Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Influence of burner performance on SO3 generation (CROSBI ID 474955)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Bogdan, Željko ; Schneider, Daniel Rolph Influence of burner performance on SO3 generation // Proceedings of 22nd International Conference on Information Technology Interfaces / Kalpić, Damir ; Hljuz Dobrić, Vesna (ur.). Zagreb: Sveučilišni računski centar Sveučilišta u Zagrebu (Srce), 2000

Podaci o odgovornosti

Bogdan, Željko ; Schneider, Daniel Rolph

engleski

Influence of burner performance on SO3 generation

Various impacts of the combustion process parameters on the SO3 generation in the steam generator furnace of the 210 MW oil-fired Power Plant Sisak have been studied by using mathematical modelling. The results of the simulation showed that the excess combustion air of 1.07-1.10 could not be decreased without modification of other combustion parameter because of soot appearance and increased CO concentration. By increasing the fuel atomising steam pressure i.e. by decreasing the fuel droplet size to 50 mm, the excess air has been decreased to 1.035, which represents the upper limit of desired result. Thereby the average SO3 concentration in flue gases was about 22 ppm.

SO3 reduction; low temperature corrosion; spray combustion

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

2000.

objavljeno

Podaci o matičnoj publikaciji

Proceedings of 22nd International Conference on Information Technology Interfaces

Kalpić, Damir ; Hljuz Dobrić, Vesna

Zagreb: Sveučilišni računski centar Sveučilišta u Zagrebu (Srce)

Podaci o skupu

22nd International Conference on Information Technology Interfaces

predavanje

13.06.2000-16.06.2000

Pula, Hrvatska

Povezanost rada

Strojarstvo