Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Application of additive correction method to fluid flow calculation (CROSBI ID 464593)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Virag, Zdravko ; Džijan, Ivo ; Korbar, Radoslav Application of additive correction method to fluid flow calculation // Proceedings of the 2nd congress of Croatian Society of Mechanics / Marovic, Pavao ; Soric, Jurica ; Vrankovic, Nikola (ur.). Zagreb: Hrvatsko društvo za mehaniku (HDM), 1997. str. 575-582-x

Podaci o odgovornosti

Virag, Zdravko ; Džijan, Ivo ; Korbar, Radoslav

engleski

Application of additive correction method to fluid flow calculation

Two iterative procedures for solving algebraic equation systems that arise in two-dimensional fluid flow calculations when using a five-point scheme are proposed. The sensitivity of these procedures to the cell-aspect ratio and to the number of equations is examined. The proposed procedures are compared to the Strongly Implicit Procedure (SIP), and then applied to the laminar flow over a backward facing step. The obtained results demonstrate robustness of proposed methods as well as a significant improvement (with respect to SIP) in convergence rate of the SIMPLE algorithm, when large fluid flow problems are concerned. The proposed methods are simple and can be easily included in existing CFD codes.

computational fluid dynamics; strongly impicit procedure; additive correction multigrid

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

575-582-x.

1997.

objavljeno

Podaci o matičnoj publikaciji

Proceedings of the 2nd congress of Croatian Society of Mechanics

Marovic, Pavao ; Soric, Jurica ; Vrankovic, Nikola

Zagreb: Hrvatsko društvo za mehaniku (HDM)

Podaci o skupu

2nd Congress of Croatian Society of Mechanics

predavanje

18.09.1997-20.09.1997

Supetar, Hrvatska

Povezanost rada

Strojarstvo