 (poster,international peer-review,abstract,scientific).
|
106. Solov`eva, I. A.; Tereschenko, V. S.; Golubitsky, A. S.; Sergeeva, O. V.; Tkalčić, D.
Prediction planned targets extended periods of melting // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 411-411 (poster,international peer-review,abstract,scientific).
|
107. Synytsina, Yu. P.; Ćurćija, D.
The metallographic analysis of iron sulfide thin films which have been obtained using high-speed evaporation method // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 400-400 (poster,international peer-review,abstract,scientific).
|
108. Timofeev, N. M.; Šipalo Žuljević, J.
Flow transitions in vacuum arc remelting // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 393-393 (poster,international peer-review,abstract,scientific).
|
109. Troyan, L. K.; Zaytsev, A. F.; Križanić, R.
Evaluation of cyclic strength of welded joints with technological defects // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 388-388 (poster,international peer-review,abstract,scientific).
|
110. Tsyban’ov, G.V.; Novikov, A. I.; Mamuzić, Ilija.
Determination of the kinetics of the stress-strain state of elements under cyclic bending // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 385-385 (poster,international peer-review,abstract,scientific).
|
111. Tymchenko, V. A.; Sigalov, B. R.; Devčić, N.
Temperature changes occurring during extrusion of metals // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 418-418 (poster,international peer-review,abstract,scientific).
|
112. Usenko, R. V.; Tkalčić, D.
Viscosity phosphate slurry to produce ceramic shell molds // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 410-410 (poster,international peer-review,abstract,scientific).
|
113. Uskov, E. I.; Mamuzić, Ilija.
On interrelation between short-term and long-term strength characteristics of materials // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 385-385 (poster,international peer-review,abstract,scientific).
|
114. Usov, V. V.; Shkatulyak, N. M.; Tkachuk, E. N.; Jurković, M.
Texture and anisotropy of corrosion resistance of low-alloyed steel // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 387-387 (poster,international peer-review,abstract,scientific).
|
115. Yuzyshin, A. Z.; Devčić, N.
Slip band decohesion as unifying fracture event during fatigue crack growth // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 391-391 (poster,international peer-review,abstract,scientific).
|
116. Zhegur, A. A.; Repyakh, S. I.; Šipalo Žuljević, J.
On reducing the cost of preparation of ceramic shell molds for casting // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 409-409 (poster,international peer-review,abstract,scientific).
|
117. Zhmachenko, T. A.; Kristopchuk, F. O.; Mamuzić, Ilija.
Computational modelling of effects of roll gap geometry in hot rolling // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 417-417 (poster,international peer-review,abstract,scientific).
|
118. Zhuravel, V. P.; Karasik, A. O.; Mamuzić, Ilija.
Technological processing at hot pressing of pipes // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 419-419 (poster,international peer-review,abstract,scientific).
|
119. Zhurba, A. A.; Mikhalyov, A. I.; Vitez, Ivan.
Fractal analysis of surfaces of penrose // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 429-429 (poster,international peer-review,abstract,scientific).
|
120. Zvereva, V. M.; Jurković, M.
Fatigue performance and microanalysis of heat treated KhN35VT stainless steel // Summaries of lectures of the 10th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2012. 391-391 (poster,international peer-review,abstract,scientific).
|
121. Črnko, Josip.
Operating verification of the rotating-hearth furnace firing system // Summaries of lecture of 9th International Symposium of Croatian Metallurgical Society, published in Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 230-230 (poster,international peer-review,abstract,scientific).
|
122. Klaić, Boris; Malina, Jadranka; Čelebić, Asja; Svetličić, Vesna; Šegota, Suzana; Baučić, Ivo.
Co-Cr-Mo alloy surface and composition prior and after corrosion in fluids simulating oral conditions // 4. međunarodni kongres Hrvatskog stomatološkog društva HLZ-a i 1. Kongres Hrvatskog društva za oralnu medicinu i patologiju HLZ-a : knjiga sažetaka ; u: Acta Stomatologica Croatica 42 (2008).
395-395 (lecture,international peer-review,abstract,scientific).
|
123. Babich, A. P.; Kochubey, O. O.; Mamuzić, Ilija; Yevdokymov, D. V.
Mathematical modeling of three-phase system evolution // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,international peer-review,abstract,scientific).
|
124. Babich, A. P.; Kochubey, O. O.; Mamuzić, Ilija; Yevdokymov, D. V.
Mathematical modeling of sherardizing // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,international peer-review,abstract,scientific).
|
125. Barišić, Branimir; Car, Zlatan; Ikonić, Milan.
Analysis of Different Modeling Approach at Determining of Backward Extrusion Force on AlCu5PbBi Material // 8th International Symposium of the Croatian Metallurgical Society : Summeries of Lectures = 8. međunarodni simpozij Hrvatskog metalurškog društva : sažeci predavanja ; u: Metalurgija 47 (2008) (3) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 269-269 (lecture,international peer-review,abstract,scientific).
|
126. Barišić, Branimir; Car, Zlatan; Kršulja, Marko; Ikonić, Milan.
MATHEMATICAL MODELING, SIMULATION AND OPTIMIZATION OF BULK METAL FORMING PROCESS // Metallurgy, vol.47, no.3, / Ilija Mamuzić, editor(s).
Zagreb : Hrvatsko Metalurško Društvo, 2008. 269-269 (lecture,international peer-review,abstract,scientific).
|
127. Bevza, E. K.; Kochubey, O. O.; Mamuzić, Ilija; Tkachenko, I. I.; Yevdokymov, D. V.
Production of porous metal in microgravity condition // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,international peer-review,abstract,scientific).
|
128. Blažević, Dalibor; Vuković, Aleksandar; Ikonić, Milan.
AUTOMATION OF MATERIAL TRACKING IN ROLLING MILL PROCESS // Metallurgy, vol.47, no.3 / Ilija Mamuzić, editor(s).
Zagreb : Hrvatsko Metalurško Društvo, 2008. 270-270 (lecture,international peer-review,abstract,scientific).
|
129. Blažević, Dalibor; Vuković, Aleksandar; Mikac, Tonči.
INTELIGENT AGENTS APPLICATION WITHIN THE SYSTEM FOR ROLLING MILL PRODUCTION // Metallurgy, vol.47, no.3 / Ilija Mamuzić, editor(s).
Zagreb : Hrvatsko Metalurško Društvo, 2008. 280-280 (poster,international peer-review,abstract,scientific).
|
130. Blažević, Dalibor; Vuković, Aleksandar; Mikac, Tonči.
ALGORITHM FOR PREVENTION OF MOLTEN STEEL STICKING ONTO MOLD IN CONTINOUS CASTING PROCESS // Metallurgy, vol.47, no.3 / Ilija Mamuzić, editor(s).
Zagreb : Hrvatsko Metalurško Društvo, 2008. 280-280 (poster,international peer-review,abstract,scientific).
|
131. Brazaluk, Iu. V.; Kochubey, O. O.; Mamuzić, Ilija; Polyakov, M. V.; Yevdokymov, D. V.
Mathematical modeling of air pollution by dust // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,abstract,expert).
|
132. Brazaluk, Iu. V.; Kochubey, O. O.; Mamuzić, Ilija; Polyakov, M. V.; Yevdokymov, D. V.
Calculation of heating and cooling of steel ingots by combined splitting and boundary element method // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,international peer-review,abstract,scientific).
|
133. Buchanovsky, V. V.; Kliber, J.; Mamuzić, Ilija; Polishuk, E. P.
The effect of heat treatment on mechanical characteristics and nature of failure of sheet molybdenum alloys // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,international peer-review,abstract,scientific).
|
134. Budić, Ivan; Novoselović, Daniel.
Testing of mathematical model for calculating residual stress in iron castings // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija" / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 255-266 (poster,international peer-review,abstract,scientific).
|
135. Bukhanovskii, V. V.; Bockus, S.; Mamuzić, Ilija.
The influence of a high-temperature gaseous medium on the structure and mechanical characteristics of a niobium alloy of the Nb-W-Mo-Zr system // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,international peer-review,abstract,scientific).
|
136. Bukhanovskii, V. V.; Bychkov, S. I.; Mamuzić, Ilija.
The influence of vacuum heat treatment and annealing on the structure and mechanical characteristics of a nickel-based superalloy // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,international peer-review,abstract,scientific).
|
137. Bukhanovskii, V. V.; Constantinescu, D.; Mamuzić, Ilija.
The influence of electropolishing on the mechanical characteristics of chromium-based alloy VKh-2K // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,international peer-review,abstract,scientific).
|
138. Bukhanovskii, V.V.; Constantinescu, D.; Mamuzić, Ilija.
Characteristics of high-temperature strength of titanium-aluminum alloy (γ -TiAl alloy) VIT-50 // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,international peer-review,abstract,scientific).
|
139. Buršák, M.; Mamuzić, Ilija.
The influence of the loading rate on the mechanical properties of drawing steel sheet // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,international peer-review,abstract,scientific).
|
140. Car, Zlatan; Barišić, Branimir; Ikonić, Milan.
CNC TURNING CENTER GA BASED OPTIMIZATION // Metallurgy, vol.47, no.3 / Ilija Mamuzić, editor(s).
Zagreb : Hrvatsko Metalurško Društvo, 2008. 280-280 (lecture,international peer-review,abstract,scientific).
|
141. Car, Zlatan; Barišić, Branimir; Kršulja, Marko.
Machining center efficiency optimization based on evolutionary algorithm // Metallurgy, vol. 47, no.3 / Ilija Mamuzić, editor(s).
Zagreb : Hrvatsko Metalurško Društvo (8, 2008), 2008. 280-280 (lecture,international peer-review,abstract,scientific).
|
142. Džambas, Igor; Vuković, Aleksandar; Ikonić, Milan.
SOFTWARE SUPPORT IN PLANNING OF COMPLEX MANUFACTURING SYSTEMS // Metallurgy, vol.47, no.3 / Ilija Mamuzić, editor(s).
Zagreb : Hrvatsko Metalurško Društvo, 2008. 280-280 (lecture,international peer-review,abstract,scientific).
|
143. Džambas, Igor; Vuković, Aleksandar; Mikac, Tonči.
DIRECT NUMERICAL CONTROL AS INFLUENT FACTOR ON PRODUCTIVITY // Metallurgy, vol.47, no.3 / Ilija Mamuzić, editor(s).
Zagreb : Hrvatsko Metalurško Društvo, 2008. 280-280 (lecture,abstract,scientific).
|
144. Gorelova, K. V.; Veselovskiy, V. B.; Mamuzić, Ilija.
Mathematical simulation of the processes of solids heating intensification // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,international peer-review,abstract,scientific).
|
145. Grechanyuk, N. I.; Grechanyuk, I. N.; Osokin, V. A.; Minakova, R. V.; Mamuzić, Ilija.
Peculiarities of structure, phisico-mechanical characteristics, deformation and rupture of condensed composite materials for electric contacts // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,international peer-review,abstract,scientific).
|
146. Ikonić, Milan; Barišić, Branimir; Blažević, Dalibor.
IDENTIFICATION AND QUANTIFICATION OF RAW MATERIALS DURING DESIGNING OF CAST PRODUCING PROCESS // Metallurgy, vol.47, no.3 / Ilija Mamuzić, editor(s).
Hrvatsko Metalurško Društvo, 2008. 280-280 (lecture,international peer-review,abstract,scientific).
|
147. Ikonić, Milan; Džambas, Igor; Blažević, Dalibor.
CHOOSING OF PRODUCTION SYSTEM MODEL // Metallurgy, vol.47, no.3 / Ilija Mamuzić, editor(s).
Zagreb : Hrvatsko Metalurško Društvo, 2008. 280-280 (lecture,international peer-review,abstract,scientific).
|
148. Ikonić, Milan; Mikac, Tonči; Džambas, Igor.
PROCESS METHOD OF GROUPING THE WORKPIECES // Metallurgy, vol.47, no.3 / Ilija Mamuzić, editor(s).
Zagreb : Hrvatsko Metalurško Društvo, 2008. 280-280 (lecture,international peer-review,abstract,scientific).
|
149. Ikonić, Milan; Mikac, Tonči; Perinić, Mladen.
PLANNING OF MATERIAL CONSUMPTION IN SERIAL PRODUCTION OF THE CASTINGS // Metallurgy, vol.47, no.3 / Ilija Mamuzić, editor(s).
Zagreb : Hrvatsko Metalurško Društvo, 2008. 280-280 (lecture,international peer-review,abstract,scientific).
|
150. Kochubey, O. O.; Mamuzić, Ilija; Polyakov, M. V.; Yevdokymov, D. V.
Boiling of liquid film on curvilinear surface // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,international peer-review,abstract,scientific).
|
151. Kochubey, O. O.; Mamuzić, Ilija; Polyakov, M. V.; Yevdokymov, D. V.
Calculation of thermal stresses by boundary element method // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 255-266 (poster,international peer-review,abstract,scientific).
|
152. Kochubey, O. O.; Mamuzić, Ilija; Polyakov, M. V.; Yevdokymov, D. V.
Numerical calculation of slow solid-state phase transition // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 267-273 (poster,international peer-review,abstract,scientific).
|
153. Kochubey, O. O.; Mamuzić, Ilija; Polyakov, M. V.; Yevdokymov, D. V.
Mathematical modeling of thermal pollution of environment // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 275-284 (poster,international peer-review,abstract,scientific).
|
154. Kochubey, O. O.; Mamuzić, Ilija; Polyakov, M. V.; Yevdokymov, D. V.
Application of computational models in metallurgical investigation // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,international peer-review,abstract,scientific).
|
155. Kochubey, O. O.; Mamuzić, Ilija; Smolens’ ka, T. E.; Yevdokymov, D. V.
High temperature handling of metal products // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,international peer-review,abstract,scientific).
|
156. Kršulja, Marko; Barišić, Branimir; Car, Zlatan.
Optimization of 3-2-1 clamping method in milling operations // Metallurgy, vol. 47, no.3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko Metalurško Društvo, 2008. 270-270 (lecture,international peer-review,abstract,scientific).
|
157. Kršulja, Marko; Barišić, Branimir; Car, Zlatan.
Analysis of different modeling approach at determining of backward extrusion force on AlCu5PbBi material // Metallurgy, vol. 47, no.3 / Ilija Mamuzić, editor(s).
Zagreb : Hrvatsko Metalurško Društvo (8, 2008), 2008. 282-282 (lecture,international peer-review,abstract,scientific).
|
158. Malaya, J. A.; Veselovsky, V. B.; Mamuzić, Ilija.
Mathematical modeling of pulse surface strengthening // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,international peer-review,abstract,scientific).
|
159. Mamuzić, Ilija; Ćurčija, Dušan; Vodopivec, Franc.
Lubricant for the rolling and drawing of metals // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,international peer-review,abstract,scientific).
|
160. Selezneva, N. V.; Veselovskyj, V. B.; Mamuzić, Ilija.
Temperature fields of compound thermal isolation at warming up and melting // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,international peer-review,abstract,scientific).
|
161. Shramko, A. V.; Mamuzić, Ilija; Danchenko, V. N.
Some examples of using the program qform 2d for solving the problems of manufacturing the wheels for the railway transport // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 267-273 (poster,international peer-review,abstract,scientific).
|
162. Veselovskiy, V. V.; Syasev, A. V.; Mamuzić, Ilija; Veselovskiy, V. B.
Determination of contact thermal resistances at extreme thermal influences // 8. međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" : sažeci ; u: Metalurgija 47(2008)3 (229-284) / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. (poster,international peer-review,abstract,scientific).
|
163. Vuković, Aleksandar; Blažević, Dalibor; Džambas, Igor.
The Group Technology Concept // Metallurgy, vol.47, no.3 / Ilija Mamuzić, editor(s).
Zagreb : Hrvatsko Metalurško Društvo, 2008. 281-281 (lecture,international peer-review,abstract,scientific).
|
164. Vuković, Aleksandar; Ikonić, Milan; Blažević, Dalibor.
ENTITY ANNOTATION SYSTEM APPLIED IN THE TECHNOLOGICAL CASTING PROCESS // Metallurgy, vol.47, no.3 / Ilija Mamuzić, editor(s).
Zagreb : Hrvatsko Metalurško Društvo, 2008. 281-281 (lecture,international peer-review,abstract,scientific).
|
165. Žic, Samir; Džambas, Igor; Ikonić, Milan.
POSSIBILITIES TO REDUCE COSTS BY USING MATERIALS RESISTANT TO IMPACTS AND ABRASIONPOSSIBILITIES OF POSSIBILITIES OF IMPLEMENTING BIMETALLIC HAMMER CASTINGS IN CRUSHING INDUSTRIES // Metallurgy, vol.47, no.3 / Ilija Mamuzić, editor(s).
Zagreb : Hrvatsko Metalurško Društvo, 2008. 281-281 (lecture,international peer-review,abstract,scientific).
|
|
|
|
|
|
|
| |
Papers in the publishing process
|
| |
1. Drasnar, Petr; Kudlacek; Jan; Kreibich, Viktor; Roskanin, Petr; Vales, Miroslav; Car, Zlatan.
The Tribological Properties of ZN-PTFE Composite Coating. // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici. (2012) (accepted for publication).
|
2. Radelja, Hrvoje; Kršulja, Marko; Šikulec, Leon; Car, Zlatan.
Measurements Planing of Turbo Casing by the Use of AI for Data Clasification. // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici. (2012) (accepted for publication).
|
3. Kuzmanović, Siniša; Barišić, Branimir; Rackov, Milan.
Influence of Thermal Capacity on the Selection of Universal Gear Reducer Size. // Strojarstvo : časopis za teoriju i praksu u strojarstvu. (2011) (accepted for publication).
|
4. Živko-Babić, Jasenka.
Therapeutic factors of metal alloys in fixed prosthodontics. // Stomatološki glasnik Srbije. (2009) (accepted for publication).
|
|
|
|
|
|
|
| |
Plenary/Keynote talks
|
| |
1. Gojić, Mirko; Kožuh, Stjepan; Kosec, Borut; Anžel, Ivan.
Properties and applications of shape memory alloys // Proceedings of 9th Scientific-Research Symposium with International Participation / Muhamedagić, Sulejman, editor(s).
Zenica : Univerzitet u Zenici, Fakultet za metalurgiju i materijale, 2012. 13-23 (plenary/keynote lecture,international peer-review,published,scientific).
|
2. A. T. Voločko; Ilija Mamuzić.
Composite aluminium materials, matrix reinforced by disperse particles, perspective from beginning // Sovremennye metody i tehnologii sozdanija i obrabotki materijalov : kniga 1 : mnogofunkcionaljnye materialy v sovremennoj tehnike, mikro- i nanoelektronike / P. A. Vitjaz ; N. V. Spiridonov, editor(s).
Minsk : Fti Nan, 2008. 81-86 (plenary/keynote lecture,international peer-review,published,scientific).
|
3. Samardžić, Ivan; Kolumbić, Zvonimir; Gojić, Mirko.
Modern high efficiency welding processes in steam boilers production // Proceedings of CIM 2007 : Computer Intergrated Manufacturing and High Speed Machining / Aberle, Eberhard ; Udiljak, Toma ; Ciglar, Damir, editor(s).
Zagreb : Croatian Association of Production Engineering, 2007. 27-36 (plenary/keynote lecture,international peer-review,published).
|
|
|
|
|
|
|
| |
Published invited lectures
|
| |
1. Unkić, Faruk.
TRANSFORMATIONS CHARACTERISTICS OCCURRING IN AUSTEMPERED DUCTILE IRON WITH DUAL MATRIX STRUCTURES // Heat Treatment and Surface Engineering – European Opportunities for Croatian Economy.
27-37 (invited talk,published).
|
2. Mamuzić, Ilija.
9000 years of metallurgy // Zbornik radova, Okrugli sto - Značaj i uloga Metalurškog instituta "Kemal Kapetanović" Zenica u razvoju obrazovnog i privrednog sistema BiH : povodom 50 godina postojanja i rada Metalurškog instituta / Mirsada Oruč, Milenko Rimac, Neira Delić, Faik Čičak, editor(s).
Zenica : Univerzitet u Zenici, Metalurški institut, 2012. 15-24 (invited talk,domestic peer-review,published).
|
3. Plančak, Miroslav; Movrin, Dejan; Car, Zlatan; Dragiša Vilotić; Kacmarcik, Igor; Kršulja, Marko.
BI-Metallic Cold Backward Extrusion – Numerical Simulation with Experimental Verification // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ;, editor(s).
Rijeka : Faculty of Engineering University of Rijeka, 2012. 417-420 (invited talk,international peer-review,published,scientific).
|
4. Zovko Brodarac, Zdenka; Stanić, Davor; Unkić, Faruk.
Investigation of AlSi9MgMn alloy solidification by thermal analysis // Conference Proceedings of 52nd Inetnational Foundry Conference Portorož 2012 / Debelak, M., editor(s).
Ljubljana, Slovenija : Društvo livarjev Slovenije, 2012. 58-59 (invited talk,published,scientific).
|
5. Kršulja, Marko; Cukor, Goran; Car, Zlatan.
Simulation of Product Logistic, Investigation of Facility Layout Capabilities // International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko, editor(s).
Prag : Tisk AS, s.r.o., Jaroměř, 2011. 759-761 (invited talk,international peer-review,published,scientific).
|
6. Unkić, Faruk; Glavaš, Zoran; Veljačić, Emina.
THE INFLUENCE OF SILICON AND BORON ON TENSILE PROPERTIES OF DUCTILE IRON // Conference Proceedings of 51st International Foundry Conference Portorož 2011 / Debelak, Martin, editor(s).
Ljubljana : Društvo livarjev Slovenije, 2011. 1-8 (invited talk,published,scientific).
|
7. Zovko Brodarac, Zdenka; Stanić, Davor; Unkić, Faruk.
Microstructural evaluation of AlSi9Cu3 alloy // Conference proceedings of 51st International Foundry Conference Portorož 2011 / Debelak, Martin, editor(s).
Ljubljana : Društvo livarjev Slovenije, 2011. 74-75 (invited talk,international peer-review,published,scientific).
|
8. Malina, Jadranka; Begić Hadžipašić, Anita.
Stress corrosion cracking induced by hydrogen diffusion in low alloyed structural steels // Zbornik radova 19. Savjetovanje o zaštiti materijala i industrijskom finišu, KORMAT 2010, 340th Event of the European Federation of Corrosion / Stojanović, Ivan, editor(s).
