Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

HULL STRUCTURE ANALYSIS OF BULK CARRIER - Technical Report (CROSBI ID 751130)

Druge vrste radova | elaborat/studija

Žanić, Vedran ; Jančijev, Tomislav, Andrić, Jerolim HULL STRUCTURE ANALYSIS OF BULK CARRIER - Technical Report // Technical Report - 75 pages. 2000.

Podaci o odgovornosti

Žanić, Vedran ; Jančijev, Tomislav, Andrić, Jerolim

engleski

HULL STRUCTURE ANALYSIS OF BULK CARRIER - Technical Report

The objective of the analysis is to investigate the structural strength of the 3-hold model of the bulk carrier 51 000 TDW (project 972) in fulfillment of requirements for direct calculation of the classification society American Bureau of Shipping (ABS).3D FEM MAESTRO model for critical structural holds is generated in accordance with ABS safety factors and recommendations. 3D FEM model has approximately 77 570 DOF and 9340 macro- elements. Two test loadcases : LC1=ABS LC1,but with ballast in hold no.3 LC2= ABS LC4, but with liquid in holds no. 5 and 3 (s.g.=1.5)are generated using given weight distribution and adjusted to the required bending moment distribution from the corresponding hydrostatic calculation. This report describes the preliminary results (stresses and adeqacy parameters) obtained.Safety factor gama is calculated from the normalised safety factor g.

Bulk carrier; finite elements; MAESTRO modeling

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

Technical Report - 75 pages

2000.

nije evidentirano

objavljeno

Povezanost rada

Brodogradnja