Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

The Design Method of 8 bar linkage system (CROSBI ID 466037)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Ščap, Dragutin ; Ćular, Nedjeljko The Design Method of 8 bar linkage system // Proceedings of the Design '98 / Marjanović, Dorian (ur.). Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 1998. str. 489-495-x

Podaci o odgovornosti

Ščap, Dragutin ; Ćular, Nedjeljko

engleski

The Design Method of 8 bar linkage system

The paper presents a method for the optimum design of level-luffing crane mechanism with an 8 bar linkage system. The problem is solved by using a combination of kinematic analysis, optimal synthesis of the mechanism with nonlinear programming and the evaluation of results by the designer. The optimum design method consists of the following four phases: 1. Synthesis of the level-luffing mechanism, by minimization of the reduced load force; 2. Evaluation of results and their elaboration by the designer, with the specification of physical properties of the links, such as the mass, center of mass and moment of inertia; 3. Optimal synthesis of the counterbalance mechanism, with minimization of the drive force function; 4. Design of the counterbalance mechanism, final kinetostatic analysis of the mechanism with calculation of their joint and link loads, stress analysis, checking of the results. The paper also outlines the methodology of the synthesis of complex design systems by using interactive design optimization. The optimum design process was made for cranes with the maximum reach-radius from 28 to 40 m.

optimal design; crane jib; level-luffing mechanism

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

489-495-x.

1998.

objavljeno

Podaci o matičnoj publikaciji

Proceedings of the Design '98

Marjanović, Dorian

Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu

Podaci o skupu

5th international design conference DESIGN 98

predavanje

19.05.1998-22.05.1998

Dubrovnik, Hrvatska

Povezanost rada

Strojarstvo