Zagreb : Hrvatsko društvo za zaštitu materijala, 2010. 1-16 (invited talk,domestic peer-review,published,scientific).
|
9. Plančak, Miroslav; Barišić, Branimir; Vilotić, Dragiša; Lužanin, Ognjen.
Radial Stress in Cold Backward Extrusion: Upper Bound and Analytical Solution // Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro, editor(s).
Prag : Tisk AS, s.r.o., Jaroměř, 2010. 14-19 (invited talk,international peer-review,published,scientific).
|
10. Zovko Brodarac, Zdenka; Holjevac Grgurić, Tamara; Unkić, Faruk; Terzić, Katarina.
Influence of microstructural characteristics on mechanical properties of AlSi11Cu2(Fe) alloy // Conference Proceedings of 50th International Foundry Conference / Debelak, Martin, editor(s).
Ljubljana : Društvo livarjev Slovenije, 2010. (invited talk,international peer-review,published,scientific).
|
11. Zovko Brodarac, Zdenka; Unkić, Faruk; Terzić, Katarina.
Influence of the melt treatment on the microstructure and mechanical properties development of the AlSi10Mg alloy // Conference Proceedings of International 49th Foundry Conference Portorož 2009.
Ljubljana : Slovenian Foundrymen Society, 2009. (invited talk,international peer-review,published,scientific).
|
12. Matijević, Božidar; Stupnišek, Mladen.
NOVELTY IN DIFFUSION COATING TECHNOLOGY // EXTENDED ABSTRACTS: 2th INTERNATIONAL CONGERENCE ON HEAT TREATMENT AND SURFACE ENGINEERING OF TOOLS AND DIES / LESKOVŠEK, VOJTEH, editor(s).
LJUBLJANA : SLOVENIAN SOCIETY FOR HEAT TREATMENT, 2008. 81-83 (invited talk,international peer-review,published,scientific).
|
13. Stupnišek, Mladen; Matijević, Božidar.
DIFFUSION CARBIDE COATING APPLICATIONS // ISTMA 2007- 12TH WORLD CONFERENCE.
(invited talk,international peer-review,published,scientific).
|
|
|
|
|
|
|
| |
Scientific conference papers with international peer-review
|
| |
1. Begić Hadžipašić, Anita; Malina, Jadranka; Mitić, Sandra.
Hydrogen embrittlement as consequence of hydrogen diffusion in high-strength low-alloyed structural steels // Proceedings Book of 13th International Foundrymen Conference / Glavaš, Zoran ; Zovko Brodarac, Zdenka ; Dolić, Natalija, editor(s).
Opatija : Metalurški fakultet, 2013. 10-23 (poster,international peer-review,published,scientific).
|
2. Bizjak, Milan; Kožuh, Stjepan; Kosec, Borut; Gojić, Mirko; Karpe, Blaž.
The influence of Ti on the sequence of phase precipitation in rapidly solidified Cu-Fe-Ti alloys // Proceedings Book 13th International Foundrymen Conference / Glavaš, Zoran ; Zovko Brodarac, Zdenka ; Dolić, Natalija, editor(s).
Sisak : University of Zagreb Faculty of Metallurgy, 2013. 24-30 (lecture,international peer-review,published,scientific).
|
3. Dolić, Natalija; Unkić, Faruk; Medved, Jožef; Mrvar, Primož.
QUANTITATIVE ANALYSIS OF MICROSTRUCURAL CONSTITUENTS OF ALLOY EN AW-5083 AT DIFFERENT COOLING RATES // Proceeedings Book 13th International Foundrymne Conference Innovative Foundry Processes and Materials / Glavaš, Zoran ; Zovko Brodarac, Zdenka ; Dolić, Natalija, editor(s).
Sisak : Sveučilište u Zagrebu Metalurški fakultet, 2013. 82-96 (lecture,international peer-review,published,scientific).
|
4. Ivanić, Ivana; Gojić, Mirko; Anžel, Ivan; Kožuh, Stjepan; Rimac, Milenko; Beganović, Omer; Begović, Kemal; Kosec, Borut.
Microstructure and properties of casted CuAlNi and CuAlNiMn shape memory alloys // Proceedings Book 13th International Foundrymen Conference / Glavaš, Zoran ; Zovko Brodarac, Zdenka ; Dolić, Natalija, editor(s).
Sisak : University of Zagreb Faculty of Metallurgy, 2013. 153-162 (lecture,international peer-review,published,scientific).
|
5. Aleksandrov Fabijanić, Tamara; Alar, Željko, Franz, Mladen.
DEVELOPEMENT OF REFERENCE VICKERS HARDNESS BLOCKS BY THE POWDER METALLURGY PROCESS // Proceedings of XX IMEKO World Congress 2012..
2012. 786-790 (poster,international peer-review,published,scientific).
|
6. Begić Hadžipašić, Anita; Malina, Jadranka; Zovko Brodarac, Zdenka.
The resistance of grey and vermicular cast iron to high temperature corrosion at 973 K // Proceedings book of 12th International Foundrymen Conference / Dolić, Natalija ; Glavaš, Zoran ; Zovko Brodarac, Zdenka, editor(s).
Opatija : Metalurški fakultet, 2012. CD-ROM: str. 24-36 (lecture,international peer-review,published,scientific).
|
7. Črnko, Josip.
Crude Steel Production in the Conditions of Economical Crisis in the World // Proceedings Book of 12th International Foundrymen Conference Sustainable Development in Foundry Materials and Technologies / Dolić, Natalija ; Glavaš, Zoran ; Zovko Brodarac, Zdenka, editor(s).
Sisak : Metalurški fakultet Sveučilišta u Zagrebu, 2012. 52-58 (lecture,international peer-review,published,scientific).
|
8. Dolić, Natalija; Malina, Jadranka; Kožuh, Zoran; Garašić, Ivica; Tunić Jozef.
Tensile behaviour of mig welded hydrogenated Al-alloy EN AW-5083 // 8. Europsko savjetovanje Eurojoin 8 : zbornik radova = 8th European Conference : proceedings / Kožuh, Zoran, editor(s).
Zagreb : Hrvatsko društvo za tehniku zavarivanja, 2012. 687-696 (poster,international peer-review,published,scientific).
|
9. Dolić, Natalija; Malina, Jadranka; Zovko Brodarac, Zdenka.
INFLUENCE OF HYDROGEN ON MECHANICAL PROPERTIES OF AS-CAST Al-ALLOY EN AW-5083 // Proceedings of 44th International October Conference on Mining and Metallurgy - IOC 2012 / Kostov, Ana ; Ljubojev, Milenko, editor(s).
Bor : Mining and Metallurgy Institute Bor, 2012. 507-510 (lecture,international peer-review,published,scientific).
|
10. Dolić, Natalija; Unkić, Faruk; Uremović, Josip.
INFLUENCE OF COOLING RATE ON THE MECHANICAL AND MICROSTRUCTURE PROPERTIES OF SEMICONTINUOUS CAST Al-Mg SLAB // Conference Proceedings MATRIB 2012 / Alar, Željko ; Jakovljević, Suzana, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2012. 58-71 (poster,international peer-review,published,scientific).
|
11. Drasnar, Petr: Kudláček, Jan; Roskanin, Petr; Pepelnjak, Tomaž; Car, Zlatan; Vales, M.
Introduction of New Surface Treatment Technologies Into Practice - Zinc Based Composite Coating with PTFE Particles (Zn-PTFE Coating) // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ;, editor(s).
Rijeka : Faculty of Engineering University of Rijeka, 2012. 339-342 (lecture,international peer-review,published,scientific).
|
12. Gojić, Mirko; Kožuh, Stjepan; Anžel, Ivan; Lojen, Gorazd; Ivanić, Ivana; Kosec, Borut.
Microstructure of CuAlNi shape memory alloy after continuous casting // MATRIB 2012 / Željko Alar, Suzana Jakovljević, editor(s).
Zagreb : Croatian Society for Materials and Tribology, 2012. 84-92 (poster,international peer-review,published,scientific).
|
13. Gojić, Mirko; Kožuh, Stjepan; Šavli, Štefan; Nagode, Aleš; Kosec, Borut; Kosec, Ladislav.
Microstructure of heat-resistant austenitic steel after isothermal annealing at 700 °C // Proceedings book of 12th International Foundrymen Conference / Dolić, Natalija ; Glavaš, Zoran ; Zovko Brodarac, Zdenka, editor(s).
Sisak : University of Zagreb Faculty of Metallurgy, 2012. 83-91 (poster,international peer-review,published,scientific).
|
14. Gojić, Mirko; Vrsalović, Ladislav; Kožuh, Stjepan; Ćubela, Diana; Gudić, Senka.
Microstructural Analysis of Ti-Ni Shape Memory Alloy after Corrosion Testing in 0.9 % NaCl Solution // Proceedings of XIV YuCorr International Conference / Pavlović, Miomir ; Panić, Vladimir, editor(s).
Beograd : Udruženje inženjera Srbije za koroziju i zaštitu materijala, 2012. 289-297 (poster,international peer-review,published,scientific).
|
15. Grozdanić, Vladimir; Dolić, Natalija, Mrvar, Primož.
MATHEMATICAL MODEL OF SOLIDIFICATION OF SEMICONTINUOUSLY CAST SLAB OF ALUMINIUM ALLOY EN AW-5083 IN ZONE OF COOLING BY SPRAYING WITH WATER // Proceeding Book of 12th International Foundrymen Conference Sustainable Development in Foundry Materials and Technologies / Dolić, Natalija ; Glavaš, Zoran ; Zovko Brodarac, Zdenka, editor(s).
Sisak : Metalurški fakultet Sisak (Sveučilište u Zagrebu), 2012. 114-124 (poster,international peer-review,published,scientific).
|
16. Grubišić, Željko; Lazić, Ladislav.
Cost-effectiveness Analysis of the Increase of Preheated combustion Air Temperature // Proceedings Book of 12th International Foundrymen Conference Sustainable Development in Foundry Materials and Technologies / Dolić, Natalija ; Glavaš, Zoran ; Zovko Brodarac, Zdenka, editor(s).
Sisak : Metalurški fakultet Sveučilišta u Zagrebu, 2012. 125-134 (poster,international peer-review,published,scientific).
|
17. Jandrlić, Ivan; Rešković, Stoja; Lazić, Ladislav.
The Importance of Emissivity Factor in Thermography Testing of Steel Plasticity // Sustainable Development in Foundry Materials and Technologies / Natalija Dolić, Zoran Glavaš, Zdenka Zovko Brodarac, editor(s).
Sisak : Sveučilište u Zagrebu Metalurški fakultet, Aleja narodnih heroja 3 44103 Sisak, Croatia, 2012. 169-175 (poster,international peer-review,published,scientific).
|
18. Jurjević, Marin; Kršulja, Marko; Katalinić, Branko; Car, Zlatan; Šikulec, Leon.
Automatic Measurement of Rotational Speeds and Lathe Maintenance // Annals & Proceedings of DAAAM International 2012 / Katalinic, Branko, editor(s).
Vienna, Austria : Published by DAAAM International, 2012. 0775-0778 (lecture,international peer-review,published,scientific).
|
19. Kačmarčik, Igor, Štrbac, Branko; Šikulec, Leon.
Analysis of Bulk Metal Forming by UBET – Case Studies // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ;, editor(s).
Rijeka : Faculty of Engineering University of Rijeka, 2012. 357-360 (lecture,international peer-review,published,scientific).
|
20. Karpe, Blaž; Kosec, Borut; Gojić, Mirko; Anžel, Ivan; Kitak, Sonja; Bizjak, Milan.
Mathematical modeling of the melt cooling rate in the melt-spinning process // Proceedings of the 11th International Scientific Conference MMA 2012 / Čosić, Ilija, editor(s).
Novi Sad : University of Novi Sad, Faculty of Technical Sciences, 2012. 447-452 (lecture,international peer-review,published,scientific).
|
21. Kozina, Franjo; Glavaš, Zoran; Unkić, Faruk.
THE ASSESSMENT OF THE MICROSTRUCTURAL FEATURES OF DUCTILE IRON BY USING THERMAL ANALYSIS // MATRIB 2012 / Alar, Željko ; Jakovljević, Suzana, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2012. 140-153 (poster,international peer-review,published,scientific).
|
22. Kožuh, Stjepan; Gojić, Mirko; Ivanić, Ivana; Kosec, Borut.
Microstructure of welded austenitic stainless steel after annealing at 900°C // Zbornik radova ZAVARIVANJE 2012 & IRB 2012 / Lukić, Branislav ; Radojičić, Dragoljub, editor(s).
Beograd : Društvo za unapređivanje zavarivanja u Srbiji, 2012. 1-9 (lecture,international peer-review,published,scientific).
|
23. Kožuh, Stjepan; Gojić, Mirko; Kosec, Borut; Pinotić, Damir; Smolčić, Dražen.
Analysis of weld joint quality and microstructure of duplex stainless steel // Proceedings of the EWT Eurojoin 8 Conference / Kožuh, Zoran, editor(s).
Zagreb : European Federation for Welding, Joining and Cutting & Croatian Welding Society, 2012. 677-685 (lecture,international peer-review,published,scientific).
|
24. Kršulja, Marko; Barišić, Branimir.; Pomenić, Loreta; Car, Zlatan; Šikulec, Leon.
Thin Metal Material TH 415 Composition Testing // 13th International Scientific Conference Automation in Production Planning and Manufacturing / Kuric, Ivan, editor(s).
Žilina : Scientific and Technical Society at the University of Žilina, 2012. 133-139 (lecture,international peer-review,published,scientific).
|
25. Kršulja, Marko; Kuzman; Karl; Plančak, Miroslav; Math Miljenko; Car, Zlatan.
Investigation of Single Point Incremental Forming Process Applied on Thin Sheet Metal // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ;, editor(s).
Rijeka : Faculty of Engineering University of Rijeka, 2012. 583-586 (lecture,international peer-review,published,scientific).
|
26. Kršulja, Marko; , Roškanin, Petr; Kudláček, Jan; Pomenić, Loreta; Car, Zlatan.
Investigation of Coatings Friction Coefficient Used in Production of Deep Drawn Packaging Cans // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ;, editor(s).
Rijeka : Faculty of Engineering University of Rijeka, 2012. 443-446 (lecture,international peer-review,published,scientific).
|
27. Kudláček, Jan; Chabera, Petr; Pepelnjak, Tomaž; Car, Zlatan.
Mathematical Modelling of Surface Grease Deposits // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ;, editor(s).
Rijeka : Faculty of Engineering University of Rijeka, 2012. 335-338 (lecture,international peer-review,published,scientific).
|
28. Lackova, Petra; Hagarova, Maria; Mamuzić, Ilija.
Tests of paintings applied on the KONOX 315 S steel // Proceedings "Corrosion in power industry 2012" / J. Kocich, editor(s).
Košice : Technical University of Košice, Faculty of Metallurgy, 2012. 81-84 (lecture,international peer-review,published,scientific).
|
29. Lazić, Ladislav; Varga, Augustin; Kizek, Jan; Brovkin, Vladimir.
Opportunities for Low Energy Consumption in the Furnaces for Melting of Aluminium Alloys // Proceeding Book of 12th International Foundrymen Conference Sustainable Development in Foundry Materials and Technologies / Dolić, Natalija ; Glavaš, Zoran ; Zovko Brodarac, Zdenka, editor(s).
Sisak : Metalurški fakultet Sveučilišta u Zagrebu, 2012. 226-235 (lecture,international peer-review,published,scientific).
|
30. Malina, Jadranka; Dolić, Natalija; Begić Hadžipašić, Anita.
Hydrogen embrittlement of as-cast AlMg alloy EN AW 5083 // Book of Abstracts EUROCORR 2012 Safer World Through Better Corrosion Control.
Istanbul, 2012. 1-8 (poster,international peer-review,published,scientific).
|
31. Malina, Jadranka; Dolić, Natalija; Unkić, Faruk.
Microstructural aspects of pitting in commercial Al-alloys in as-cast condition // Zbornik radova - 20. Savjetovanje o zaštiti materijala i industrijskom finišu, KORMAT 2012 / Stojanović, Ivan ; Alar, Vesna, editor(s).
Zagreb : Hravatsko društvo za zaštitu materijala, 2012. 93-106 (lecture,international peer-review,published,scientific).
|
32. Marjanović, Tihomir; Glavaš, Zoran; Terzić, Katarina.
THE INFLUENCE OF MICROSTRUCTURAL FEATURES ON THE TENSILE PROPERTIES OF DUCTILE IRON // Sustainable Development in Foundry Materials and Technologies / Dolić, Natalija ; Glavaš, Zoran ; Zovko Brodarac, Zdenka, editor(s).
Sisak : Metalurški fakultet, 2012. 247-258 (poster,international peer-review,published,scientific).
|
33. Matijević; Božidar.
APPLICATION OF LOW TEMPERATURE ALUMINIZING ON HOT WORK TOOL STEELS // HEAT TREATMENT AND SURFACE ENGINEERING- EUROPEAN OPPORTUNITIES FOR CROATIAN ECONOMY / Smoljan, Božo ; Iljkić, Dario, editor(s).
Rijeka : Hrvatsko društvo za toplinsku obradu i inžinjerstvo površina, 2012. 51-56 (lecture,international peer-review,published,scientific).
|
34. Mioč, Boro; Rede, Vera; Mikec, Matija; Ćurković, Lidija.
MICROSTRUCTURE CHANGES OF ALUMINIZED AUSTENITIC STAINLESS STEEL // Interantional Conference on Materials, Tribology, Recycling / Alar, Željko ; Jakovljević, Suzana, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2012. 212-218 (lecture,international peer-review,published,scientific).
|
35. Nagode, Aleš; Klančnik, Grega; Gojić, Mirko; Kosec, Borut; Zorc, Borut; Kosec, Ladislav.
An investigation of the surface damage of hot plates after black oxide coating // Proceedings of the 11th International Scientific Conference MMA 2012 / Čosić, Ilija, editor(s).
Novi Sad : University of Novi Sad, Faculty of Technical Sciences, 2012. 41-44 (lecture,international peer-review,published,scientific).
|
36. Plančak, Miroslav; Vilotić, Dragiša; Car, Zlatan; Movrin, Dejan; Kačmarcik, Igor; Kršulja, Marko.
Forward Extrusion of Bi-metallic Components // Proceedings of 4th International Scientific and Expert Conference of the International TEAM Society / Marija Živić ; Tomislav Galeta, editor(s).
Grafika d.o.o., Osijek : Mechanical Engineering Faculty in Slavonski Brod, Josip Juraj Strossmayer University of Osijek and International TEAM Society, 2012, 2012. 125-128 (lecture,international peer-review,published,scientific).
|
37. Radelja, Hrvoje; Hasković, Damir; Šikulec, Leon; Plančak, Miroslav; Kršulja, Marko; Car, Zlatan.
Concept for online web machine tool control based on open source // Proceedings of 8th International Conference of DAAAM Baltic INDUSTRIAL ENGINEERING / Otto, T., editor(s).
Tallinn : Tallinn University of Technology, 2012. 216-221 (lecture,international peer-review,published,scientific).
|
38. Rađenović, A; Malina, J; Holjevac Grgurić, T.
Thermal analysis of moulding mixture components // Proceedings book of 12th International Foundrymen Conference / Dolić, Natalija ; Glavaš, Zoran ; Zovko Brodarac, Zdenka, editor(s).
Sisak : Faculty of Metallurgy, 2012. 380-385 (poster,international peer-review,published,scientific).
|
39. Rede, Vera; Mioč, Boro; Ćurković, Lidija; Majić Renjo, Marijana.
Synthesis and characterization of pack cemented aluminide coating on stainless steel // 4th International Scientific and Expert Conference "Technique, Education, Agriculture & Management" (TEAM 2012) : proceedings / Živić, Marija ; Galeta, Tomislav, editor(s).
Slavonski Brod : Strojarski fakultet, 2012. 107-109 (poster,international peer-review,published,scientific).
|
40. Schauperl, Zdravko; Kožuh, Zoran; Kralj, Slobodan; Šnajdar, Mateja; Glogović, Zlatko.
Structural transformation of steel induced by application of oxyfuel gas cutting using acetylene and propane/butane mixture // 12th International Foundrymen conference, Sustainable Development in Foundry Materials and Technologies / Dolić, Natalija ; Glavaš, Zoran ; Zovko Brodarac, Zdenka, editor(s).
Sisak : Faculty of Metallurgy, University of Zagreb, 2012. 407-418 (lecture,international peer-review,published,scientific).
|
41. Slokar, Ljerka; Matković, Tanja; Matković, Prosper.
Microstructural characterization of Ti-based alloys // International Conference MATRIB 2012 / Alar, Željko ; Jakovljević, Suzana, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2012. 282-289 (poster,international peer-review,published,scientific).
|
42. Šikulec, Leon; Hasković, Damir; Radelja, Hrvoje.
Virtual Model and Production Plant Simulation for Optimization of Powder Coating Process // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ;, editor(s).
Rijeka : Faculty of Engineering University of Rijeka, 2012. 579-582 (lecture,international peer-review,published,scientific).
|
43. Tonković, Zdenko; Perić, Mato; Bakić, Ante; Garašić, Ivica; Boras Ivanka; Rodić, Alan; Švaić, Srećko.
Numerical and Experimental Modeling of a T-joint Fillet Welding Process // Proceedings Of the 11th International Conference on Quantitative InfraRed Thermogrphy / Secretary of QIRT2012 (ur.)..
Naples, 2012. (lecture,international peer-review,published,scientific).
|
44. Vojkovský, Karel; Kudláček, Jan; Pakosta, Michal; Kršulja, Marko.
PCN2 – Cyclic Loading Pulsator, For Research on Hydrogen Embrittlement in Surface Treatment Technology // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ;, editor(s).
Rijeka : Faculty of Engineering University of Rijeka, 2012. 439-442 (lecture,international peer-review,published,scientific).
|
45. Zovko Brodarac, Zdenka, Kalauz, Vinko, Unkić, Faruk.
Influence of the cooling rate on microstructure development of AlSi11Cu2(Fe) alloy // International Conference MATRIB 2012 / Alar, Željko ; Jakovljević, Suzana, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2012. 31-41 (poster,international peer-review,published,scientific).
|
46. Zovko Brodarac, Zdenka, Prerad, Dario, Dekanić, Branislava.
Influence of chemical composition on microstructural and mechanical properties of secondary Al-Si alloy // Proceedings book: Sustainable Development in Foundry Materials and Technologies / Dolić, Natalija, Glavaš, Zoran, Zovko Brodarac, Zdenka, editor(s).
