engleski

Composite conversion and temperature rise using a conventional, plasma arc, and an experimental blue LED curing unit

The objective of this study was to evaluate the degree of conversion and temperature rise in three different composite materials when illuminated by an experimental light source [blue superbright light emitting diodes (LEDs)] and compared with plasma light and traditional photopolymerization unit. The degree of conversion and temperature rise were measured using Fourier transform infrared (FTIR) spectroscopy and digital multimeter, respectively. The results revealed significantly higher degree of conversion values in case of conventional curing than with other two light sources whereas temperature rise was significantly lower when blue LEDs and plasma light were used. There were great differences in light intensities between blue LEDs of only 9 mW cm(-2) compared with plasma light of 1370 mW cm(-2) and Elipar II of 560 mW cm(-2) . Better match of LED spectral distribution peak to camphorquinone absorption distribution peak probably explains much lower intensities used for similar photopolymerization effect like in the case of rapid plasma lamp curing.

Composite photopolymerization. Blue leds. Plasma light

nije evidentirano