Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

The influence of the welding parameters upon the pitting corrosion of TIG and MIG welding joints on the thin plates of high alloyed steel (CROSBI ID 468534)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Juraga, Ivan ; Grubić, Kajo The influence of the welding parameters upon the pitting corrosion of TIG and MIG welding joints on the thin plates of high alloyed steel // Welding and Joing Science and Technology. Madrid: ASM International, 1997. str. 509-514-x

Podaci o odgovornosti

Juraga, Ivan ; Grubić, Kajo

engleski

The influence of the welding parameters upon the pitting corrosion of TIG and MIG welding joints on the thin plates of high alloyed steel

Research of the influence of welding parameters upon the corrosion resistance of welded joints has been reported ion this paper. The research has been conducted upon the high alloyed steel of AISI 304 (X5CrNi 18 10) grade, the used plates being 3 mm thick. MIG and TIG welding processes (With and without filler material) have been applied. Only one run has been made, and the joint fit-up was of I shape. For both processes and each joint, heat input was approximately of the same value. Such value has been achieved by a combinations of welding current and appropriate welding speed. Investigation of the corrosion resistance of welded joints has been made on the acceptable joints, produced at approximately same heat input.

TIG;MIG-welding; welding parameters; pitting corrosion; high alloyed steel

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

509-514-x.

1997.

objavljeno

Podaci o matičnoj publikaciji

Welding and Joing Science and Technology

Madrid: ASM International

Podaci o skupu

Welding and Joining Science and Technology

predavanje

10.03.1997-12.03.1997

Madrid, Španjolska

Povezanost rada

Strojarstvo