Sisak : Metalurški fakultet, 2012. 471-482 (lecture,international peer-review,published,scientific).
|
47. Živković, D.; Holjevac Grgurić, Tamara; Ćubela, D.; Kostov, A.; Gojić, Mirko; Kožuh, Stjepan.
Thermodynamics of Cu-Al-(Ag, Au) shape memory alloys // 44th International October Conference on Mining and Matallurgy : proceedings / Kostov, Ana ; Ljubojev, Milenko, editor(s).
Bor : Tehnički fakultet Bor ; Institut za rudarstvo i metalurgiju, 2012. 457-460 (lecture,international peer-review,published,scientific).
|
48. Barišić, Branimir; Jurjević, Marin; Plančak, Miroslav.
Comparison of Device for Measuring Surface Roughness // International Conference „Automation in Production Planning and Manufacturing“ / Kuric, Ivan, editor(s).
Žilina : University of Zilina, Zilina 2011. 9-14 (lecture,international peer-review,published,scientific).
|
49. Barišić, Branimir; Kuzmanović, Siniša; Rackov, Milan.
Effect of External Loads at the Output Shaft End of Universal Worm Gear Reductor on its Thermal Capacity // International Scientific Conference ''Research and Development of Mechanical Elements and Systems'' / Miltenović, Vojislav, editor(s).
Niš : SVEN, Niš, University of Niš, Mechanical Engineering Faculty, 2011. 535-540 (lecture,international peer-review,published,scientific).
|
50. Begić Hadžipašić, Anita; Hadžipašić, Hasan; Vrbanjac, Stjepan.
The influence of medium and microstructure on corrosion behavior of dual phase steels // Zbornik radova: Međunarodno savjetovanje o materijalima , tribologiji, recikliranju / Schauperl, Zdravko ; Šolić, Sanja, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2011. 11-22 (poster,international peer-review,published,scientific).
|
51. Bogović, Iva - Nicol; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan.
Digitizing system ATOS - measuring turbo compressor housing // Annals of DAAAM for 2011 & PROCEEDINGS of the 22nd International DAAAM Symposium / Katalinić, Branko, editor(s).
Vienna : DAAAM International Vienna, 2011. 1367-1368 (lecture,international peer-review,published,scientific).
|
52. Božić, Denis; Kršulja, Marko; Barišić, Branimir; Matković, Romeo; Lazanja, Matej.
Investigation of an a Quallity Measurement Plan for an Alternator Carrier on a CMM Machine // Quality and Innovation in Engineering and Management / Sorin Popescu, Stelian Brad & Daniela Popescu, editor(s).
Cluj-Napoca : Editura U.T.Press, 2011. 27-30 (lecture,international peer-review,published,scientific).
|
53. Despot, Veselka; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan.
Radioscopic measurement on fuel filter support: inspection for health of material // Annals of DAAAM for 2011 & PROCEEDINGS of the 22nd International DAAAM Symposium / Katalinić, Branko, editor(s).
Vienna : DAAAM International Vienna, 2011. 1359-1360 (lecture,international peer-review,published,scientific).
|
54. Dolić, Natalija; Unkić, Faruk; Sudec, Igor.
INFLUENCE OF HOMOGENIZATION TIME ON MICROSTRUCTURAL AND TENSILE PROPERTIES OF ALUMINUM ALLOY EN AW-5083 // Abstract Book of International conference on materials, tribology, recycling MATRIB 2011 / Schauperl, Zdravko ; Šolić, Sanja, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2011. 76-89 (lecture,international peer-review,published,scientific).
|
55. Drasnar, Petr; Kudlaček, Jan; Kreibich, Viktor; Roskanin, Petr; Pakosta, Michal; Vales, Miroslav; Car, Zlatan.
The Tribological Properties of Zn-PTFE Composite Coating // International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko, editor(s).
Prag : Tisk AS, s.r.o., Jaroměř, 2011. 142-146 (lecture,international peer-review,published,scientific).
|
56. Drozd, Kamil; Horsinka, Jaromir; Kliber, Jori, Černi, Martin; Ostroushko, Dmytro; Mamuzić, Ilija.
Study of development of strain in plane strain compression test // Metal 2011 / Kliber, Jiri, editor(s).
Hradec nad Moravici : Tanger, 2011. 55-62 (lecture,international peer-review,published,scientific).
|
57. Éles, Imre; Szalay, Tibor; Barišić, Branimir.
Adjustable Positioning Using Deformation of V-Blocks // International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko, editor(s).
Prag : Tisk AS, s.r.o., Jaroměř, 2011. 183-187 (lecture,international peer-review,published,scientific).
|
58. Gigović-Gekić, Almaida; Oruč, Mirsada; Gojić, Mirko.
Determination of the content of delta ferrite in austenitic stainless steel Nitronic 60 // 15th International Research/Expert Conference, TMT 2011 Proceedings / Ekinović, Sabahudin ; Vivancos, Joan ; Tacer, Emin, editor(s).
Zenica : Faculty of Mechanical Engineering in Zenica, Escola Tecnica Superior D`Enginyeria Industrial de Barcelona, Mechanica Universitat Politecnica de Catalunya, Bahcesehir University Instanbul, 2011. 157-160 (lecture,international peer-review,published,scientific).
|
59. Gojić, Mirko; Kožuh, Stjepan; Vrsalović, Ladislav; Gudić, Senka; Kliškić, Maja.
Surface morphology of Cu-Al-Ni shape memory alloy after corrosion testing in 0.5 M NaCl solution // XIII YUCORR International Conference Proceedings / Pavlović, Miomir ; Lačnjevac, Časlav, editor(s).
Beograd : Savez inženjera Srbije za zaštitu materijala, 2011. 384-391 (poster,international peer-review,published,scientific).
|
60. Gojić, Mirko; Vrsalović, Ladislav; Kožuh, Stjepan; Gudić, Senka; Kliškić, Maja; Matulić, Marko.
Corrosion and microstructural properties of AISI 316L stainless steel after welding // IOC 2011 / Marković, Desimir ; Živković, Dragana ; Nestorović, Svetlana, editor(s).
Bor : University of Belgrade-Technical Faculty in Bor, 2011. 541-544 (poster,international peer-review,published,scientific).
|
61. Gregov, Goran; Kršulja, Marko; Barišić, Branimir; Lukovics, Imrich.
A Study of Plastic Processing and Tool Design for a Polypropylene Product // 8th International Tools Conference, Procedings ITC 2011 / Composite autors, editor(s).
Zlin, Czech Republic : Tomas Bata University in Zlin, Faculty of Technology, 2011. 156-161 (lecture,international peer-review,published,scientific).
|
62. Gregov, Goran; Žic, Samir; Kršulja, Marko; Barišić, Branimir; Kudlaček, Jan.
Some Considerations on a Molding Simulation for a Polyethylene Product // International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko, editor(s).
Prag : Tisk AS, s.r.o., Jaroměř, 2011. 790-793 (lecture,international peer-review,published,scientific).
|
63. Hodak, Marko; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan.
Flatness of Mechanical Interface of Housing Filter: Comparing Methods // Annals of DAAAM for 2011 & PROCEEDINGS of the 22nd International DAAAM Symposium / Katalinić, Branko, editor(s).
Vienna : DAAAM International Vienna, 2011. 1381-1382 (lecture,international peer-review,published,scientific).
|
64. Holjevac-Grgurić, Tamara; Rek, Vesna; Brnardić, Ivan.
THE EFFECT OF SEBS BLOCK COPOLYMER ON MECHANICAL AND TRIBOLOGICAL PROPERTIES OF POLYPROPYLENE // MATRIB 2011, International conference on materials, tribology, recycling / Zdravko Schauperl, Sanja Šolić, editor(s).
Zagreb : HDMT Hrvatsko društvo za materijale i tribologiju, 2011. (poster,international peer-review,published,scientific).
|
65. Hršak, Damir; Lazić Ladislav.
Meaning of Ceramics Raw Materials by Holistic Approach to Environment // Proceedings of IXth International Conference "Preparation of Ceramic Materials" / Kuffa, T. ; Plešingerova, B., editor(s).
Košice : Technical University of Kosice, 2011. 74-76 (lecture,international peer-review,published,scientific).
|
66. Jurjević, Marin; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan.
Suitable Devices for Measuring Roughness on Oil Filter Housing // Annals of DAAAM for 2011 & PROCEEDINGS of the 22nd International DAAAM Symposium / Katalinić, Branko, editor(s).
Vienna : DAAAM International Vienna, 2011. 1351-1352 (lecture,international peer-review,published,scientific).
|
67. Lazanja, Matej; Barišić, Branimir; Car, Zlatan.
Considerations on the use of Ballbar System in Accuracy Assessment of the Triaxial CNC Machine Tool // International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko, editor(s).
Prag : Tisk AS, s.r.o., Jaroměř, 2011. 762-764 (lecture,international peer-review,published,scientific).
|
68. Lazić, Ladislav; Lukač, Ladislav; Lukač, Peter.
Influence of the Reburning on NOx Reduction // Teplotehnika i energetika v metallurgii / Veličko, A. G., editor(s).
Dniepropetrovsk : Novaja ideologija, 2011. 231-239 (lecture,international peer-review,published,scientific).
|
69. Malina, Jadranka; Begić Hadžipašić, Anita; Otmačić Ćurković, Helena.
The influence of hydrogen on mechanical properties and impedance of TRIP steel // Zbornik radova: Međunarodno savjetovanje o materijalima, tribologiji, recikliranju / Schauperl, Zdravko ; Šolić, Sanja, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2011. 277-289 (poster,international peer-review,published,scientific).
|
70. Matijević, Božidar; Kumić, Ivan; Alar, Vesna.
Modification of the hot work tool steel surface by different thermochemical treatments // Proceedings of 19th IFHTSE Congress.
Glasgow, Scotland : IFHTSE, 2011. (lecture,international peer-review,published,scientific).
|
71. Matijević, Božidar; Kumić, Ivan; Belić, Tomislav.
THE LOW TEMPERATURE ALUMINISING KINETICS OF HOT-WORK TOOL STEELS // Proceedings of 3th International Conference on "Heat Treatment and Surface Engineering of Tools and Dies" / Schneider, Reinhold, editor(s).
Leoben : The Austrian Societyfor Metallurgy and Materials, 2011. 99-107 (lecture,international peer-review,published,scientific).
|
72. Matijević, Božidar; Pedišić, Ljiljana.
THE INFLUENCE OF QUENCHANT COMPOSITION ON THE COOLING RATE // Proceedings of European Conference of Heat Treatment 2011- "Quality in Heat Treatment" / Schneider, Reinhold, editor(s).
Leoben : ASMET, 2011. 50-55 (lecture,international peer-review,published,scientific).
|
73. Pinotić, Damir; Kožuh, Stjepan; Gojić, Mirko.
Non-destructive testing of welded duplex stainless steel 2205 // The conference proceedings of 6th International scientific-professional conference SBW 2011 / Samardžić, Ivan ; Despotović, Božo, editor(s).
Slavonski Brod : Strojarski fakultet u Slavonskom Brodu, 2011. 165-170 (lecture,international peer-review,published,scientific).
|
74. Radelja, Hrvoje; Kršulja, Marko; Šikulec, Leon; Car, Zlatan.
Measurements Data Analysis and Defect Classification Using NN // Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko, editor(s).
Prag : Tisk AS, s.r.o., Jaroměř, 2011. 770-772 (lecture,international peer-review,published,scientific).
|
75. Rešković, Stoja.
Influence of niobium on the degree precipitation in the thermo mechanical treatment // Proceedings of the 13th International Conference on Production Engineering CIM 2011 / Abele, E., editor(s).
Zagreb : Hrvatska udruga proizvaodnog strojarstva, 2011. 203-206 (poster,international peer-review,published,scientific).
|
76. Slokar, Ljerka; Matković, Tanja; Matković, Prosper.
Alloying and heat treatment effects on the microstructure and hardness of biomedical titanium alloys // Proceedings of International Conference MATRIB 2011 / Schauperl, Zdravko ; Šolić, Sanja, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2011. 450-456 (poster,international peer-review,published,scientific).
|
77. Stojaković, Ana; Glavaš, Zoran; Unkić, Faruk; Terzić, Katarina.
THE EFFECTS OF CASTING SECTION SIZE AND METALLIC CHARGE MATERIALS ON MICROSTRUCTURE OF DUCTILE IRON // MATRIB 2011 / Schauperl, Zdravko ; Šolić, Sanja, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2011. 457-470 (poster,international peer-review,published,scientific).
|
78. Šikulec, Leon; Radelja, Hrvoje; Kršulja, Marko; Car, Zlatan.
Comparison in Production Planning of the Classical Method and RL Advanced Algorithms // Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko, editor(s).
Prag : Tisk AS, s.r.o., Jaroměř, 2011. 778-780 (lecture,international peer-review,published,scientific).
|
79. Štrkalj, Anita; Glavaš, Zoran; Brnardić, Ivan.
APPLICATION OF FOUNDRY WASTE FOR ADSORPTION OF HEXAVALENT CHROMIUM // Towards Sustainable Technologies / Koprivanac, Natalija ; Kušić, Hrvoje ; Lončarić Božić, Ana, editor(s).
Zagreb : Faculty of Chemical Engineering and Technology, University of Zagreb, 2011. 189-195 (poster,international peer-review,published,scientific).
|
80. Štrkalj, Anita; Rađenović, Ankica; Malina, Jadranka.
ADSORPTION OF MIXTURE Ni (II) AND Cr (VI) IONS ON ANODE DUST – THERMODYNAMIC STUDY // MATRIB 2011 / Schauperl, Zdravko ; Šolić, Sanja, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2011. 488-494 (poster,international peer-review,published,scientific).
|
81. Vaszi, Zsolt, Švab, Julius; Varga, Augustin; Lazić, Ladislav.
Adiabatic Simulations of Oxy-Burners using Non-Premixed Combustion Model // Toplotehnika i energetika v metallurgii / Veličko, A. G., editor(s).
Dnjepropetrovsk : Novaja ideologija, 2011. 240-251 (lecture,international peer-review,published,scientific).
|
82. Zenzerović, Paolo; Car, Zlatan.
Vehicle Beam Light Assistant System // Annals of DAAAM for 2011 & PROCEEDINGS of the 22nd International DAAAM Symposium / Katalinić, Branko, editor(s).
Vienna : DAAAM International Vienna, 2011. 1653-1654 (lecture,international peer-review,published,scientific).
|
83. Zenzerović, Paolo; Macuka, Daniel; Krišković, Domagoj.
Remote Laboratory for Automation System Design // Annals of DAAAM for 2011 & PROCEEDINGS of the 22nd International DAAAM Symposium / Katalinić, Branko, editor(s).
Vienna : DAAAM International Vienna, 2011. 1655-1656 (lecture,international peer-review,published,scientific).
|
84. Zovko Brodarac, Zdenka; Dolić, Natalija; Unkić, Faruk.
Influence of chemical composition on microstructure development of EN AB AlSi9Cu3 alloy // IOC 2011 Proceedings / Marković, Desimir ; Živković, Dragana ; Nestorović, Svetlana, editor(s).
Bor : University of Belgrade Technical Faculty in Bor, 2011. 683-686 (lecture,international peer-review,published,scientific).
|
85. Zovko Brodarac, Zdenka; Holjevac Grgurić, Tamara; Kalauz, Vinko; Unkić, Faruk.
Thermodynamic of AlSi11Cu2(Fe) alloy solidification // MATRIB 2011 / Schauperl, Zdravko ; Šolić, Sanja, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2011. 566-574 (poster,international peer-review,published,scientific).
|
86. Žic, Samir; Žic, Jasmina; Meštrović, Tomislav.
Improvement of coal fired power plant's performance by use of wear resistant components // 9th international conference on advanced manufacturing systems and technology, AMST '11 / Kuljanić, Elso, editor(s).
Udine : Faculty of Engineering, Rijeka, Croatia, 2011. 519-527 (lecture,international peer-review,published,scientific).
|
87. Živković, D.; Holjevac Grgurić, Tamara; Ćubela, D.; Manasijević, D.; Balanović, L.; Mitovski, A.
Thermodynamic Study and Characterization of Some Alloys in Ga-Sn-Zn System // Ninth international conference on Advanced manufacturing systems and technology (AMST 11) : proceedings / Kuljanić, Elso, editor(s).
Rijeka : Faculty of Engineering, 2011. 599-609 (lecture,international peer-review,published,scientific).
|
88. Begić Hadžipašić, Anita; Malina, Jadranka; Nižnik, Štefan.
The influence of microstructure on hydrogen diffusion and embrittlement of dual phase steel // Zbornik radova: Međunarodno savjetovanje o materijalima, tribologiji, recikliranju / Schauperl, Zdravko ; Šnajdar, Mateja, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2010. 24-33 (poster,international peer-review,published,scientific).
|
89. Car, Zlatan; Dario, Ogrizović; Branimir, Barišić, Katalinić, Branko.
Introduction of Scientific Cloud Concept for Industry Application // 14th Asia Pacific Symposium on Intelligent and Evolutionary Systems : proceedings / Ohkura, Kazuhiro, editor(s).
Hiroshima : Hiroshima University, 2010. 213-220 (lecture,international peer-review,published,scientific).
|
90. Czeslaw, Janusz; Rucki, Miroslaw; Barisic, Branimir.
Examinations of Characteristics of Pneumatic Follower for Profile Measurement // Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro, editor(s).
Prag : Tisk AS, s.r.o., Jaroměř, 2010. 197-202 (lecture,international peer-review,published,scientific).
|
91. Ćurčija, Dušan; Mamuzić, Ilija, Brušak, M.
The lubricating layer modelling and simulating at band dressing // MATRIB 2010 / Grilec, Krešimir ; Marić, Gojko, editor(s).
Vela Luka : Hrvatsko društvo za materijale i tribologiju, 2010. 1-12 (lecture,international peer-review,published,scientific).
|
92. Dražić, Ivan; Mujaković, Nermina; Barišić, Branimir.
The Numerical Approximations of the Solution for the Piston Problem With Viscous Compressible Micropolar Fluid // Proceedings of International Conference on Innovative Technologies (IN-TECH) / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro, editor(s).
Prag : Tisk AS, s.r.o., Jaroměř, 2010. 375-384 (lecture,international peer-review,published,scientific).
|
93. Glavaš, Zoran; Unkić, Faruk; Terzić, Katarina.
THE ANALYSIS OF DEFECTS ON THE DUCTILE IRON CASTINGS // MATRIB 2010 / Schauperl, Zdravko ; Šnajdar, Mateja, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2010. 115-122 (poster,international peer-review,published,scientific).
|
94. Gojić, Mirko; Kožuh, Stjepan; Holjevac-Grgurić, Tamara; Kneissl, Albert C.; Anžel, Ivan; Lojen, Gorazd; Bizjak, Milan; Kosec, Borut.
DSC and SEM analysis of the Cu-Al-Ni shape memory alloys // IOC 2010 / Ivanov, Svetlana ; Živković, Dragana, editor(s).
Bor : University of Belgrade Technical Faculty in Bor, 2010. 158-161 (poster,international peer-review,published,scientific).
|
95. Gojić, Mirko; Kožuh, Stjepan; Kosec, Ladislav; Holjevac-Grgurić, Tamara.
The effect of solution heat treatment on microstructure, fracture resistance and hardness of AISI 310S steel // MATRIB 2010 / Schauperl, Zdravko ; Šnajdar, Mateja, editor(s).
Zagreb : Croatian Society for Materials and Tribology, 2010. 123-129 (poster,international peer-review,published,scientific).
|
96. Holjevac Grgurić, Tamara; Marenić, Marina; Rek, Vesna; Matković, Tanja; Brnardić, Ivan.
Modification of polypropylene/polystyrene blends with SEBS-g-MA block copolymer // MATRIB 2010 Materijali, trenje, trošenje : zbornik radova = Proceedings / Schauperl, Zdravko ; Šnajdar, Mateja, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2010. 149-156 (poster,international peer-review,published,scientific).
|
97. Kudláček, Jan; Chaber, Petr; Barišić, Branimir.
New Possibilities of Degreasing Process Evaluation // Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro, editor(s).
Prag : Tisk AS, s.r.o., Jaroměř, 2010. 624-631 (lecture,international peer-review,published,scientific).
|
98. Malina, Jadranka; Begić Hadžipašić, Anita; Nižnik, Štefan.
Electrochemical corrosion and hydrogen diffusivity in dual-phase steel // 2nd International Conference Corrosion and Material Protection (Proceedings), EFC Event No. 322 / SVUOM.Praha, editor(s).
Prag : SVUOM.Praha, 2010. CD-ROM: P036 (poster,international peer-review,published,scientific).
|
99. Malina, Jadranka; Rađenović, Ankica; Štrkalj, Anita.
ADSORPTION KINETICS OF CATIONIC DYE ON BLAST FURNACE SLUDGE // Međunarodno savjetovanje o materijalima, tribologiji i recikliranju / Schauperl, Zdravko ; Šnajdar, Mateja, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2010. 281-288 (poster,international peer-review,published,scientific).
|
100. Matijević, Božidar.
A LOW TEMPERATURE ALUMINIZING TREATMENT OF HOT WORK TOOL STEEL // PROCEEDINGS OF THE 18th IFHTSE CONGRESS / Cristina Fleury Pereira Leitao, editor(s).
Rio de Janeiro : ASSOCIACAO BRASILEIRA DE METALURGIA, MATERIAIS E MINERACAO, 2010. 5204-5209 (lecture,international peer-review,published,scientific).
|
101. Pilvousek, Tomáš; Tatíček, František; Roleček, Lubomír; Barišić, Branimir.
The Effect of Strain Rate on the Propreties and Microstructure of the DC 06 Steel // Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro, editor(s).
Prag : Tisk AS, s.r.o., Jaroměř, 2010. 628-637 (lecture,international peer-review,published,scientific).
|
102. Plančak, Miroslav; Vilotić, Dragiša; Barišić, Branimir.
FE Simulation of Inhomogeneity in Tube Hydroforming // Proceeding of 13th International Scientific Conference Mechanical Engineering 2010 / Roland, Janco, editor(s).
