An analysis of the production and applicability of austempered ductile iron and alloyed AS-CAST bainitic ductile iron (CROSBI ID 470510)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Cajner, Franjo ; Mrša, Josipa ; Smoljan, Božo
engleski
An analysis of the production and applicability of austempered ductile iron and alloyed AS-CAST bainitic ductile iron
The productions of bainitic ductile iron by austempering heat treatment and byalloying during the casting were investigated. The process parameters of bainitic ductile iron production by the austempering heat treatment and by alloying were analyzed. According to recommended dimensions and geometrical shape of machine parts and required mechanical properties, the chemical composition and appropriate parameters of both processes were determined. A technological and economical comparasion of the production ability and applicability in machine building was done between austempered ductile iron and alloyed as-cast bainitic ductile iron. Limitations in application of both processes were done from comparsion of mechanical properties between machine parts processed by both processes. Realistic cost/benefit analysis and technological comparison between processes ability was done too.
ductile iron; mold-cooling; austempering; quench and tempering
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
77-86.
1998.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the 4th ASM Heat treatment and surface engineering conference in Europe
Firrao, Donato ; Mittermeier, Eric J.
Firenza : München: AIM - Associazione italiana di metallurgia
Podaci o skupu
ASM Heat treatment and surface engineering conference in Europe (4 ; 1998)
poster
19.09.1998-21.09.1998
Firenca, Italija