Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Vortex Flow Meter with a Queazy-twodimensional Bluff Body for a Lower Minimum Reynolds Number (CROSBI ID 468614)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Kesić, Petar ; Džuho, Hasan ; Damić, Vjekoslav Vortex Flow Meter with a Queazy-twodimensional Bluff Body for a Lower Minimum Reynolds Number // XV IMEKO. Osaka, 1999

Podaci o odgovornosti

Kesić, Petar ; Džuho, Hasan ; Damić, Vjekoslav

engleski

Vortex Flow Meter with a Queazy-twodimensional Bluff Body for a Lower Minimum Reynolds Number

Performances of vortex meter with a queazy-twodimensional bluff body have been investigated. The bluff body dimensions were optimizied in meter body of inside diameter 50 mm. The ratio of the bluff body width and the pipe diameter changes from 0.24 at the tube axis to 0.28 at the tube walls. The K-factor linearity was found to be better than 0.75% in the range 1:20 for the Reynolds number larger than 20000 and better than 1.5% for the Reynolds number larger than 13000. The prototype series consisting of four meters was produced and calibrated with water and air. The mean Strouhal number for the entire series was 0.848 with the linearity limits 1.5%. The pressure loss coefficient is equal to 1.5.The effects of the upstream and downstream disturbances were studied.

vortex flowmeter; flowmeter calibration; installation effects

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

1999.

objavljeno

Podaci o matičnoj publikaciji

XV IMEKO

Osaka:

Podaci o skupu

XV IMEKO World Congress

predavanje

01.06.1999-07.06.1999

Osaka, Japan

Povezanost rada

Brodogradnja, Zrakoplovstvo, raketna i svemirska tehnika