Bratislava : Slovak University of Technology in Bratislava, 2010. 102-110 (lecture,international peer-review,published,scientific).
|
103. Radošević, Marko; Katalinić, Branko; Cesarec, Paulina; Štimac, Sanjin; Barišić, Branimir.
Making device for torque initiation which is appliedin torquewrench calibration // Annals of DAAAM for 2010 & Proceedings / Katalinić, Branko, editor(s).
Vienna, Austria : DAAAM International Vienna 2010, 2010. 1521-1522 (lecture,international peer-review,published,scientific).
|
104. Rešković, Stoja; Lazić, Ladislav; Črnko, Josip.
Technological and Economical Analysis of Replacement of the Gas-Fired Furnaces with Induction Heating // Proceeding of VI. International Scientific Conference Refractories, Furnaces and Thermal Insulations / Varga, Augustin ; Vadasz, Pavol, editor(s).
Košice : Technical University of Košice, 2010. 55-60 (lecture,international peer-review,published,scientific).
|
105. Slokar, Ljerka; Matković, Tanja; Matković, Prosper; Kosec, Borut.
Microstructural and mechanical characteristics of biomedical Ti-Cr alloys with 5 and 10 at.% of cobalt // Conference Proceedings MATRIB 2010 / Schauperl, Zdravko ; Šnajdar, Mateja, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2010. 402-408 (lecture,international peer-review,published,scientific).
|
106. Szalay, Tibor; Székely, Ferenc; Barišić, Branimir.
Some Experimental Results in Moulding of Glass Lenses // International Conference on Innovative Technologies IN-TECH 2010 / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro, editor(s).
Prag : Tisk AS, s.r.o., Jaroměř, 2010. 453-462 (lecture,international peer-review,published,scientific).
|
107. Štimac, Sanjin; Katalinić, Branko; Cesarec, Paulina; Radošević, Marko; Barišić, Branimir.
Measurement of the closing force on the medical bottles // Annals of DAAAM for 2010 & Proceedings / Katalinić, Branko, editor(s).
Vienna, Austria : DAAAM International Vienna 2010, 2010. 1523-1524 (lecture,international peer-review,published,scientific).
|
108. Štrkalj, Anita; Rađenović, Ankica; Malina, Jadranka.
ADSORPTION KINETICS OF Cr (VI) IONS FROM BINARY MIXTURE OF IONS IN AQUEOUS SOLUTION // Međunarodno savjetovanje o materijalima, tribologiji i recikliranju / Schauperl, Zdravko ; Šnajdar, Mateja, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2010. 481-486 (poster,international peer-review,published,scientific).
|
109. Štrkalj, Anita; Rađenović, Ankica; Malina, Jadranka.
DISTRIBUTION COEFFICIENT OF Cr (VI) AND Ni (II) IONS REMOVAL FROM AQUEOUS SOLUTION BY THE ANODE DUST // TMT 2010 Proceedings / S. Ekinović, Y. Uctug, J. Vivancos, editor(s).
Zenica : University of Zenica, Faculty of Mehanical Engineering, 2010. 93-95 (poster,international peer-review,published,scientific).
|
110. Štrkalj, Anita; Rađenović, Ankica; Malina, Jadranka.
THE EFFECT OF ANODE DUST CONCENTRATION ON REMOVAL EFFICIENCY OF Cr (VI) AND Ni (II) IONS FROM AQUEOUS SOLUTION BY ADSORPTION // TMT 2010 Proceedings / S. Ekinović, Y. Uctug, J. Vivancos, editor(s).
Zenica : University of Zenica, Faculty of Mehanical Engineering, 2010. 109-111 (poster,international peer-review,published,scientific).
|
111. Štrkalj, Anita; Rađenović, Ankica; Malina, Jadranka.
Effect of pH value on adsorption capacity of carbon anode dust for Cr (VI) removal from aqueous solution // Proceeding of International Conference on Innovative Technologies IN-TECH / Jan Kudlaček, Branimir Barišuć, Xavier Velay, Kazuhiro Ohkura, editor(s).
Prague : Tisak AS, s.r.o., Jaromer, 2010. 43-46 (poster,international peer-review,published,scientific).
|
112. Tahir Sofilić, Alenka Rastovčan-Mioč, Mario Ćosić, Vesna Merle, Boro Mioč, Una Sofilić.
EAF Steel Slag Application Posibilities in Croatian Asphalt Mixture Production // CHEMICAL ENGINEERING TRANSACTIONS, Volume 19, 2010 / Simberto Senni Buratti, editor(s).
Firenca, Italy : AIDIC Servizi S.r.l.,, 2010. 109-115 (poster,international peer-review,published,scientific).
|
113. Zovko Brodarac, Zdenka; Unkić, Faruk; Bižić, Vesna.
Influence of the pouring temperature on the castability of AlSi11Cu2(Fe) alloy // MATRIB 2010 : zbornik radova / Schauperl, Zdravko ; Šnajdar, Mateja, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2010. 529-539 (poster,international peer-review,published,scientific).
|
114. Barišić, Branimir; Mamuzić, Ilija; Čep, Robert.
Production Supported by Combination of Different Software in Sheet Metal Forming // Management of Technology – Step to Sustainable Production / Čosić, Predrag, editor(s).
Zagreb, 2009. (lecture,international peer-review,published,scientific).
|
115. Ćurčija, D.; Mamuzić, Ilija; Buršak, M.
Modelling the lubricant layer at strip dressing // MATRIB 2009 / Grilec, Krešimir ; Marić, Gojko, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2009. 1-12 (lecture,international peer-review,published,scientific).
|
116. Ćurčija, Dušan.
Lubricant film modelling and band dressing upon influence of surface roughness // Stručna izdanja Hrvatskog društva za goriva i maziva = Croatian society for fuels and lubricants Symposium proceedings / Legiša, Ivo, editor(s).
Rovinj, 2009. C9-C9 (lecture,international peer-review,published,scientific).
|
117. Dolić, Natalija; Begić Hadžipašić, Anita; Malina, Jadranka.
Electrochemical properties of aluminium alloy EN AW-5083 // Zbornik 14. Savjetovanja o materijalima, tehnologijama, trenju i trošenju / Grilec, Krešimir ; Marić, Gojko, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2009. 65-73 (poster,international peer-review,published,scientific).
|
118. Glavaš, Zoran; Unkić, Faruk; Terzić, Katarina.
Determining the content of carbon and silicon in the primary melt for the production of ductile iron using computer-aided thermal analysis // Zbornik 14. Savjetovanja o materijalima, tehnologijama, trenju i trošenju / Grilec, Krešimir ; Marić, Gojko, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2009. 74-79 (poster,international peer-review,published,scientific).
|
119. Gojić, Mirko; Kožuh, Stjepan; Čondić, Benjamin.
Properties and microstructure of CrMoNb steel after gas welding // MATRIB 2009 / Grilec, Krešimir ; Marić, Gojko, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2009. 476-485 (poster,international peer-review,published,scientific).
|
120. Gojić, Mirko; Kožuh, Stjepan; Pinotić, Damir; Čondić, Benjamin.
Non-destructive testing of welded join from low-alloyed CrMoNb steel // The conference proceedings of 5th International scientific-professional conference SBW 2009 / Samardžić, Ivan, editor(s).
Slavonski Brod : Strojarski fakultet u Slavonskom Brodu, 2009. 303-308 (poster,international peer-review,published,scientific).
|
121. Grozdanić, Vladimir.
Numerical simulation of the solidification of steel casting of relatively complex geometry by means of implicit and explicit finite difference method // Proceedings book of 12th International Scientific Conference on Production Engineering CIM 2009 / Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir, editor(s).
Zagreb : Croatian Association of Production Engineering, 2009. 89-95 (lecture,international peer-review,published,scientific).
|
122. Kliber, Jiri; Drozd, Kamil; Mamuzić, Ilija.
Stress-strain behaviour and softening in manganese twip steel tested in thermal-mechanical simulator // METAL 2009 / Kliber, Jiri, editor(s).
Hradec nad Moravici : TANGER, 2009. 19-21 (lecture,international peer-review,published,scientific).
|
123. Kliber, Jiri; Mamuzić, Ilija.
Torsion plastomer results used for determination of degree of softening in steel // Proceedings of International Conference on Progresivnyje technologii plasticeskoj deformaciji.
Moskva : MISIS Moskva, OOOTrumpf, 2009. 445-451 (lecture,international peer-review,published,scientific).
|
124. Lojen, Gorazd; Kneissl, Albert C.; Gojić, Mirko; Rudolf, Rebeka; Čolić, Miodrag; Anžel, Ivan.
Continuous casting of Cu-Al-Ni shape memory alloys // Conference Proceedings of International 49th Foundry Conference Portorož / Debelak, Martin, editor(s).
Ljubljana : Slovenian Foundrymen Society, 2009. (lecture,international peer-review,published,scientific).
|
125. Malina, Jadranka; Begić Hadžipašić, Anita; Malina, Marijan.
The influence of DP steel microstructure on hydrogen diffusivity // 4. Zavarivanje u pomorstvu / Kožuh, Zoran, editor(s).
Bol, Brač : Hrvatsko društvo za tehniku zavarivanja, 2009. 173-182 (lecture,international peer-review,published,scientific).
|
126. Malina, Jadranka; Čelebić, Asja; Klaić, Boris; Svetličić, Vesna; Begić Hadžipašić, Anita.
Electrolyte influence on the surface characteristics of dental cobalt-chromium alloys // EUROCORR 2009, Corrosion from the Nanoscale to the Plant.
Nica, Francuska, 2009. CD-ROM: SS 3-P-8310 (poster,international peer-review,published,scientific).
|
127. Malina, Jadranka; Rađenović, Ankica; Štrkalj, Anita; Baglama, Martina.
The influence of carbon in spent foundry sand on phenol adsorption from water solutions // International Conference MATRIB 2009, Abstract book / Krešimir Grilec, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2009. 461-468 (poster,international peer-review,published,scientific).
|
128. Matijević, Božidar; Ćurković, Lidija; Rede, Vera.
Characterization and determination of Ni-P coating sputtering rate // PROCEEDINGS / Smoljan, Božo ; Matijević, Božidar, editor(s).
ZAGREB : HRVATSKO DRUŠTVO ZA TOPLINSKU OBRADU I INŽENJERSTVO POVRŠINA, 2009. 233-240 (poster,international peer-review,published,scientific).
|
129. Pedišić, Ljiljana; Matijević, Božidar; Munić, Jasminka.
THE INFLUENCE OF QUENCHANTS COMPOSITION ON THE COOLING RATE // PROCEEDINGS / Smoljan, Božo ; Matijević, Božidar, editor(s).
ZAGREB : HRVATSKO DRUŠTVO ZA TOPLINSKU OBRADU I INŽENJERSTVO POVRŠINA, 2009. 125-134 (poster,international peer-review,published,scientific).
|
130. Rađenović, Ankica; Štrkalj, Anita; Malina, Jadranka; Bolanča, Tomislav.
Leaching of carbon anode dust into aqueous solution // International Conference MATRIB 2009, Abstract book / Krešimir Grilec, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2009. 149-155 (poster,international peer-review,published,scientific).
|
131. Slokar, Ljerka; Matković, Tanja; Matković, Prosper.
Niobium effect on microstructure and properties of as cast Ti-Cr biomedical alloys // Proceedings of International PhD Foundry Conference / Horaček, Milan, editor(s).
Brno : Faculty of Mechanical Engineering, 2009. (lecture,international peer-review,published,scientific).
|
132. Štaba, Jan; Mamuzić, Ilija; Bernathova, Izabela.
Influence of deformation on degradation zinc coated layer // Korozia uložnych zariadeni 2009 : Zbornik / Halama, Maroš ; Ševičkova, Jarmila, editor(s).
Košice : Technical Universyti of Košice, 2009. 124-132 (lecture,international peer-review,published,scientific).
|
133. Vitez, Ivan; Krumes, Dragomir; Pecić, Vladimir.
DISTRIBUTION STEEL GRADES ON HR EN 10020 // Quality 2009, Proceedings / Brdarević, Safet, editor(s).
Neum, BiH : Univerzitet u Zenici, Fakultet za metalurgiju i materijale, 2009. 935-940 (lecture,international peer-review,published,scientific).
|
134. Vitez, Ivan; Pecić, Vladimir; Vujčić, Branimir.
URVEY DAMAGES RAILWAY RAILS BY WELDING AND RESURFACING DEFECTS // Zbornik radova, ROBOTIZACIJA I AUTOMATIZACIJA U ZAVARIVANJU I OSTALIM TEHNIKAMA / Samardžić, Ivan, editor(s).
Slavonski Brod : Strojarski fakultet u Slavonskom Brodu, 2009. 333-341 (poster,international peer-review,published,scientific).
|
135. Zovko Brodarac, Zdenka; Mrvar, Primož; Unkić, Faruk; Medved, Jožef.
Solidification and Microstructure Characteristics of the AlMg9 alloy // Proceedings of International PhD Foundry Conference / Horaček, Milan, editor(s).
Brno : Faculty of Mechanical Engineering, 2009. (lecture,international peer-review,published,scientific).
|
136. Zovko Brodarac, Zdenka; Unkić, Faruk; Dekanić, Branislava.
The influence of the melt treatment on the microstructure characteristics of the AlSi10Mg alloy // Zbornik radova 14. Savjetovanja o materijalima, tehnologijama, trenju i trošenju / Grilec, Krešimir ; Marić, Gojko, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2009. 426-435 (poster,international peer-review,published,scientific).
|
137. Aksenova, Sergey; Kliberb, Jiří; Fabíkc, Richard; Mamuzić, Ilija.
An Experimental And Computer Study Of The Influence Of Deformation Conditions On Microalloyed Strip Steel Microstructure Evolution // TANGER, 2008 / Kliber, Jiri, editor(s).
2008. 1-7 (lecture,international peer-review,published,scientific).
|
138. Buršak, Marian; Mamuzić, Ilija; Bernatova, Izabela.
Analysis of reason of the failure of boiler pipeline auxiliary injektor // Material v inžinierskej praxi 2008 / Maria Mihalikova, Jan Štaba, editor(s).
Košice : tehnical University of Košice, Faculty of Metallurgy, 2008. 155-158 (lecture,international peer-review,published,scientific).
|
139. Ćurčija, Dušan.
Modeling of lubrication layer by seamless tubes rolling // MATRIB 2008 Abstracts book / Grilec, Krešimir ; Marić, Gojko ; Jakovljević, Suzana, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2008. 35-50 (lecture,international peer-review,published,scientific).
|
140. Dolić, Natalija; Markotić, Ante; Unkić, Faruk.
Structural and Physical Homogeneity of Direct-Chill Cast Ingots of Aluminium Alloy EN AW-5083 // / Grilec, Krešimir ; Marić, Gojko ; Jakovljević, Suzana, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2008. 67-78 (poster,international peer-review,published,scientific).
|
141. Glavaš, Zoran; Unkić, Faruk; Terzić, Katarina.
The Prediction of the As-cast Ductile Iron Impact Toughness by Using Artificial Neutral Network and Chemical Composition // 13. savjetovanje o materijalima, tehnologijama, trenju i trošenju (MATRIB 2008) : zbornik sažetaka = abstracts book / Grilec, Krešimir ; Marić, Gojko ; Jakovljević, Suzana, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2008. 83-89 (poster,international peer-review,published,scientific).
|
142. Gojić, Mirko; Kožuh, Stjepan; Kosec, Ladislav; Pinotić, Damir.
Properties of austenitic steel AISI 321 after welding with TIG procedure // Zbornik radova VII Naučno/stručni simpozij sa međunarodnim učešćem / Begovac, Fuad, editor(s).
Zenica : Univerzitet u Zenici, Fakultet za metalurgiju i materijale, 2008. 295-300 (lecture,international peer-review,published,scientific).
|
143. Gojić, Mirko; Kožuh, Stjepan; Laćman, Drago.
Fractographic analysis of austenitic stainless steel AISI 321 after welding // MATRIB 2008 / Grilec, Krešimir ; Marić, Gojko ; Jakovljević, Suzana, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2008. 90-97 (poster,international peer-review,published,scientific).
|
144. Gojić, Mirko; Kožuh, Stjepan; Lazić, Siniša.
Properties of pipes after high– frequency induction welding // Proceedings of 40th INTERNATIONAL OCTOBER CONFERENCE on Mining and Metallurgy / Stanojlović, Rodoljub ; Sokolović, Jovica, editor(s).
Bor : Technical Faculty Bor, University of Belgrade, 2008. 481-486 (lecture,international peer-review,published,scientific).
|
145. Gojić, Mirko; Matković, Prosper; Matković, Tanja; Anžel, Ivan; Kneissl, A. C.; Bizjak, Milan; Kosec, Borut.
Characterization of Cu-Al-Ni shape memory alloys // Zbornik radova VII Naučno/stručni simpozij sa međunarodnim učešćem / Begovac, Fuad, editor(s).
Zenica : Univerzitet u Zenici, Fakultet za metalurgiju i materijale, 2008. 225-229 (lecture,international peer-review,published,scientific).
|
146. Krumes, Dragomir; Kladarić, Ivica; Vitez, Ivan.
Mechanical properties of boronizing steels as repercussion of boron phases // Materials and technology, 2nd International Conference on Heat Treatment and Surface Engineering of Tools and Dies / Leskovšek, Vojteh ; Smoljan, Božo ; Jager, Heimo ; Jenko, Monika, editor(s).
Bled, Slovenija : Institute of Metals and Technology, 2008. 112-113 (lecture,international peer-review,published,scientific).
|
147. Lazić, Ladislav; Gubinsky, Vladimir I.; Brovkin, Vladimir L.; Kijashko, Nicolay A.; Boganova, Maria V.
Investigation of Energy Saving Possibilities in The Pusher Furnace with Two-Sided Heating // 8th Europian Conference on Industrial Furnaces and Boilers / Reis, Albino ; Ward, John ; Leuckel, Wolfgang, editor(s).
Rio Tinto : CENERTEC - Centro de Energia e Tecnologia, Lda., 2008. (poster,international peer-review,published,scientific).
|
148. Lazić, Ladislav; Varga, Augustin; Herout, Marijan; Jelić, Predrag; Kizek, Jan.
Finite Element Analysis of Heating Rate and Thermal Stress // APLIKACIA EXPERIMETALNYCH A NUMERICKYCH METOD V MECHANIKE TEKUTIN / Holeša, Ferdinand ; Honner, Karol ; Jandačka, Jozef ; Labaj, Jan ; Malcho, Milan ; Saga, Milan, editor(s).
Žilina : Žilinska univerziteta, 2008. 139-144 (lecture,international peer-review,published,scientific).
|
149. Rađenović, Ankica; Malina, Jadranka; Štrkalj, Anita.
Adsorption of nickel ions on the blast furnace sludge // International Conference MATRIB 2008, Abstracts book / Krešimir Grilec, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2008. 277-282 (poster,international peer-review,published,scientific).
|
150. Rađenović, Ankica; Malina, Jadranka; Štrkalj, Anita.
Distribution coefficient of Ni2+ ions removing from aqueous solutions by blast furnace sludge // International Conference MATRIB 2008, Abstracts book / Krešimir Grilec, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2008. 283-288 (poster,international peer-review,published,scientific).
|
151. Slokar, Ljerka; Matković, Tanja; Matković, Prosper.
Niobium and cobalt influence on the microstructure and hardness of Ti-Cr alloys // MATRIB 2008 / Grilec, Krešimir ; Marić, Gojko ; Jakovljević, Suzana, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2008. 325-331 (poster,international peer-review,published,scientific).
|
152. Stupnišek, Mladen; Matijević, Božidar; Šolić, Sanja.
Diffusion of Carbon in Steels // The 4th International Conference on Diffusion in Solids and Liquids (DSL2008).
Barcelona, 2008. DLS0099 (poster,international peer-review,published,scientific).
|
153. Vitez, Ivan; Krumes, Dragomir; Pecić, Vladimir; Oruč, Mirsada; Madunić, Božo.
Grades and designations of structural steels by new European standard // VII Naučno/stručni simpozij sa međunarodnim učešćem, Metalni i nemetalni materijali - proizvodnja - osobine - primjena / Begovac, Fuad, editor(s).
Zenica : Univerzitet u Zenici, Fakultet za metalurgiju i materijale, 2008. 161-161 (lecture,international peer-review,published,scientific).
|
154. Barišić, Branimir; Car, Zlatan; Nastran Miha.
Numerical Strategy for Ust 13 Sheet Metal DVD Holder Production // 6th International Conference on Industrial Tools and Materials Processing Technologies / Kuzman, Karl, editor(s).
Celje : TECOS, 2007. 337-343 (lecture,international peer-review,published,scientific).
|
155. Dolić, Natalija; Markotić, Anto; Unkić, Faruk; Prgin, Jere; Terzić, Katarina.
Influence of homogenization time on microstructural properties of Al-alloy EN AW-5083 // Materials, Tribology, Processing - MATRIB 2007 / Grilec, Krešimir, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2007. 13 (poster,international peer-review,published,scientific).
|
156. Gajdzica, Tomáš; Aksenov, Sergey; Kliber, Jiří; Svider, Radim; Mamuzić, Ilija.
The influence of heating-up in term of material preparation for rolling of searched marks Cr-Mo steels // METAL 2007 / Kliber, Jiri, editor(s).
Hradec nad Moravici : TANGER, 2007. 149 (lecture,international peer-review,published,scientific).
|
157. Gajdzica, Tomáš; Kliber, Jiří; Žáček, Ondřej; Mamuzić, Ilija.
The cold rolling of trip steel after thermomechanical treatment // METAL 2007 / Kliber, Jiri, editor(s).
Hradec nad Moravici : TANGER, 2007. 148 (lecture,international peer-review,published,scientific).
|
158. Gojić, Mirko; Kožuh, Stjepan; Kosec, Borut.
The effect of post-weld heat treatment on microstructure of AISI 316L steel // Proceedings of the IIW International Conference "WELDING&MATERIALS", Technical, Economic and Ecological Aspects / Kožuh, Zoran, editor(s).
Zagreb : Croatian Welding Society, 2007. 765-773 (poster,international peer-review,published,scientific).
|
159. Gojić, Mirko; Lazić, Ladislav; Pinotić, Damir; Kožuh, Stjepan; Slokar, Ljerka; Šašo, Božidar.
Thermal analysis of austenitic stainless steel during welding // MATRIB 2007 / Grilec, Krešimir, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2007. 79-85 (poster,international peer-review,published,scientific).
|
160. Grozdanić, Vladimir.
3-D Modeling of Solidification of Pilger Roll // Computer Integrated Manufacturing and High Speed Machining / Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir, editor(s).
Zagreb : Croatian Association of Production Engineering, 2007. 151-156 (lecture,international peer-review,published,scientific).
|
161. Hršak, Damir; Sučik, Gabriel; Nemie, Eduard.
THE CHARACTERIZATION OF SERPENTINITE FROM LJESKOVAC LOCALITY // Proceedings of VIIth International Conference PREPARATION OF CERAMIC MATERIALS / Plešingerova, Beatrice ; Kuffa, Tarzicius, editor(s).
Košice, Slovačka : Technical University of Košice, 2007. 55-57 (lecture,international peer-review,published,scientific).
|
162. Kožuh, Stjepan; Gojić, Mirko; Mandić, Zoran.
Mechanical and corrosion properties of welded stainless steel AISI 316L // The 4th International scientific-professional conference "COST EFFECTIVE APPLICATION OF WELDING PROCESSES AND WELDING RELATED TECHNIQUES IN MANUFACTURING OF CONSTRUCTION AND PRODUCTS" / Samardžić, Ivan, editor(s).
Slavonski Brod : Strojarski fakultet u Slavonskom Brodu, 2007. 127-134 (poster,international peer-review,published,scientific).
|
163. Kožuh, Stjepan; Gojić, Mirko, Tehovnik, Franc.
Microstructure of welded austenitic stainless steel AISI 316L after post-weld heat treatment // MATRIB 2007 / Grilec, Krešimir, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2007. 305-312 (poster,international peer-review,published,scientific).
|
164. Lazić, Ladislav; Jelić, Predrag; Brovkin, Vladimir; Veljača, Vedran.
Improving the Control and Efficiency of the Heating Process // Proceedings of the International Scientific Conference on Technology Systems Operation '07 : Technology Systems Operation : TSO07 / Hloch, Sergej et al., editor(s).
Prešov : Technical University of Košice, Faculty of Manufacturing Technologies, 2007. 309-311 (international peer-review,published,scientific).
|
165. Malina, Jadranka; Malina, Marijan; Vručinić, Goran; Begić Hadžipašić, Anita.
Resistance to HIC and SSC of TM-Rolled Fine Grain Structural Steel // Conference Report of The European Corrosion Congress 2007 (EUROCORR 2007) : Progress by Corrosion Control ; u: Corrosion Engineering, Science and Technology 43 (2008) (1).
2007. Paper No. 1321 ; 1-5 (poster,international peer-review,published,scientific).
|
166. Malina, Jadranka; Rađenović, Ankica; Nikolić, Đurđica.
Blast furnace sludge as adsorbent for organic dye // International Conference MATRIB 2007 / Grilec, Krešimir, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2007. 23, CD - medij: str. 133-139 (poster,international peer-review,published,scientific).
|
167. Malina, Jadranka; Vručinić, Goran; Malina, Marijan.
Evaluation of welded TMCP steel for resistance to HIC and SSC // Proceedings of IIW International Conference: Welding & Materials, Tehnical, Economic and Ecological Aspects / Kožuh, Zoran, editor(s).
Zagreb : Hrvatska društvo za tehniku zavarivanja, 2007. 537-546 (lecture,international peer-review,published,scientific).
|
168. Rađenović, Ankica; Malina, Jadranka; Matijašić, Gordana.
Chemical and mineralogical characterization of blast furnace sludge as metallurgical waste // International Conference MATRIB 2007 / Grilec, Krešimir, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2007. 30, CD - medij: str. 180 - 184 (poster,international peer-review,published,scientific).
|
169. Rađenović, Ankica; Malina, Jadranka; Štrkalj, Anita.
Adsorption of organic acids on different carbon materials // International Conference MATRIB 2007 / Grilec, Krešimir, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2007. 31, CD - medij: str. 185-189 (lecture,international peer-review,published,scientific).
|
170. Slokar, Ljerka; Matković, Tanja; Matković, Prosper.
Analysis of Structure and Corrosion Behaviour of Ternary Titanium Alloys with Cobalt and Chromium // Proceedings of MATRIB 2007 / Krešimir Grilec, editor(s).
Zagreb : HDMT, 2007. 206-211 (poster,international peer-review,published,scientific).
|
171. Stoja Rešković.
HARDNESS TEST FOR MEASUREMENT OF FRACTURE TOUGHNES OF BRITTLE MATERIALS // International Conference MATRIB 2007 ABSTRACTS BOOK / Krešimir Grilec, editor(s).
Zagreb : Croation Socientu for Materials and Tribology, 2007. 56-56 (lecture,international peer-review,published,scientific).
|
172. Terzić, Katarina; Glavaš, Zoran; Unkić, Faruk.
Influence of nodule count on microstructure characteristics and impact toughness of spheroidal graphite cast iron // Materials, Tribology, Processing - MATRIB 2007 / Grilec, Krešimir, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2007. 241-247 (poster,international peer-review,published,scientific).
|
173. Vitez, Ivan; Oruč, Mirsada; Begovac, Fuad.
The contribution to the designation of cast irons by european standards // 6th International Scientific Conference RIM 2007, Development and modernization of production / Karabegović, Isak ; Jurković, Milan ; Doleček, Vlatko, editor(s).
Plitvička Jezera : Univerzitet u Bihaću, Tehnički fakultet, 2007. A75, 1-6 (lecture,international peer-review,published,scientific).
|
|
|
|
|
|
|
| |
Other refereed conference papers
|
| |
1. Štrkalj, Anita; Babić, Stjepan.
BIOLOGICAL WASTEWATER TREATMENT IN THE FOUNDRY LIPOVICA d.o.o. // Proceedings Book 13th International Foundrymen Conference / Glavaš, Zoran ; Zovko Brodarac, Zdenka ; Dolić, Natalija, editor(s).
Sisak : University of Zagreb Faculty of Metallurgy, 2013. 415-421 (poster,international peer-review,published,expert).
|
2. Gojsević Marić, Gordana; Žveglič, Damjan; Dikić, Branko; Terzić, Katarina; Unkić, Faruk.
INFLUENCE OF WALL THICKNESS ON PROPERTIES OF DUCTILE IRON INTENDED FOR AUSTEMPERING // Sustainable Development in Foundry Materials and Technologies / Dolić, Natalija ; Glavaš, Zoran ; Zovko Brodarac, Zdenka, editor(s).
Sisak : Metalurški fakultet, 2012. 92-106 (lecture,international peer-review,published,expert).
|
3. Karpe, Blaž; Kosec, Borut; Bizjak, Milan; Markoli, Boštjan; Gojić, Mirko; Anžel, Ivan.
Determination of convective variables in free jet melt-spinning process // Proceedings of 9th Scientific-Research Symposium with International Participation / Muhamedagić, Sulejman, editor(s).
Zenica : Univerzitet u Zenici, Fakultet za metalurgiju i materijale, 2012. 45-52 (poster,international peer-review,published,expert).
|
4. Živec, Martina; Štrkalj, Anita; Babić, Stjepan.
WASTE WATER TREATMENT IN THE FOUNDRY LIPOVICA d.o.o. // Proceedings book of 12th International Foundrymen Conference / Dolić, Natalija ; Glavaš, Zoran ; Zovko Brodarac, Zdenka, editor(s).
Sisak : University of Zagreb Faculty of Metallurgy, 2012. 496-503 (poster,international peer-review,published,expert).
|
5. Ducman, Vilma; Mladenovič, Ana; Netinger, Ivanka, Bjegović, Dubravka; Jelčić-Rukavina, Marija.
EUREKA E!4166 FIRECON– FIRE RESISTANT CONCRETE MADE WITH SLAG FROM THE STEEL INDUSTRY // EMAMB 2011 - 13th Euroseminar on microscopy applied to building materials / Alenka Mauko, Tadeja Kosec, Tinkara Kopar, Nina Gartner, editor(s).
Ljubljana : Slovenian National Building and Civil Engineering Institute, 2011. 27-28 (international peer-review,published).
|
6. Madunić, Božo; Vitez, Ivan.
Procedures for testing heat pipelines // Zbornik radova 7. skup o prirodnom plinu, toplini i vodi / Klarić, Štefanija ; Kozak, Dražan ; Samardžić, Ivan ; Stoić, Antun ; Stojšić, Josip, editor(s).
Osijek : HEP Plin Osijek, Strojarski fakultet u Slavonskom brodu, HEP Toplinarstvo Osijek, Vodovod Osijek, 2009. (lecture,domestic peer-review,published,scientific).
|
7. Slokar, Ljerka; Matković, Tanja; Matković, Prosper.
Influence of chromium content on structure and mechanical properties of Ti-10Co-xCr alloys // Zbornik radova 14. Savjetovanja o materijalima, tehnologijama, trenju i trošenju / Grilec, Krešimir ; Marić, Gojko, editor(s).
Zagreb : Hrvatsko društvo za materijale i tribologiju, 2009. 172-178 (poster,international peer-review,published).
|
8. Žmak, Irena; Filetin, Tomislav; Hren, Smiljan.
Modeling the tensile strength of ductile cast iron by artificial neural networks // Proceedings Book 9th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet u Sisku, 2009. 1-7 (lecture,domestic peer-review,published,scientific).
|
9. Jelić, Predrag; Lazić, Ladislav; Črnko, Josip.
Choice possibilities of the mould material in aluminate cement clinker production // Development of Foundry Management and Technology / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2008. 407-412 (poster,domestic peer-review,published,scientific).
|
10. Kizek, Jan; Balog, P.; Varga, Augustin; Lazić, Ladislav.
Heat exchange problem in charge bed // Trudy XV Meždinarodnoy konferencii Teplotehnika i energetika v metallurgii / Veličko, A. G., editor(s).
Dnepropetrovsk : Novaja ideologija, 2008. 275-278 (lecture,domestic peer-review,published,scientific).
|
11. Kundak, Mijo; Lazić, Ladislav; Čulig, Željko; Brovkin, Vladimir.
Adaptation Of The Furnace Combustion Process At Fuel Exchange // Proceedings of the 8th International Foundrymen Conference Development of Foundry Management and TechnologyProceedings / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2008. 413-419 (poster,domestic peer-review,published,scientific).
|
12. Lazić, Ladislav; Varga, Augustin; Brovkin, Vladimir; Kizek, Jan.
Impact of the load structural defects on the allowed heating rate in reheating furnaces // Trudy XV Meždinarodnoy konferencii Teplotehnika i energetika v metallurgii / Veličko, A. G., editor(s).
Dnepropetrovsk : Novaja ideologija, 2008. 279-280 (lecture,domestic peer-review,published,scientific).
|
13. Pastor, M.; Budayova, M.; Varga, Augustin; Lazić, Ladislav.
Production of fluid combustibles by biomass gasifying // Trudy XV Meždinarodnoy konferencii Teplotehnika i energetika v metallurgii / Veličko, A. G., editor(s).
Dnepropetrovsk : Novaja ideologija, 2008. 281-282 (lecture,domestic peer-review,published,scientific).
|
14. Varga, Augustin; Lazić, Ladislav; Seman, J.
Influence of fill powder on scale making by steel reheating // Trudy XV Meždinarodnoy konferencii Teplotehnika i energetika v metallurgii / Veličko, A. G., editor(s).
Dnepropetrovsk : Novaja ideologija, 2008. 283-285 (lecture,domestic peer-review,published,scientific).
|
|
|
|
|
|
|
| |
Non-refereed conference paper
|
| |
1. Ivanić, Ivana; Gojić, Mirko; Kožuh, Stjepan; Rimac, Milenko; Beganović, Omer; Begović, Kemal; Ćubela, Dijana.
Development of Cu shape memory alloys // Zbornik radova TECHNO-EDUCA 2012 / Petković, Darko, editor(s).
Zenica : Centar za inovativnost i poduzetništvo Univerziteta u Zenici, 2012. 82-87 (poster,published,expert).
|
2. Unkić, Faruk; Gojsević-Marić, Gordana; Žveglić, Damjan; Dikić, Branko.
TRANSFORMATIONS CHARACTERISTICS OF DUAL MATRIX STRUCTURES ADI // Proceedings of 52nd International Foundry Conference / Debelak, Martin, editor(s).
Ljubljana : Društvo Livarjev Slovenije, 2012. (lecture,published,scientific).
|
3. Begić Hadžipašić, Anita; Malina, Jadranka; Nižnik, Štefan; Culjaga, Ivančica.
The influence of microstructure on hydrogen diffusion and impedance of IF-steel // Proceedings book of 11th International foundrymen conference / Unkić, Faruk, editor(s).
Opatija : Metalurški fakultet, 2011. CD-ROM: 25-2011, str. 192-204 (poster,published,scientific).
|
4. Brlić, Tin; Rešković, Stoja; Pinotić, Damir.
Ultrasonic Control of Heat Exchanger // PROCEEDINGS BOOK of 11th INTERNATIONAL FOUNDRYMEN CONFERENCE Foundry Industry – Significance and Future Challenges / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet Sveučilišta u Zagrebu, 2011. 205-215 (poster,published,expert).
|
5. Brnardić, Ivan; Holjevac-Grgurić, Tamara; Fresl, Vladimir.
Characterization of Additives in Foundry Industry // 11th International Foundrymen Conference: proceedings book / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2011. 216-226 (poster,published,scientific).
|
6. Dolić, Natalija; Mahmutović, Almir; Mrvar Primož, Medved Jožef; Unkić Faruk.
NUMERICAL SIMULATION OF SOLIDIFICATION AND MICROSTRUCTURE DEVELOPMENT OF SEMICONTINUOUS CAST SLAB OF ALUMINIUM ALLOY EN AW-5083 // Proceeding Book 11th International Foundrymen Conference Foundry Industry – Significance and Future Challenges / prof. dr. sc. faruk Unkić, editor(s).
Sisak : Sveučilište u Zagrebu Metalurški fakultet, 2011. 259-270 (lecture,published,scientific).
|
7. Dolić, Natalija; Mahmutović, Almir; Mrvar, Primož; Medved, Jožef; Unkić, Faruk.
NUMERICAL SIMULATION OF SOLIDIFICATION AND MICROSTRUCTURE DEVELOPMENT OF SEMICONTINUOUS CAST SLAB OF ALUMINIUM ALLOY EN AW-5083 // Proceedings book of 11th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2011. 259-270 (poster,published).
|
8. Gigović-Gekić, Almaida; Oruč, Mirsada; Gojić, Mirko.
Heat resistance testing of austenitic stainless steel NITRONIC 60 // Proceedings Book 11th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Sveučilište u Zagrebu, Metalurški fakultet, 2011. 95-101 (poster,published,scientific).
|
9. Gojić, Mirko; Kožuh, Stjepan; Matković, Prosper.
Casting and characterization of CuAlNi shape memory alloy // Proceedings Book 11th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Faculty of Metallurgy, University of Zagreb, 2011. 271-281 (poster,published,scientific).
|
10. Grozdanić, Vladimir.
MATHEMATICAL MODEL OF SLAB HEATING // Proceedings book of 11th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2011. 282-293 (poster,published,scientific).
|
11. Grozdanić, Vladimir.
MODELLING OF THE SOLIDIFICATION OF PILGER ROLL // Proceedings book of 11th International Foundryman Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2011. 294-308 (poster,published,scientific).
|
12. Ivanić, Ivana; Rešković, Stoja; Holjevac-Grgurić, Tamara; Križanić, Rade.
Determination of Phase Transformation of Bainit Steel Microalloyed with Niobium // PROCEEDINGS BOOK of 11th INTERNATIONAL FOUNDRYMEN CONFERENCE Foundry Industry – Significance and Future Challenges / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet Sveučilišta u Zagrebu, 2011. 309-318 (poster,published,scientific).
|
13. Jaić, Tomislav; Rešković, Stoja; Pinotić, Damir.
Application of Radiographic Testing of Welded Connection on Heat Exchanger // PROCEEDINGS BOOK of 11th INTERNATIONAL FOUNDRYMEN CONFERENCE Foundry Industry – Significance and Future Challenges / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet Sveučilišta u Zagrebu, 2011. 319-328 (poster,published,expert).
|
14. Jandrlić, Ivan; Rešković, Stoja; Lazić, Ladislav; Pinotić, Damir.
Application of Endoscopic methods of Controlling Pipes // PROCEEDINGS BOOK of 11th INTERNATIONAL FOUNDRYMEN CONFERENCE Foundry Industry – Significance and Future Challenges / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet Sveučilišta u Zagrebu, 2011. 329-335 (poster,published,expert).
|
15. Netinger, Ivanka; Bjegović, Dubravka; Jelčić-Rukavina, Marija; Serdar, Marijana.
Application of steel slag as an aggregate in concrete // Zbornik radova IV. susreta Hrvatskog društva za mehaniku / Marija Živić, editor(s).
Slavonski Brod, 2011. 105-112 (published).
|
16. Radoš, Martina; Unkić, Faruk; Holjevac Grgurić, Tamara.
INVESTIGATION OF GREEN SAND MIXTURE QUALITY IN PRODUCTION OF GRAY IRON CASTINGS // Proceedings book of 11th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2011. 361-367 (poster,published,scientific).
|
17. Rupčić, Tomislav; Glavaš, Zoran; Unkić, Faruk.
THE INFLUENCE OF MICROSTRUCTURAL FEATURES ON THE TOUGHNESS OF DUCTILE IRON // Proceedings book of 11th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2011. 368-377 (poster,published,scientific).
|
18. Sofilić, Tahir; Asi, Ibrahim M.; Ćosić, Mario; Sofilić, Una.
Utilization of steel slag as alternative aggregate in asphalt wearing cours // Proceedings book of the 11th International foundrymen conference Foundry Industry – Significance and Future Challenges / Unkić, Faruk, editor(s).
Sisak : Faculty of Metallurgy Sisak, University of Zagreb, 2011. 378-389 (poster,published,scientific).
|
19. Štrkalj, Anita; Rađenović, Ankica; Malina, Jadranka.
USE OF THE WASTE STEEL SHOT AS A POTENTIAL ADSORBENT // Proceedings book of 11th International Foundrymen Conference / Faruk Unkić, editor(s).
Sisak : Metalurški fakultet, 2011. 390-396 (poster,published,scientific).
|
20. Zovko Brodarac, Zdenka; Dekanić, Branislava; Unkić, Faruk; Terzić, Katarina.
MACRO- AND MICROSTRUCTURAL INVESTIGATION OF AlSi9Cu3(Fe) ALLOY // Proceedings book of 11th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2011. 404-415 (poster,published,scientific).
|
21. Avdušinović, Hasan; Beroš, Ana; Unkić, Faruk.
Analysis of the fractured surface of austempered ductile iron castings samples for different isothermal times // Proceedings book of 10 th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2010. 11-2010 (lecture,published,scientific).
|
22. Brnardić, Ivan; Štefanić, Ivan; Huskić, Miroslav; Holjevac-Grgurić, Tamara.
Modification of montmorillonite by amino acids: Preparation and characterization // 10th International Foundrymen Conference : proceedings / Unkić, Faruk, editor(s).
sisak : Metalurški fakultet, 2010. 1-7 (poster,published,scientific).
|
23. Dolić, Natalija; Mahmutović, Almir; Markotić, Anto; Medved, Jožef; Mrvar, Primož; Unkić, Faruk.
Influence of Cooling rates on Temperatures of the Phase Changes and Microstructutres of Aluminium Alloy EN AW-5083 // Proceedings book of 10th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2010. 18-2010 (lecture,published,scientific).
|
24. Gojić, Mirko; Kožuh, Stjepan; Šašo, Božidar; Kosec, Ladislav.
SEM analysis of heat-resistant stainless steel with 2.27% Si annealed at 600°C // Proceedings Book of 10th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Sveučilište u Zagrebu Metalurški fakultet, 2010. 46-2010 (poster,published,expert).
|
25. Kožuh, Stjepan; Gojić, Mirko; Lamut, Jakob.
The composition of slag in production of stainless steel // Proceedings Book of 10th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Sveučilište u Zagrebu Metalurški fakultet, 2010. 50-2010 (poster,published,expert).
|
26. Malina, Jadranka; Zeljko, Snježana; Begić Hadžipašić, Anita; Unkić, Faruk; Nižnik, Štefan.
Investigation of chromium addition on microstructure of gray cast iron for enameling // Proceedings book of 10th International foundrymen conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2010. CD-ROM: 53-2010-str. 1-13 (poster,published,scientific).
|
27. Stanić, Davor; Zovko Brodarac, Zdenka; Unkić, Faruk.
Development of Support Compressor Prototype // Proceedings book of 10th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2010. 16-2010 (lecture,published,scientific).
|
28. Štrkalj, Anita; Rađenović, Ankica; Malina, Jadranka.
Use of steel shot for removal of Cr (VI) ions from aqueous solutions // Proceedings book of 10th International foundrymen conference / Faruk Unkić, editor(s).
Sisak : Metalurški fakultet, 2010. (lecture,published,scientific).
|
29. Terzić, Katarina; Glavaš, Zoran; Unkić, Faruk.
The Influence of Phosphorus content on the Hardness of Gray Cast Iron // Proceedings book of 10th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2010. 56-2010 (poster,published,expert).
|
30. Unkić, Faruk; Glavaš, Zoran; Terzić, Katarina.
The influence of nodule count and temperature on the toughness of ferritic ductile iron // Proceedings book of 10th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2010. 04-2010 (lecture,published,scientific).
|
31. Zovko Brodarac, Zdenka; Stanić, Davor; Unkić, Faruk.
Microstructural and Mechanical Properties of AlSi8Cu3 Alloy // Proceedings book of 10th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2010. 17-2010 (lecture,published,scientific).
|
32. Črnko, Josip.
Scientific Investigation in the Field of Metal Material Heating in Croatia // Proceedings book of 9th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet Sisak, 2009. 27-30 (lecture,published,scientific).
|
33. Durman, Aleksandar; Lazić, Ladislav.
The History of the Iron is the History of Sisak // Proceedings book of 9th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet Sisak, 2009. 1-1 (poster,published).
|
34. Glavaš, Zoran; Unkić, Faruk; Martišković, Josip.
The influence of preconditioning on microstructure and properties of gray cast irons // Proceedings book of 9th International foundrymen conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2009. 05-2009 (lecture,published).
|
35. Gojić, Mirko; Matković, Prosper; Matković, Tanja; Kneissl, A. C.; Anžel, Ivan; Lojen, Gorazd; Bizjak, Milan; Kosec, Borut.
The properties of shape memory alloys CuAlNi after continuous casting // Proceedings Book of 9th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2009. 34-2009 (poster,published,scientific).
|
36. Jandrlić, Ivan; Rešković, Stoja; Terzić, Katarina.
Metallographic Analysis of Defects in Weld of Weld Pipes // Proceedings book of 9th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet Sisak, 2009. 36-41 (poster,published,expert).
|
37. Kizek, J.; Varga, A.; Lunkin, V.; Lazić, Ladislav.
Thermodynamic Assessment of the Possibility of Reducing the Gas Presure // Proceedings of International Scientific Conference Monuments of Old Metallurgy as Heritage of European Culture / Kieloch, Marian, editor(s).
Czestochowa : Drukarnia Garmond, 2009. 78-87 (lecture,published,scientific).
|
38. Kožuh, Stjepan; Gojić, Mirko; Herout, Maja.
Properties of seam pipes from St. 37.2 steel // Proceedings Book of 9th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2009. 38-2009 (lecture,published,expert).
|
39. Lazić, Ladislav; Durman, Aleksandar; Lazić, Silvana.
History of Metallurgy on the Territory of Sisak and Banovina // Proceedings of International Science Conference Monuments of Old Metallurgy as Heritage of European Culture / Kieloch, Marian, editor(s).
Czestochowa : Drukarnia Garmond, 2009. 88-94 (lecture,published,scientific).
|
40. Lazić, Ladislav; Gojić, Mirko; Terzić, Katarina; Slokar, Ljerka.
Structural Defects in the Continuous Steel Casting // Proceedings book of 9th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet Sisak, 2009. 39-43 (poster,published,scientific).
|
41. Malina, Jadranka; Begić Hadžipašić, Anita; Zovko Brodarac, Zdenka; Unkić, Faruk.
Microstructural characteristics of nodular iron after charging with hydrogen // Proceedings book of 9th International foundrymen conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2009. 40-2009 (poster,published,scientific).
|
42. Malina, Jadranka; Dolić, Natalija; Markotić, Anto.
Corrosion resistance of aluminum alloys EN AW-5083 and EN AC-44200 in as-cast conditions // Proceedings book of 9th International foundrymen conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2009. 41-2009 (poster,published,scientific).
|
43. Malina, Jadranka; Rađenović, Ankica; Štrkalj, Anita; Unkić, Faruk; Čevizović, Nataša.
Phenol sorption on waste mould sand // Proceedings book of 9th International foundrymen conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2009. 42-2009 (poster,published,scientific).
|
44. Marušić, Vlatko; Rešković, Stoja; Stanić, D.
Influence of heat treatment on properties of AlSi9Cu3(Fe) alloy // Proceedings book of 9th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet Sveučilišta u Zagrebu, 2009. 43-49 (poster,published,scientific).
|
45. Stanić, Davor; Zovko Brodarac, Zdenka; Unkić, Faruk.
Microstructural and mechanical properties of the AlSi7Mg alloy samples cast in permanent mould // Proceedings book of 9th International foundrymen conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2009. 17-2009 (lecture,published,scientific).
|
46. Terzić, Katarina; Glavaš, Zoran; Unkić, Faruk.
Identification of phases in cast irons // Proceedings book of 9th International foundrymen conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2009. 44-2009 (poster,published,expert).
|
47. Unkić, Faruk; Glavaš, Zoran; Terzić, Katarina.
The influence of microstructural characteristics and temperatures on the toughness of ferritic ductile iron // Conference Proceedings of International 49th Foundry Conference Portorož 2009.
Ljubljana : Slovenian Foundrymen Society, 2009. (lecture,published,scientific).
|
48. Varga, A.; Kizek, J.; Tatič, M.; Lazić, Ladislav; Repešova, M.
Scales - the Consistent Problem During the Reheating Slabs in Push Furnaces // Proceedings of International Scientific Conference Monuments of Old Metallurgy as Heritage of European Culture / Kieloch, Marian, editor(s).
Czestochowa : Drukarnia Garmond, 2009. 103-110 (lecture,published,scientific).
|
49. Babić, Stjepan; Unkić, Faruk.
THE INFLUENCE SPEED SECOND PHASE ON THE STRENGTH HIGH PRESSURES DIE CASTING // Proceedings book of 8th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2008. 17-2008 (lecture,published,scientific).
|
50. Bišćan, Barbara; Rešković, Stoja.
Investigation of Hardness Fracture Toughness of Materials // Proceedings book of 8th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet Sisak, 2008. 63-68 (poster,published,scientific).
|
51. Dolić, Natalija; Markotić, Ante; Unkić, Faruk.
Investigation of Structural Homogeneity of EN AW-5083 Aluminium Alloy // Proceedings book of 8th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2008. 23-2008 (lecture,published,scientific).
|
52. Kožuh, Stjepan; Gojić, Mirko; Sorić, Tomislav.
The effect of annealing on corrosion properties of AISI 316L steel // Proceedings book of 8th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2008. 56-2008 (poster,published,expert).
|
53. Malina, Jadranka; Čelebić, Asja; Klaić, Boris; Schauperl, Zdravko.
Surface characterization of as - cast alloy ASTM F75 // Proceedings Book of 8th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Faculty of Metallurgy, University of Zagreb, 2008. 53-53 (poster,published,scientific).
|
54. Mrvar, Primož; Petrič, Mitja; Medved, Jožef; Unkić, Faruk.
Grain refining of Al-Si-X casting alloys and control of nucleation potential in foundries // Proceedings book of 8th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2008. 20-2008 (lecture,published,scientific).
|
55. Perković, Stojanka; Unkić, Faruk; Terzić, Katarina.
INFLUENCE OF CHEMICAL COMPOSITION VARIATIONS ON PROPERTIES OF MEDIUM-CARBON CAST STEEL QUALITY S30F // Proceedings book of 8th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2008. 54-2008 (poster,published,expert).
|
56. Rađenović, Ankica; Malina, Jadranka; Štrkalj, Anita, Ćurković, Lidija.
Removal of nickel and chromium ions from aqueous solutions by use the waste mould sand // Proceedings book of 8th Inter. Foundrymen Conf. / Unkić, Faruk, editor(s).
Sisak : Faculty of Metallurgy Sisak, 2008. 1-6 (lecture,published,scientific).
|
57. Rastovčan Mioč, Alenka; Sofilić, Tahir; Mioč, Boro.
Disposal of Metallurgical Waste and Research of its Potential Reuse // Proceedings Book of the 8th International Foundrymen Conference "Development of Foundry Management and Technology" / Unkić, Faruk, editor(s).
Sisak : Faculty of Metallurgy, University of Zagreb, 2008. 1-6 (lecture,published,scientific).
|
58. Rastovčan Mioč, Alenka; Sofilić, Tahir; Mioč, Boro.
Potential Reuse of Spent Foundry Sand // Proceedings Book of the 8th International Foundrymen Conference-Development of Foundry Management and Technology / Unkić, F., editor(s).
Sisak, Hrvatska : Faculty of Metallurgy, University of Zagreb, 2008. 1-6 (lecture,published,scientific).
|
59. Terzić, Katarina; Glavaš, Zoran; Unkić, Faruk.
Quantitative Metallographic Analysis of Cast Irons // 8th International Foundrymen Conference Development of Foundry Management and Technology : Proceedings book / Unkić, Faruk, editor(s).
Sisak : Faculty of Metallurgy, University of Zagreb, 2008. 57 (poster,published,expert).
|
60. Unkić, Faruk; Glavaš, Zoran; Terzić, Katarina.
Comparison of Cast Irons for Automotive Engine Thermo-mechanical Loaded Parts // Mednarodno 48. livarsko posvetovanje : Zbornik referatov = International 48th Foundry Conference : proceedings.
Ljubljana : Društvo livarjev Slovenije, 2008. (lecture,published,scientific).
|
61. Unkić, Faruk; Glavaš, Zoran; Terzić, Katarina; Bakić, Milan.
The Influence of Eelevated Temeratures on Microstructure of Cast Irons // 8th International Foundrymen Conference Development of Foundry Management and Technology : Proceedings book / Unkić, Faruk, editor(s).
Sisak : Faculty of Metallurgy, University of Zagreb, 2008. (lecture,published,scientific).
|
62. Zovko Brodarac, Zdenka; Dekanić, Branislava; Terzić, Katarina; Kalauz, Vinko; Unkić, Faruk.
SOLIDIFICATION AND MICROSTRUCTURAL CHARACTERISTICS OF THE AlSi10Mg ALLOY // Proceeding book of 8th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2008. 18-2008 (lecture,published,scientific).
|
63. Zovko Brodarac, Zdenka; Mrvar, Primož; Unkić, Faruk; Medved, Jožef.
Influence of the Cooling Rate on the Microstructure Development of the AlMg9 alloy // Conference proceedings of 48th International Foundry Conference Portorož 2008.
Ljubljana : Društvo livarjev Slovenije, 2008. (lecture,published,scientific).
|
64. Zovko Brodarac, Zdenka; Šašo, Božidar; Terzić, Katarina; Unkić, Faruk.
EXAMINATION OF THE PROPERTIES CONSISTENCY OF THE CHARGE MATERIAL GRADE EN AB AlSi12Fe(Cu) // Proceedings book of 8th International Foundrymen Conference / Unkić, Faruk, editor(s).
Sisak : Metalurški fakultet, 2008. 49-2008 (poster,published,scientific).
|
65. Babić, Stjepan; Unkić, Faruk.
The influence speed second phase on the properties high pressures die casting // Conference Proceedings International 47th Foundry Conference Portorož 2007.
Ljubljana, 2007. (lecture,published,scientific).
|
|
|
|
|
|
|
| |
Abstracts in Book of abstracts
|
| |
1. Malina, Jadranka; Radošević, Jagoda; Dolić, Natalija; Zovko Brodarac, Zdenka.
Passive behaviour of Al-Mg-Si alloy under the influence of chloride ions // Book of Abstract.
(poster,domestic peer-review,abstract,scientific).
|
2. Kosec, Ladislav; Gojić, Mirko; Kožuh, Stjepan; Kosec, Borut; Dražić, Goran; Šavli, Štefan.
The effect of long-term annealing at elevated temperature on microstructure and hardness of heat-resistant steel // Abstract Booklet 15th International Symposium on Metallography / Longauerova, Margita, editor(s).
Košice : Department of Materials Science, Faculty of Metallurgy, Technical University of Košice, 2013. 94-94 (poster,international peer-review,abstract,scientific).
|
3. Malina, Jadranka; Rađenović, Ankica.
Potential of metallurgical waste in methylene blue removal // Simpozij Vladimir Prelog / Hadžiev, Andrea ; Blažeković, Zdenko, editor(s).
Osijek, 2013. (poster,domestic peer-review,abstract,scientific).
|
4. Kosec, Ladislav; Šavli, Štefan; Kožuh, Stjepan; Holjevac Grgurić, Tamara; Nagode, Aleš; Kosec, Gorazd; Gojić, Mirko.
Transformation of austenite during isothermal annealing at 600-900°C for heat resistant stainless steel // POLYCHAR 20 - Book of Abstracts / Rogošić, Marko ; Macan, Jelena, editor(s).
Zagreb : University of Zagreb, Faculty of Chemical Engineering and Technology, 2012. 268-268 (poster,international peer-review,abstract,scientific).
|
5. Malina, Jadranka; Begić Hadžipašić, Anita; Jakopović, Branka.
Characterization of coatings on hot dip galvanized steel by optical microscopy // Book of Abstracts / Gajović, Andreja ; Tomašić, Nenad, editor(s).
Zagreb, 2012. 88-87 (international peer-review,abstract,scientific).
|
6. Malina, Jadranka; Ivaniš, Krešimir; Jakovljević, Suzana.
Fractographic characteristics of hydrogen charged CSP steel // Book of Abstracts / Gajović, Andreja ; Tomašić, Nenad, editor(s).
Zagreb, 2012. 88-89 (international peer-review,abstract,scientific).
|
7. Malina, Jadranka; Rađenović, Ankica; Štrkalj, Anita.
Waste mould sand as adsorbent for polluted waters treatment // Book of abstracts / Hadzi Jordanov, Svetomir ; Paunovic, Perica, editor(s).
Ohrid, 2012. (poster,international peer-review,abstract,scientific).
|
8. Rađenović, Ankica; Malina, Jadranka; Slokar, Ljerka.
Citric acid as a modifier of blast furnace sludge // Croatian Microscopy Symposium-Book of Abstracts / Gajović, Andreja ; Tomašić, Nenad, editor(s).
Zagreb : Hrvatsko mikroskopijsko društvo, 2012. 97-98 (poster,international peer-review,abstract,scientific).
|
9. Rađenović, Ankica; Terzić Katarina.
Microstructure of anode butts // 22th Congress of Chemists and Technologists-BOOK of ABSTRACTS / Hadzi Jordanov, Svetomir ; Paunovic, Perica, editor(s).
OHRID, 2012. 247 (poster,international peer-review,abstract,scientific).
|
10. Zovko Brodarac, Zdenka; Mrvar, Primož; Unkić, Faruk.
Investigation of AlMg9 alloy microscopic features related to cooling rate // Croatian Microscopy Symposium, Book of Abstract / Gajović, A. ; Tomašić, N., editor(s).
Zagreb : Hrvatsko mikroskopijsko društvo, 2012. 37-38 (lecture,domestic peer-review,abstract,scientific).
|
11. Brezinova, J.; Guzanova, A.; Mamuzić, Ilija.
Study of wear resistance of coatings deposited by high velocity oxygen fuel (HVOF) technology // Summaries of Lectures / Daniel Jankura, editor(s).
Košice : Faculty of Mechanical Engineering TV Košice nad Slovak Association for Surface Treatment, 2011. 17-17 (poster,international peer-review,abstract,scientific).
|
12. Ćurčija, Dušan; Mamuzić, Ilija; Buršak, Marian; Kliber, Jiri.
Effects of cross-roughness on cold rolling process with greases // Zbornik sažetaka / Jukić, Ante, editor(s).
Zagreb : Hrvatsko društvo za goriva i maziva, 2011. 33-33 (lecture,international peer-review,abstract,scientific).
|
13. Malina, Jadranka; Begić Hadžipašić, Anita; Malina, Marijan.
Hydrogen diffusivity in TRIP steel sheet // EUROMAT 2011-Abstracts, Montpellier, France.
2011. B13-P-1-19 (poster,international peer-review,abstract,scientific).
|
14. Matković, Tanja; Slokar, Ljerka; Matković, Prosper.
Development of new beta-type Ti-Co-Cr alloys for biomedical use // Euromat2011 / Morris, David, editor(s).
Montpellier : FEMS, 2011. 51-51 (poster,international peer-review,abstract,scientific).
|
15. Kochubey, O. O.; Mamuzić, Ilija; Polyakov, M. V.; Yevdokymov, D. V.
Global warming and future of metallurgical industry // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo 221-221 (poster,international peer-review,abstract,scientific).
|
16. Aračić, Stjepan; Krumes, Dragomir; Vitez, Ivan.
Tribocorrosion of low carbon steel C15E IN 5%NaCl and5%NaCl + SiO2 // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 200-200 (poster,international peer-review,abstract,scientific).
|
17. Babich, A. P.; Kochubey, O. O.; Jakšić, D.; Yevdokymov, D. V.
Improved mathematical models of phase transition in multicomponent media under microgravity conditions // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 234-234 (poster,international peer-review,abstract,scientific).
|
18. Babich, A. P.; Kochubey, O. O.; Mamuzić, Ilija; Yevdokymov, D. V.
Radiation cooling of metal spherical drop in vacuum // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 234-234 (poster,international peer-review,abstract,scientific).
|
19. Babich, A. P.; Kochubey, O. O.; Šipalo-Žuljević, J.; Yevdokymov, D. V.
Evaporation of liquid metal into vacuum // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 234-234 (poster,international peer-review,abstract,scientific).
|
20. Brazaluk, Iu. V.; Kochubey, O. O.; Jakšić, D.; Polyakov, M. V.; Yevdokymov, D. V.
Multiphase flow of liquid metal // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 221-221 (poster,international peer-review,abstract,scientific).
|
21. Brazaluk, Iu. V.; Kochubey, O. O.; Jurković, I.; Polyakov, M. V.; Yevdokymov, D. V.
Improved technology of spraying of protective covering // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 200-200 (poster,international peer-review,abstract,scientific).
|
22. Brazaluk, Iu. V.; Kochubey, O. O.; Tkalčić, D.; Polyakov, M. V.; Yevdokymov, D. V.
Interaction of moving bubbles // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 235-235 (poster,international peer-review,abstract,scientific).
|
23. Brazaluk, Iu. V.; Kochubey, O. O.; Vitez, Ivan; Polyakov, M. V.; Yevdokymov, D. V.
Dissolution of discrete phase particles in liquid metal // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 221-221 (poster,international peer-review,abstract,scientific).
|
24. Bukhanovskii, V. V.; Ćurčija, Dušan.
High-temperature Creep of Nickel-based Superalloy ZhS-6F // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 209-209 (poster,international peer-review,abstract,scientific).
|
25. Bukhanovskii, V. V.; Ćurčija, Dušan.
High-temperature Strength of γ-TiAl Alloy // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 209-209 (poster,international peer-review,abstract,scientific).
|
26. Bukhanovskii, V. V.; Mamuzić, Ilija.
Effect of Electropolishing on the Mechanical Characteristics of Chromium Alloy VKh-4 // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 209-209 (poster,international peer-review,abstract,scientific).
|
27. Chygyryns’kyy, V. V.; Kachan, A. Ya.; Mamuzić, Ilija; Ben’, A. N.
Generalized theory of plasticity // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 227-227 (poster,international peer-review,abstract,scientific).
|
28. Chygyryns’kyy, V. V.; Shevchenko, V. G.; Mamuzić, Ilija; Belikov, S. B.
About some peculiarities of harmonic functions in theory of elasticity // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 227-227 (poster,international peer-review,abstract,scientific).
|
29. Filatov, V. E.; Mamuzić, Ilija; Bukhanovskii, V. V.
Mechanical Characteristics of a Nickel-Chromium-Based Heat-Resistant Alloy in the Wide Range of Temperatures // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 207-208 (poster,abstract,scientific).
|
30. Gigović-Gekić, A.; Oruč, M.; Vitez, Ivan.
The effect of solution annealing on properties of steel Nitronic 60 // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49(2010)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 196-196 (poster,international peer-review,abstract,scientific).
|
31. Gribanova, A. V.; Veselovskij, V. B.; Mamuzić, Ilija.
The mathematical modelling and determination of the thermal physics parameters of solids at extreme thermal influence // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 200-200 (poster,international peer-review,abstract,scientific).
|
32. Gulyayev, Yu. G.; Mamuzić, Ilija; Shyfrin**, YE. I.; Garmashev, D. YU.
Perfection of processes of seamless steel tubes production // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 231-231 (poster,international peer-review,abstract,scientific).
|
33. Horsinka, J.; Kliber, J.; Drozd, K.; Mamuzić, Ilija.
Approximation model of the stress-strain curve for deformation of aluminium alloys // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 216-216 (poster,international peer-review,abstract,scientific).
|
34. Jakšić, D.
Optimal mechanical properties for bend of Al-alloys group 6000 // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 229-229 (poster,international peer-review,abstract,scientific).
|
35. Kharlamov, Y. A.; Mamuzić, Ilija; Lopata, L. A.
Tribological Coatings Selection and Development // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 213-213 (poster,international peer-review,abstract,scientific).
|
36. Kirichenko, R. O.; Veselovskij, V. B.; Mamuzić, Ilija.
The reduction of friction heat release in rubbing joints by temperature data // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 235-235 (poster,international peer-review,abstract,scientific).
|
37. Kochubey, O. O.; Ćurčija, Dušan; Polyakov, M. V.; Serbichenko, D. M.; Yevdokymov, D. V.
Asymptotic mathematical model of high intensive thermal action on metal surface // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49(2010)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 199-199 (poster,international peer-review,abstract,scientific).
|
38. Kochubey, O. O.; Ćurčija, Dušan; Yevdokymov, D.V.
Combined boundary element and particle method for numerical calculation of thermal pollution of environment // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 233-233 (poster,international peer-review,abstract,scientific).
|
39. Kochubey, O. O.; Jakšić, D.; Polyakov, M. V.; Yevdokymov, D. V.
Ecological, energetic and financial crises in future of modern industry // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 234-234 (poster,international peer-review,abstract,scientific).
|
40. Kochubey, O. O.; Jurković, I.; Polyakov, M. V.; Serbichenko, D. M.; Yevdokymov, D. V.
Temperature and thermoelastic stress-strain fields in half-space due to point source of heat // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 221-221 (poster,international peer-review,abstract,scientific).
|
41. Kochubey, O. O.; Jurković, J.; Polyakov, M. V.; Yevdokymov, D. V.
Bubble motion in liquid under microgravity conditions // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 234-234 (poster,international peer-review,abstract,scientific).
|
42. Kochubey, O. O.; Križanić, Rade; Polyakov, M. V.; Yevdokymov, D. V.
Active thermal protection and thermostating in metallurgical processes // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 221-221 (poster,international peer-review,abstract,scientific).
|
43. Kochubey, O. O.; Križanić, R.; Polyakov, M. V.; Serbichenko, D. M.; Yevdokymov, D. V.
Stress-strain state of non-asymptotically thin thermal protective covering // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 200-200 (poster,international peer-review,abstract,scientific).
|
44. Kochubey, O. O.; Mamuzić, Ilija; Polyakov, M. V.; Serbichenko, D. M.; Yevdokymov, D. V.
Casting in complex shape ingot mould // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 222-222 (poster,international peer-review,abstract,scientific).
|
45. Kochubey, O. O.; Mamuzić, Ilija; Polyakov, M. V.; Serbichenko, D. M.; Yevdokymov, D. V.
Thermal regimes of non-asymptotically thin thermal-protective covering // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 234-234 (poster,international peer-review,abstract,scientific).
|
46. Kochubey, O. O.; Mamuzić, Ilija; Polyakov, M. V.; Serbichenko, D. M.; Yevdokymov, D. V.
Thermal regimes of ablating layers // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 235-235 (poster,international peer-review,abstract,scientific).
|
47. Kochubey, O. O.; Mamuzić, Ilija; Polyakov, M. V.; Yevdokymov, D. V.
Mathematical model of fast cooling processes // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 221-221 (poster,international peer-review,abstract,scientific).
|
48. Kochubey, O. O.; Mamuzić, Ilija; Polyakov, M. V.; Yevdokymov, D. V.
Instability of liquid interface surface in microgravity // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 234-234 (poster,international peer-review,abstract,scientific).
|
49. Kochubey, O. O.; Povrzanović, A.; Yevdokymov, D. V.
Porous cooling systems // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 233-233 (poster,international peer-review,abstract,scientific).
|
50. Kochubey, O. O.; Šipalo Žuljević, J.; Polyakov, M. V.; Yevdokymov, D. V.
Inverse problem of air pollution // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 234-234 (poster,international peer-review,abstract,scientific).
|
51. Kochubey, O. O.; Tkalčić, D.; Yevdokymov, D. V.
Local changes of climate // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 233-233 (poster,international peer-review,abstract,scientific).
|
52. Kochubey, O. O.; Vitez, Ivan; Polyakov, M. V.; Serbichenko, D. M.; Yevdokymov, D. V.
Austenite-martensite phase transition in cylindrical bodies // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 199-200 (poster,international peer-review,abstract,scientific).
|
53. Kochubey, O. O.; Vitez, Ivan, Yevdokymov, D.V.
Numerical modeling of industrial soil pollution // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 234-234 (poster,international peer-review,abstract,scientific).
|
54. Kochubey, O. O.; Živković, V.; Polyakov, M. V.; Yevdokymov, D. V.
On equilibrium of ecological systems under influence of industrial activity // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 234-234 (poster,international peer-review,abstract,scientific).
|
55. Kochubey, O. O.; Živković, V.; Yevdokymov, D. V.
Pollution of upper layers of atmosphere // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 234-234 (poster,international peer-review,abstract,scientific).
|
56. Kormaníková, E.; Mamuzić, Ilija.
Numerical approach of modeling of composites with short fibres // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 202-202 (poster,international peer-review,abstract,scientific).
|
57. Mamuzić, Ilija.
Structure and properties of microlayer condensed composite materials for electrical contacts // Strength of materials and structure elements : abstracts of the International conference : volume 2 / V. T. Trocshenko, editor(s).
Kijev, 2010. 242-243 (poster,international peer-review,abstract,scientific).
|
58. Mamuzić, Ilija; Bukhanovskii, V. V.
Creep-Rupture Strength and High-Temperature Creep of Nickel-Chromium-Based Alloy // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 208-208 (poster,international peer-review,abstract,scientific).
|
59. Marušić, V.; Vitez, Ivan; Stanić, D.
The influence of composition of al alloy on properties of die casted engine components // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 202-202 (poster,international peer-review,abstract,scientific).
|
60. Matković, Tanja; Slokar, Ljerka; Matković, Prosper.
Effect of composition on the structure and properties of Ti-Co-Cr alloys // Metalurgija / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 215-215 (poster,international peer-review,abstract).
|
61. Matysiak, W.; Barišić, B.; Mamuzić, Ilija.
Elaboration of the technology of forming a conical product of sheet metal // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 227-227 (poster,abstract,scientific).
|
62. Podlesnij, S. V.; Veselovskij, V. B.; Ćurčija, Dušan.
Mathematic modeling and determination of the ration thermal conditions of the surface strengthening process // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 200-200 (poster,international peer-review,abstract,scientific).
|
63. Rađenović, Ankica; Terzić, Katarina.
MICROSTRUCTURE OF PETROLEUM COKE AS CARBURIZER // Summaries of Lectures, Metalurgija 49(2010)3 / Mamuzić, Ilija (ur.), editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 215-215 (poster,international peer-review,abstract,scientific).
|
64. V. Živković.
Reconstruction of reinforcing steel bars mill in steelworks Split // Sažeci predavanja s 9. međunarodnog simpozija Hrvatskog metalurškog društva SHMD '2010. "Materijali i metalurgija", tiskano u Metalurgija 49 (2010) 3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2010. 229-229 (poster,international peer-review,abstract,scientific).
|
65. Sofilić, Tahir; Merle, Vesna; Peček, Nataša; Rastovčan-Mioč, Alenka; Ćosić, Mario.
Steel Slag Instead Natural Aggregate In Asphalt Mixture // XXI. Hrvatski skup kemičara i kemijskih inženjera – Knjiga sažetaka / Novak, Predrag ; Pičuljan, Katarina ; Smolec, Sonja, editor(s).
Zagreb : Hrvatsko društvo kemijskih inženjera i tehnologa, 2009. 345-345 (poster,abstract,scientific).
|
66. Sofilić, Tahir; Mladenovič, Ana; Matijašić, Gordana; Šipušić, Juraj; Sofilić, Una.
Characterization of steel slag with purpose to define application posibilities in asphalt mixture production // XXI. hrvatski skup kemičara i kemijskih inženjera : knjiga sažetaka = book of abstracts / Pičuljan, Katarina ; Smolec, Sonja, editor(s).
Zagreb : Hrvatsko društvo kemijskih inženjera i tehnologa, 2009. 346-346 (poster,abstract,scientific).
|
67. Vitez, Ivan; Krumes, Dragomir; Kladarić, Ivica.
DAMAGES RAILWAY RAILS CAUSED BY WELDING AND RESURFACING DEFECTS // Rim 2009 - 7th International Scientific Conference on Production Engineering "Development and Modernization of Production" / Karabegović, Isak ; Jurković, Milan ; Doleček, Vlatko, editor(s).
Cairo, Egypt : University of Bihać, Faculty of technical Bihać, 2009. 31-32 (poster,international peer-review,abstract,scientific).
|
68. Malina, Jadranka; Malina, Marijan; Begić Hadžipašić, Anita.
Permeation Properties of Hydrogen Entrapped in TRIP steel // The 59th Annual Meeting of the International Society of Electrochemistry - Abstracts, Sevilla, Spain, 2008..
(poster,international peer-review,abstract,scientific).
|
69. MATIJEVIĆ, BOŽIDAR; STUPNIŠEK, MLADEN.
NOVELITY IN DIFFUSION COATING TECHNOLOGY // PROCEEDINGS- 2nd International Conference on Heat Treatment and Surface Engineering of Tools and Dies.
(invited talk,international peer-review,abstract,scientific).
|
70. Alfirević, Ivo.
A yield criterion of isotropic materials with different tensile and compressive yield point // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija", tiskano u Metalurgija 47(2008)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 267-273 (poster,international peer-review,abstract).
|
71. Berlov, A. I.; Veselovskiy, V. B.; Križanić, R.
Optimization of the thermal modes of component heatcover constructions // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija", tiskano u Metalurgija 47(2008)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 275-284 (poster,international peer-review,abstract,scientific).
|
72. Bevza, E. K.; Kochubey, O. O.; Jurković, M.; Yevdokymov, D. V.
Small oscillation of multiphase system near phase equilibrium // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija", tiskano u Metalurgija 47(2008)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 255-266 (poster,international peer-review,abstract,scientific).
|
73. Bosenko, T. M.; Veselovskiy, V. B.; Tkalčić, D.
Mathematical simulation of heat conductivity problems for component sodies at extreme influences taking into account thermal memory // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija", tiskano u Metalurgija 47(2008)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 275-284 (poster,international peer-review,abstract,scientific).
|
74. Brazaluk, Iu. V.; Kochubey, O. O.; Ćurčija, D.; Polyakov, M. V.; Yevdokymov, D. V.
On one mathematical model of particle in liquid metal // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija", tiskano u Metalurgija 47(2008)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 255-266 (poster,international peer-review,abstract,scientific).
|
75. Bukhanovskii, V. V.; Kharchenko, V. K.; Devčić, N.
Characteristics of high-temperature strength of tungsten alloys of the systems W-Re-Mo-Hf and W-Re-Mo-Hf-Â // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija", tiskano u Metalurgija 47(2008)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 229-254 (poster,international peer-review,abstract,scientific).
|
76. Bukhanovskii, V. V.; Kliber, J.; Križanić, R.
Creep-rupture strength and high-temperature creep of nickel-based superalloy ZhS-6U // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija", tiskano u Metalurgija 47(2008)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 229-254 (poster,international peer-review,abstract,scientific).
|
77. Bukhanovskii, V. V.; Polishuk, E. P.; Šipalo Žuljević, J.
The effect of heat treatment on the mechanical characteristics and failure mode of sheet molybdenum alloys // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija", tiskano u Metalurgija 47(2008)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 229-254 (poster,international peer-review,abstract,scientific).
|
78. Ćurković, Lidija; Rastovčan-Mioč, Alenka; Borić, Bojana; Veljačić, Emina.
KOMPETICIJSKA SORPCIJA Cu2+ I Zn2+ NA ELEKTROPEĆNOJ TROSCI // XII. ZNANSTVENO-STRUČNI SKUP VODA I JAVNA VODOOPSKRBA / Dadić, Željko, editor(s).
Zagreb : Hrvatski zavod za javno zdravstvo, 2008. 232-232 (poster,abstract,scientific).
|
79. Gigović-Gekić, A.; Oruč, M.; Vitez, Ivan.
Analyse and research of nonmetallic inclusion for steel 100Cr6 // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija", tiskano u Metalurgija 47(2008)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 229-254 (poster,international peer-review,abstract,scientific).
|
80. Grechanyuk, N. I.; Grechanyuk, I. N.; Osokin, V. A.; Bukhanovskii, V. V.; Kharchenko, V. V.; Vitez, I.
Physico-chemical, mechanical, and operational characteristics of condensed composite materials of the Cu-Mo system for electric contacts // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija", tiskano u Metalurgija 47(2008)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 229-254 (poster,international peer-review,abstract,scientific).
|
81. Grechanyuk, N. I.; Grechanyuk, I. N.; Osokin, V. A.; Kharchenko, V. V.; Bukhanovskii, V. V.; Rudnitskii, N. P.; Križanić, R.
Structure, physico-chemical, mechanical, and operational characteristics of condensed composite materials of the Cu-W system for electric contacts // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija", tiskano u Metalurgija 47(2008)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 229-254 (poster,international peer-review,abstract,scientific).
|
82. Grechanyuk, N. I.; Grechanyuk, I. N.; Osokin, V. A.; Kharchenko, V. V.; Bukhanovskii, V. V.; Rudnitskii, N. P.; Vitez, Ivan.
Structure, physico-chemical, mechanical, and operational characteristics of condensed composite materials of the Cu-Cr system for electric contacts // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija", tiskano u Metalurgija 47(2008)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 229-254 (poster,international peer-review,abstract,scientific).
|
83. Gubin, A. I.; Veselovskiy, V. B.; Ćurčija, D.; Kochubey, A. A.
Mathematical simulation and choice of optimum thermal models of conditinuous pouring became // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija", tiskano u Metalurgija 47(2008)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 255-266 (poster,international peer-review,abstract,scientific).
|
84. Jakšić, Drago.
Optimal mechanical properties for bend of Al-alloys group 6000 // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija", tiskano u Metalurgija 47(2008)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 267-273 (poster,international peer-review,abstract,scientific).
|
85. Jandrlić, Ivan; Rešković, Stoja.
Tube Testing with Eddy Current // Summaries of Lectures from 8th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy", tiskano u Metalurgija 47(2008)3, 229-254 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 246-246 (poster,international peer-review,abstract,scientific).
|
86. Kochubey, O. O.; Jurković, M.; Tkachenko, I. I.; Yevdokymov, D. V.
Numerical calculation of heating of complex shape solid body by boundary // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija", tiskano u Metalurgija 47(2008)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 275-284 (poster,international peer-review,abstract,scientific).
|
87. Kochubey, O. O.; Šipalo Žuljević, Josip; Polyakov, M. V.; Serbichenko, D. M.; Yevdokymov, D. V.
Diffusive bubble growth in microgravity // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija", tiskano u Metalurgija 47(2008)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 255-266 (poster,international peer-review,abstract,scientific).
|
88. Kožuh, Stjepan; Gojić, Mirko; Sorić, Tomislav.
Electrochemical study of AISI 316L steel after welding // Book of Abstracts RSE-SEE / Horvat-Radošević, Višnja ; Mandić, Zoran ; Gojo, Miroslav, editor(s).
Zagreb : Croatian Society of Chemical Engineers, 2008. 357-358 (poster,abstract,scientific).
|
89. Kundak, M.; Lazić, L.; Črnko, J.; Brovkin, V.L.
Influence of CO2 Emissions on the Possible Development of Metallurgy // Materials And Metallurgy / Materijali i Metalurgija / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 265-265 (poster,international peer-review,abstract,scientific).
|
90. Legin-Kolar, Mira; Rađenović, Ankica.
The study of different carbon materials as carburizer in foundry // Summaries of lectures, Metalurgija 47(2008) 3, 255-266. / Mamuzić, Ilija, editor(s).
Zagreb : Croatian Metallurgical Society, 2008. 263-263 (poster,international peer-review,abstract,scientific).
|
91. Lyashenko, B. A.; Bukhanovskii, V. V.; Bockus, S.; Tkalčić, D.
The Influence of type of heatresistant ceramic coatings on the high-temperature creep and failure mode of niobium alloy // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija", tiskano u Metalurgija 47(2008)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 229-254 (poster,international peer-review,abstract,scientific).
|
92. Marušić, V.; Vitez, Ivan; Stanić, D.
The influence of composition of Al alloy on properties of the casted engine components // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija", tiskano u Metalurgija 47(2008)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 229-254 (poster,international peer-review,abstract,scientific).
|
93. Matijević, Božidar; Stupnišek, Mladen.
Prevention of Reactive Soldering on Die Casting Parts // 17th IFHTSE CONGRES 2008.
KOBE : The Japan Society for Heat Treatment, 2008. 249-249 (poster,international peer-review,abstract,scientific).
|
94. Živković, V.
Reconstruction of reinforcing steel bars mill in steelworks split // Sažeci predavanja s 8. međunarodnog simpozija Hrvatskog metalurškog društva "Materijali i metalurgija", tiskano u Metalurgija 47(2008)3 / Mamuzić, Ilija, editor(s).
Zagreb : Hrvatsko metalurško društvo, 2008. 267-273 (poster,international peer-review,abstract,scientific).
|
95. Ćurčija, Dušan; Mamuzić, Ilija.
Estimate of lubricant film on pipe rolling in cages/mills // 40. stručno-znanstveni skup MAZIVA 2007 : Zbornik sazetaka / Legiša, Ivo, editor(s).
Zagreb : Hrvatski inženjerski savez, 2007. 381-38 (lecture,domestic peer-review,abstract,scientific).
|
96. Henč-Bartolić, Višnja; Bončina, Tonica; Jakovljević, Suzana; Pipić, Davor; Zupanič, Franc.
Laser Action-Aluminium Target // Zbornik povzetkov 14. mednarodni znastveni sestanek Vakuumska znanost in tehnika / Šetina, Janet ; Kovač, Janez, editor(s).
Ljubljana, 2007. 15-16 (poster,international peer-review,abstract).
|
97. Matković, Tanja; Slokar, Ljerka; Matković, Prošper.
Effect of composition on the structure and properties of Ti-Co-Cr alloys // Abstracts of the European Congress on Andvanced Materials and Process (EUROMAT 2007) / Delannay, Francis, editor(s).
Nuernberg : FEMS, 2007. 78-78 (poster,international peer-review,abstract,scientific).
|
98. Zupanič, Franc; Bončina, Tonica; Pipić, Davor; Henč-Bartolić, Višnja.
Cross-Section of Surface Craters Induced by a Laser Beam in a Cu-Sn-Zn-Pb Alloy // Proc. of 8th Multinational Congress on Microscopy.
Prague, 2007. 207-208 (poster,international peer-review,abstract,scientific).
|
|
|
|
|
|
|
| |
Unpublished papers
|
| |
1. Hren, Smiljan; Lalić, Marijo; Žmak, Irena.
Manufacturing profitability of finished bronze products in export business // .
(lecture,ppt presentation,expert).
|
2. Zovko Brodarac, Zdenka; Unkić, Faruk.
Faculty of Metallurgy University of Zagreb - scientific and research possibilities and education // .
(lecture,unpublished,scientific).
|
3. Zovko Brodarac, Zdenka.
Investigation possibilities on the Faculty of Metallurgy // Suvremene koncepcije proizvodnje odljevaka.
Metalurški fakultet (lecture,ppt presentation,expert).
|
4. Aleksandrov Fabijanić, Tamara; Jeren, Ivan; Puklavec, Vesna.
INFLUENTIAL FACTORS ON THE TOUGHNESS OF NANOSTRUCTURED HARD METALS // Proceedings of 14th Joint Vacuum Conference.
2012. (poster,international peer-review,unpublished,scientific).
|
5. Tamara Holjevac Grgurić; Martina Radoš; Faruk Unkić.
Characterization of bentonites for green sand mixtures // Suvremene koncepcije proizvodnje odljevaka / Faruk Unkić, editor(s).
Sisak, Hrvatska : Metalurški fakultet, 2012. 1-46 (invited talk,ppt presentation,scientific).
|
6. Malina, Jadranka.
Hydrogen embrittlement and cold cracks - a specific form of stress corrosion of structural steels // Zbornik radova stručnog skupa Pogonski lomovi i oštećenja konstrukcija - kako ih izbjeći, FSB, Zagreb, 2011.
Zagreb, 2011. (invited talk,ppt presentation,expert).
|
7. Zovko Brodarac, Zdenka; Brnardić, Ivan; Holjevac Grgurić, Tamara; Unkić, Faruk.
Centre for Foundry Technology - SIMET // Ljevarstvo - stanje i perspektive.
(lecture,ppt presentation,expert).
|
8. Slokar, Ljerka.
Microscopy at Faculty of Metallurgy // .
(poster,ppt presentation,expert).
|
9. Dutour Sikirić, Mathieu; Deza, Michel; Delgado-Friedrichs, Olaf.
Space fullerenes // .
(lecture,international peer-review,ppt presentation,scientific).
|
10. Malina, Jadranka; Rađenović, Ankica; Štrkalj, Anita.
Waste foundry sand as sorbens for treating of contaminated water // .
(invited talk,ppt presentation,scientific).
|
11. Tahir Sofilić, Alenka Rastovčan-Mioč, Boro Mioč, Una Sofilić.
APPLICATION EAF SLAG IN ROAD CONSTRUCTION // .
Sisak, 2009. (invited talk,ppt presentation,scientific).
|
12. Deza, Michel; Dutour Sikirić, Mathieu; Delgado-Friedrichs, Olaf.
The enumeration of space fullerenes // .
(lecture,international peer-review,ppt presentation,scientific).
|
|
|
|
|
|
|
| |
Dissertations
|
| |
1. Begić Hadžipašić, Anita.
The influence of microstructure on hydrogen diffusion and embrittlement of multiphase fine-grained steels with increased plasticity and strength / doctoral thesis.
Sisak : Metalurški fakultet, 07.07. 2010,
179 pages. Mentor: Malina, Jadranka.
|
2. Dolić, Natalija.
Influence of Solidification and Cooling Conditions on the Properties of Semicontinuous Cast Slabs of Al-Mg alloy / doctoral thesis.
Sisak : Metalurški fakultet, 02. 11. 2010.,
269 pages. Mentor: Unkić, Faruk ; Medved, Jožef.
|
3. Slokar, Ljerka.
Effect of cobalt and niobium on the stability of beta phase in a biomedical titanium-chromium alloys / doctoral thesis.
Sisak : Metalurški fakultet, 14.04. 2010.,
131 pages. Mentor: Matković, Tanja.
|
4. Andreja, Carek.
Investigation of relationships between properties and structural irregularities of Co-cr alloys joints / doctoral thesis.
Zagreb : Stomatološki fakultete, 19.11. 2009.,
192 pages. Mentor: Živko Babić, Jasenka.
|
5. Boris, Klaić.
Surface analysiss of base Ni-Cr and Co-Cr dental alloys at nanometer scale by atomic force microscopy / doctoral thesis.
Zagreb : Stomatološki fakultet, 09.07.2009. 2009,
226 pages. Mentor: Baučić, Ivo ; Svetličić, Vesna.
|
6. Štrkalj, Anita.
Sorption Cr(VI) and Ni(II) ions from aqueous solution on carbon anode dust / doctoral thesis.
Sisak : Metalurški fakultet, 09. lipnja 2009,
201 pages. Mentor: Rađenović, Ankica.
|
7. Zovko Brodarac, Zdenka.
Solidification of the AlMg9 Alloy / doctoral thesis.
Ljubljana : Naravoslovnotehniška fakulteta, 10.06. 2009.,
152 pages. Mentor: Mrvar, Primož ; Medved, Jožef ; Unkić, Faruk.
|
8. Kožuh, Stjepan.
The effect of post-weld heat treatment on properties and microstructure of welded austenitic stainless steel / doctoral thesis.
Sisak : Metalurški fakultet, 21.04 2008.,
151 pages. Mentor: Gojić, Mirko.
|
9. Glavaš, Zoran.
Optimization of impact toughness of nodular cast iron by artificial intelligence methods / doctoral thesis.
Sisak : Metalurški fakultet, 30.01. 2007.,
301 pages. Mentor: Unkić, Faruk.
|
|
|
|
|
|
|
| |
Master thesis
|
| |
1. Jakopović, Branka.
Zinc coatings in corrosion protection of transformers / pre-Bologna master thesis.
Zagreb : Fakultet kemijskog inženjerstva i tehnologije, 11.07. 2012.,
58 pages. Mentor: Malina, Jadranka.
|
2. Kalauz, Vinko.
Investigation of secondary Al-alloys properties / pre-Bologna master thesis.
Sisak : Metalurški fakultet, 19.12. 2011.,
119 pages. Mentor: Zovko Brodarac, Zdenka.
|
3. Martišković, Josip.
The influence of melt preconditioning on ductile iron properties / pre-Bologna master thesis.
Sisak : Metalurški fakultet, 02.03. 2011.,
86 pages. Mentor: Unkić, Faruk.
|
4. Zeljko, Snježana.
THE INFLUENCE OF CHEMICAL COMPOSITION ON THE TEMPERATURE STABILITY OF GRAY IRON / pre-Bologna master thesis.
Sisak : Metalurški fakultet, 30.09. 2011.,
83 pages. Mentor: Glavaš, Zoran.
|
5. Mioč, Boro.
The effect of annealing on properties of welded low-alloyed CrMoNb steel / pre-Bologna master thesis.
Sisak : Metalurški fakultet, 09.03. 2007,
117 pages. Mentor: Gojić, Mirko.
|
|
|
|
|
|
|
| |
Graduation thesis
|
| |
1. Banko, Dorian.
Path Optimization Tool using Genetic Algorithms / baccalaureus graduate thesis.
Rijeka : Tehnički Fakultet, 25.09. 2012,
49 pages. Mentor: Car, Zlatan.
|
2. Domitrović, Štefanija.
Redesign of three-axis machining in multi-axis / baccalaureus graduate thesis.
Rijeka : Tehnički Fakultet, 20.09. 2012,
63 pages. Mentor: Car, Zlatan.
|
3. Kostanjevac, Danijel.
Design tools for deep drawing / baccalaureus graduate thesis.
Rijeka : Tehnički Fakultet, 20.09. 2012,
56 pages. Mentor: Car, Zlatan.
|
4. Licul, Mauro.
Improving the measurement plan housing turbochargers / baccalaureus graduate thesis.
Rijeka : Tehnički Fakultet, 20.09 2012,
44 pages. Mentor: Car, Zlatan.
|
5. Lukić, Igor.
THE CONTROL AXIDATION OF STEEL SURFACE / baccalaureus graduate thesis.
ZAGREB : FAKULTET STROJARSTVA I BRODOGRADNJE, 10.07. 2012,
36 pages. Mentor: MATIJEVIĆ, BOŽIDAR.
|
6. Ljubotina, Alen.
Control of bolt tightening torque for a given ship anchor / graduate thesis.
Rijeka : Tehnički Fakultet, 20.09 2012,
58 pages. Mentor: Car, Zlatan.
|
7. Mitić, Sandra.
Hydrogen embrittlement as consequence of hydrogen diffusion in steel materials / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 26. 09. 2012.,
29 pages. Mentor: Begić Hadžipašić, Anita.
|
8. Novak, Vanja.
The application of metallic coatings in corrosion protection of metals / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 26. 09. 2012.,
30 pages. Mentor: Begić Hadžipašić, Anita.
|
9. Ovčar, Nikola.
The design of the clamping device housing turbo blowers / baccalaureus graduate thesis.
Rijeka : Tehnički Fakultet, 20.09. 2012,
42 pages. Mentor: Car, Zlatan.
|
10. Perčić, Katja.
Injection Mold Design / baccalaureus graduate thesis.
Rijeka : Tehnički Fakultet, 20.09 2012,
84 pages. Mentor: Car, Zlatan.
|
11. Petar Vladić.
POSSIBILITY OF APPLICATION OF WASTE MOULD MIXTURE IN DIFFERENT INDUSTRY SECTORS / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 26. 09. 2012,
20 pages. Mentor: Štrkalj, Anita.
|
12. Petrović, Dalibor.
The application of inhibitors in corrosion protection of metals / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 26. 09. 2012.,
24 pages. Mentor: Begić Hadžipašić, Anita.
|
13. Simčić, Renato.
Making structural solutions robotic manipulation system / graduate thesis.
Rijeka : Tehnički Fakultet, 14.03. 2012,
91 pages. Mentor: Car, Zlatan.
|
14. Svetličić, Branimir.
Making structural solutions automated clamping devices / graduate thesis.
Rijeka : Tehnički Fakultet, 14.03. 2012,
91 pages. Mentor: Car, Zlatan.
|
15. Zubović, Josip.
Measurement accuracy and repeatability of the robot arm / pre-Bologna graduate thesis.
Rijeka : Tehnički Fakultet, 20.07. 2012,
109 pages. Mentor: Car, Zlatan.
|
16. Augusta, Domagoj.
Duplex process of aluminizing and nitriding of steels / baccalaureus graduate thesis.
Zagreb : Fakultet strojarstva i brodogradnje, 10.02. 2011.,
77 pages. Mentor: Božidar Matijević.
|
17. Baglama, Martina.
The properties of gray iron centrifugally cast tubes / graduate thesis.
Sisak : Metalurški fakultet, 13.04. 2011.,
82 pages. Mentor: Unkić, Faruk.
|
18. Bogović, Iva-Nicol.
Measurement of the Turbo Compressor Housing with the Digitization System Atos / baccalaureus graduate thesis.
Rijeka : Tehnički Fakultet, 19.09. 2011,
56 pages. Mentor: Katalinić, Branko.
|
19. Božić, Denis.
Measurement of the alternator carrier on the coordinate measuring machine Gage max 755 navigator / baccalaureus graduate thesis.
Rijeka : Tehnički fakultet, 04.02. 2011,
71 pages. Mentor: Barišić, Branimir.
|
20. Bucić, Antonio.
Manipulation and Cooperation of Two Robotic Hands / graduate thesis.
Rijeka : Tehnički Fakultet, 13.09. 2011,
109 pages. Mentor: Car, Zlatan.
|
21. Drašković, Luka.
Creating Virtual Models and Simulations of Production Workers / graduate thesis.
Rijeka : Tehnički fakultet Rijeka, 13.09. 2011,
114 pages. Mentor: Car, Zlatan.
|
22. Formanek, Davor.
Influence of post oxidation on the chemical resistance of aluminized and nitrided steel / baccalaureus graduate thesis.
Zagreb : Fakultet strojarstva i brodogradnje, 12.07. 2011.,
63 pages. Mentor: Matijević, Božidar.
|
23. Hasković, Damir.
Creating Virtual Models and Simulations of Manufacturing Plant / graduate thesis.
Rijeka : Tehnički fakultet, 13.09. 2011,
110 pages. Mentor: Car, Zlatan.
|
24. Havliček, Leo.
The application of electric arc slag for binding CO2 generated in the production of steel / graduate thesis.
Sisak : Metalurški fakultet, 16. 12. 2011.,
87 pages. Mentor: Malina, Jadranka.
|
25. Hodak, Marko.
Measuring Flatness of a Housing for Oil Filter / baccalaureus graduate thesis.
Rijeka : Tehnički Fakultet, 19.09. 2011,
58 pages. Mentor: Katalinić, Branko.
|
26. Ivanić, Ivana.
Determination of phase transformation of niobium microalloyed steel / graduate thesis.
Sisak : Metalurški fakultet, 11. 01. 2011.,
96 pages. Mentor: Rešković, Stoja.
|
27. Janđel, Jurica.
DUCTILE IRON – PRODUCTION, PROPERTIES AND APPLICATION / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 28.09. 2011.,
39 pages. Mentor: Glavaš, Zoran.
|
28. Kozina, Franjo.
THE ASSESSMENT OF THE MICROSTRUCTURAL FEATURES OF DUCTILE IRON BY USING THERMAL ANALYSIS / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 13.09. 2011.,
40 pages. Mentor: Glavaš, Zoran.
|
29. Maleković, Mirela.
Development of microstructure during solidification of Al-Si alloys / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 29.9. 2011,
33 pages. Mentor: Zovko Brodarac, Zdenka.
|
30. Marjanović, Tihomir.
THE INFLUENCE OF MICROSTRUCTURAL FEATURES ON THE TENSILE PROPERTIES OF DUCTILE IRON / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 28.09. 2011.,
29 pages. Mentor: Glavaš, Zoran.
|
31. Mikulić, Valentina.
METHODS OF WASTEWATER TREATMENT IN METALLURGICAL INDUSTRY / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 29.9 2011,
19 pages. Mentor: Štrkalj, Anita.
|
32. Mitić, Ivan.
USE STATIC EXTRACTION METHOD IN METALLURGY / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 29.9. 2011,
21 pages. Mentor: Štrkalj, Anita.
|
33. Omeragić, Marko Jasmin.
Measurement of Illuminance next to Machines/Work places / pre-Bologna graduate thesis.
Rijeka : Tehnički fakultet, 10.03. 2011,
53 pages. Mentor: Barišić, Branimir.
|
34. Pašić, Milorad.
Measurement of Rotational Speed of Machining Machines / graduate thesis.
Rijeka : Tehnički fakultet, 21.03. 2011,
80 pages. Mentor: Barišić, Branimir.
|
35. Petrač, Edi.
Development and Application of Robotic Arms for Manipulation of Small Workpieces / graduate thesis.
Rijeka : Tehnički Fakultet, 13.09. 2011,
104 pages. Mentor: Car, Zlatan.
|
36. Prerad, Dario.
Influence of the iron on properties of AlSi9Cu3(Fe) secondary alloy / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 29.9. 2011.,
30 pages. Mentor: Zovko Brodarac, Zdenka.
|
37. Smolčić, Dražen.
Microstructural characterization of duplex stainless steel after welding / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 17.11. 2011.,
31 pages. Mentor: Kožuh, Stjepan.
|
38. Stojaković, Ana.
THE EFFECT OF METALLIC CHARGE COMPONENTS AND COOLING RATE ON MICROSTRUCTURE OF DUCTILE IRON / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 29.09. 2011.,
35 pages. Mentor: Glavaš, Zoran.
|
39. Šimon, Joško.
Desing and Control of a Parallel Kinematics Machines / baccalaureus graduate thesis.
Rijeka : Tehnički fakultet Rijeka, 13.09. 2011,
67 pages. Mentor: Car, Zlatan.
|
40. Ujević, Eugen.
Forensic identification numbers of vehicles / graduate thesis.
Split : Sveučilišni strudijski centar za forenzične znanosti, 25. 11. 2011,
38 pages. Mentor: Mršić, Gordan.
|
41. Uravić, Valter.
Measurement of Tank Volume / baccalaureus graduate thesis.
Rijeka : Tehnički Fakultet, 18.7. 2011,
124 pages. Mentor: Car, Zlatan.
|
42. Veljačić, Emina.
Ductile iron alloyed by silicon and boron / graduate thesis.
Sisak : Metalurški fakultet, 16.03. 2011.,
84 pages. Mentor: Unkić, Faruk.
|
43. Vezmar, Mihael.
Corrosion control of low-carbon steel boiler tubes / graduate thesis.
Sisak : Metalurški fakultet, 25.11. 2011,
78 pages. Mentor: Malina, Jadranka.
|
44. Živec, Martina.
WASTE WATER TREATMENT IN THE FOUNDRY LIPOVICA d.o.o. / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 20.9. 2011,
27 pages. Mentor: Štrkalj, Anita.
|
45. Albert, Mjeda.
Calibration for the discharge of liquid fuel and gas / pre-Bologna graduate thesis.
Rijeka : Tehnički fakultet, 01.11. 2010,
81 pages. Mentor: Barišić, Branimir.
|
46. Belić, Tomislav.
KINETIC OF LOW TEMPERATURE ALUMINIZING OF STEEL / pre-Bologna graduate thesis.
Zagreb : Fakultet strojarstva i brodogradnje, 09.07. 2010,
61 pages. Mentor: Matijević, Božidar.
|
47. Biščan, Barbara.
Testing of hardness and resistance to fracture of brittle materials / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 1.7 2010,
25 pages. Mentor: Rešković, Stoja.
|
48. Brlić, Tin.
Ultrasonic control of heat exchanger / graduate thesis.
Sisak : Metalurški fakultet, 15. 07. 2010.,
40 pages. Mentor: Rešković, Stoja.
|
49. Crnogorac, Renata.
The properties of molding mixture / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 22.09. 2010.,
26 pages. Mentor: Glavaš, Zoran.
|
50. Crnjac, Ante.
Microstructural and mechanical properties of low alloyed Mn-Mo steel after quenching and tempering / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 19.07. 2010.,
25 pages. Mentor: Gojić, Mirko.
|
51. Čondić, Benjamin.
Properties of welded join after gas welding of CrMoNb steel / pre-Bologna graduate thesis.
Sisak : Metalurški fakultet, 22.03. 2010.,
66 pages. Mentor: Gojić, Mirko.
|
52. Emir, Vehabović.
MEASUREMENT AND CONTROL TECHNICAL CHARACTERISTICS OF A WINDOW ACCORDING TO HRN EN 14351-1 / baccalaureus graduate thesis.
Rijeka : Tehnički fakultet, 01.11. 2010,
88 pages. Mentor: Barišić, Branimir.
|
53. Grubišić, Željko.
Efficiency of the recuperator of a rotational furnace / graduate thesis.
Sisak : Metalurški fakultet, 10.12. 2010.,
110 pages. Mentor: Lazić, Ladislav.
|
54. Jaić, Tomislav.
The application of radiographic testing of welded joints in heat exchanger / graduate thesis.
Sisak : Metalurški fakultet, 22. 10. 2010,
37 pages. Mentor: Rešković, Stoja.
|
55. Lazanja, Kristijan.
Measurement control and measurement scales for counting PCE - CBS 15 / graduate thesis.
Rijeka : Tehnički fakultet, 20.9. 2010,
93 pages. Mentor: Barišić, Branimir.
|
56. Maksim, Ćirić.
Modeling and simulation of manufacturing systems / pre-Bologna graduate thesis.
Rijeka : Tehnički fakultet, 15.10. 2010,
75 pages. Mentor: Car, Zlatan.
|
57. Miljenko, Jurasić.
APPLICATION OF TOTAL STATIONS FOR CRANE PATH INSPECTION / pre-Bologna graduate thesis.
Rijeka : Tehnički fakultet, 01.11. 2010,
75 pages. Mentor: Barišić, Branimir.
|
58. Mirilović, Svjetlana.
Independent verification of the quality management system / graduate thesis.
Sisak : Metalurški fakultet, 15. 07. 2010.,
39 pages. Mentor: Rešković, Stoja.
|
59. Novković, Duško.
Manufacturing of mobile platform by suport of Solidworks software using metal forming technology / graduate thesis.
Rijeka : Tehnički fakultet, 20.09. 2010.,
87 pages. Mentor: Barišić, Branimir.
|
60. Petrović, Andrea.
Assessment of capacity procesavaljanja welded pipe / graduate thesis.
Sisak : Metalurški fakultet, 22. 07 2010.,
50 pages. Mentor: Rešković, Stoja.
|
61. Poje, Dražen.
Construction of the frame for Combi Electra 100 R-50 with the use of forming technology / graduate thesis.
Rijeka : Tehnički fakultet, 04.10. 2010,
100 pages. Mentor: Barišić, Branimir.
|
62. Proleta, Danijel.
Spectrometry measurement of package sheet metal structure / baccalaureus graduate thesis.
Rijeka : Tehnički fakultet, 20.09. 2010.,
67 pages. Mentor: Barišić, Branimir.
|
63. Radošević, Marko.
Torque wrench calibration using the measurement system Burster / graduate thesis.
Rijeka : Tehnički fakultet, 20.9. 2010,
60 pages. Mentor: Barišić, Branimir.
|
64. Šipuš, Ivica.
Binding of Cr (IV) ions in the waste mold mixture / pre-Bologna graduate thesis.
Sisak : Metalurški fakultet, 23.09. 2010,
49 pages. Mentor: Štrkalj, Anita.
|
65. Štimac, Sanjin.
Measuring resolution determination of the force and torque automated process of closing of a medical bottle / graduate thesis.
Rijeka : Tehnički fakultet, 20.9. 2010,
69 pages. Mentor: Barišić, Branimir.
|
66. Tkalec, Andrija.
Process of oxidation of aluminized hot work tool steels / baccalaureus graduate thesis.
Zagreb : Fakultet strojarstva i brodogradnje, 17.07. 2010.,
50 pages. Mentor: Matijević, Božidar.
|
67. Bilić, Vedran.
Materials for manufacturing of compensators / pre-Bologna graduate thesis.
Slavonski Brod : Strojarski fakultet, 06.05. 2009.,
73 pages. Mentor: Vitez, Ivan.
|
68. Bižić, Vesna.
Castability of secondary aluminum alloys / pre-Bologna graduate thesis.
Sisak : Metalurški fakultet, 17.09. 2009.,
89 pages. Mentor: Unkić, Faruk.
|
69. Brentin, Arian.
The influence of processing parameters at the bending in V die / baccalaureus graduate thesis.
Rijeka : Tehnički fakultet, 21.09. 2009.,
85 pages. Mentor: Barišić, Branimir.
|
70. Dušić, Dalibor.
Properties and application of springs / pre-Bologna graduate thesis.
Slavonski Brod : Strojarski fakultet, 29.05. 2009.,
102 pages. Mentor: Vitez, Ivan.
|
71. Herout, Maja.
Mechanical properties and microstructure of welded pipes from low carbon steel / pre-Bologna graduate thesis.
Sisak : Metalurški fakultet, 29.05. 2009.,
70 pages. Mentor: Gojić, Mirko.
|
72. Ivan Vorel.
IZBOR POSTUPKA MODIFICIRANJA POVRŠINA ZA ALATE ZA TLAČNI LIJEV ALUMINIJA / graduate thesis.
Zagreb : Fakultet strojarstva i brodogradnje, 23.10. 2009.,
80 pages. Mentor: Matijević, Božidar.
|
73. Jandrlić, Ivan.
Quality Control of Welded Tubes / pre-Bologna graduate thesis.
Sisak : Metalurški fakultet Sisak, 23.01. 2009.,
56 pages. Mentor: Rešković, Stoja.
|
74. Nikolić, Ivan.
Properties of precipitation hardened stainless steel belt / pre-Bologna graduate thesis.
Slavonski Brod : Strojarski fakultet, 21.12. 2009.,
83 pages. Mentor: Vitez, Ivan.
|
75. Rupčić, Tomislav.
The influence of microstructure on the toughness of ductile iron / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 11.10. 2009.,
22 pages. Mentor: Glavaš, Zoran.
|
76. Stanić, Damir.
Application of Graphometrical Measurements on Tinplate TH 415 / pre-Bologna graduate thesis.
Rijeka : Tehnički fakultet, 09.07. 2009.,
51 pages. Mentor: Barišić, Branimir.
|
77. Svetličić, Branimir.
Measuring inspection of roughness of processed surfaces / baccalaureus graduate thesis.
Rijeka : Tehnički fakultet, 21.09. 2009.,
88 pages. Mentor: Barišić, Branimir.
|
78. Vezmar, Mihael.
Investigation of toughness of steel samples pipes on lower temperature / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 23.09. 2009.,
27 pages. Mentor: Rešković, Stoja.
|
79. Akalović, Andrija.
Nondestructive Methods of Material Testing in Industry / pre-Bologna graduate thesis.
Slavonski Brod, Hrvatska : Strojarski fakultet, 12.06. 2008.,
88 + 4 priloga pages. Mentor: Vitez, Ivan.
|
80. Baglama, Martina.
Waste mould sand as adsorbent for phenol removal from water solutions / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 30. 11. 2008.,
21 pages. Mentor: Malina, Jadranka.
|
81. Bakić, Milan.
Characteristics of cast irons for automotive engine thermomechanical loaded parts / pre-Bologna graduate thesis.
Sisak : Metalurški fakultet, 08.04. 2008.,
70 pages. Mentor: Unkić, Faruk.
|
82. Čevizović, Nataša.
The application of activated carbon and silica sand in the treatment of rainfall / pre-Bologna graduate thesis.
Sisak : Metalurški fakultet, 11.07. 2008.,
52 pages. Mentor: Malina, Jadranka.
|
83. Dekanić, Branislava.
The influence of melt treatment on solidification and microstructure properties of AlSi10Mg alloy / pre-Bologna graduate thesis.
Sisak : Metalurški fakultet, 08.04. 2008.,
113 pages. Mentor: Unkić, Faruk.
|
84. Gelemanović, Ivana.
Influence of Niobium on Recrystallisation of Steel in Hot Rolling Process / baccalaureus graduate thesis.
Sisak : Metalurški fakultet Sisak, 30.10. 2008.,
21 pages. Mentor: Rešković, Stoja.
|
85. Grubišić; Željko.
Temperature measurement in the rotary hearth furnace zones / baccalaureus graduate thesis.
Sisak : Metalurški fakultet, 28.10. 2008,
29 pages. Mentor: Lazić ; Ladislav.
|
86. Laćman, Drago.
Mechanical properties and microstructure of AISI 321 steel welded by TIG technique / pre-Bologna graduate thesis.
Sisak : Metalurški fakultet, 27.02. 2008.,
63 pages. Mentor: Gojić, Mirko.
|
87. Perec, Ivančica.
The corrosion of steel tubes of evaporators in sugar industry / pre-Bologna graduate thesis.
Sisak : Metalurški fakultet, 11.07. 2008.,
42 pages. Mentor: Malina, Jadranka.
|
88. Ivana Tusić - Šterc.
Emission measurements at heat treatment of steel castings / pre-Bologna graduate thesis.
Sisak : Metalurški fakultet, 27.02. 2007,
82 pages. Mentor: Lazić, Ladislav.
|
89. Prlja, Jasmina.
Corrosion of Heat Exchangers in Petrochemical Industry / pre-Bologna graduate thesis.
Sisak : Metalurški fakultet, 23. 11. 2007.,
57 pages. Mentor: Malina, Jadranka.
|
90. Sudec, Igor.
Homogenization of aluminium alloy EN AW-5083 / pre-Bologna graduate thesis.
Sisak : Metalurški fakultet, 20.03. 2007.,
106 pages. Mentor: Markotić, Ante.
|
|
|
|
|
|
|
| |
Other papers
|
| |
1. Novak, Vanja.
Examination of corrosion resistance of nickel coated dual phase structural steel, 2012.
|
2. Petrović, Dalibor.
Corrosion inhibition of structural steel in acid medium by Aloe vera as "green" inhibitor, 2012.
|
3. Špadina, Boris.
Discovery of nature of electron in DC of equipment MAID, 2011.
(discovery).
|
4. Baglama, Martina.
Phenol adsorption on spent foundry sand, 2009.
|
5. Unkić, Faruk; Glavaš, Zoran.
Ferrous cast irons, 2009.
|
6. Mamuzić, Ilija.
8th International Symposium Materials and Metallurgy, 47 (2008) (1) 3-8.
|
7. Mamuzić, Ilija.
List of reviewers of the articles published in journal Metallurgy in 2007, 47 (2008), 1 ; 64-64.
|
8. Čevizović, Nataša.
EXTRACT OF SANSEVIERIA PLANT – CORROSION INHIBITIOR FOR ALUMINIUM, 2007.
|
9. Čevizović, Nataša; Perec, Ivančica.
Inhibition of aluminium corrosion by extract of Sansevieria plant, 2007.
|
10. Henč-Bartolić, Višnja.
Electron diffraction, 2007.
|
11. Mamuzić, Ilija.
8th International Symposium of Croatian Metallurgical Society, 46 (2007), 1 ; 3-8.
|
|
|
|
|
|
|
| |
Patents
|
| |
|
|
|
|
|
All the contents of bib.irb.hr, except where otherwise noted, is licensed under a Creative Commons licence
