Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Insuring Traceability in Measuring Roughness Parameters (CROSBI ID 479951)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Mahović, Sanjin ; Runje, Biserka ; Indof, Danijela Insuring Traceability in Measuring Roughness Parameters // Proceedings of the 5th International Scientific Conference on Production Engineering / Cebalo, Roko ; Schulz, H. (ur.). Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 1999. str. 49-56-x

Podaci o odgovornosti

Mahović, Sanjin ; Runje, Biserka ; Indof, Danijela

engleski

Insuring Traceability in Measuring Roughness Parameters

Over the several years of research in studying the roughness of engineering surfaces in the Laboratory for precise length measurements at the Faculty of Mechanical Engineering and Naval Architecture in Zagreb, all the scientific and material conditions have been provided to make the Laboratory the certified institution for the standard unit for measuring the surface roughness parameters. The suggested calibration system is based on the Set of Roughness reference standards LFSB of top measuring properties, developed and realised in co-operation between the Laboratory of FSB and the Factory for Semi-conductors RIZ-Zagreb. Due to the research work and the existence of standards base in this field, the Laboratory at the Faculty of Mechanical Engineering and Naval Architecture has been certified by the Government Bureau for Standards and Measurements, as well as, by the end of 1994, by SIT (Servizio di Taratura in Italia) for calibration of standards and devices in the testing of roughness. This paper will present a systemic overview of the method of insuring traceability at the Laboratory for Precise Length Measurements for the groove depth d and roughness parameter Ra, as well as the experience in determining and confirming the declared uncertainties of measurement.

traceability; surface roughness; calibration system

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

49-56-x.

1999.

objavljeno

Podaci o matičnoj publikaciji

Proceedings of the 5th International Scientific Conference on Production Engineering

Cebalo, Roko ; Schulz, H.

Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS)

Podaci o skupu

5th International Scientific Conference on production Engineering

predavanje

17.06.1999-18.06.1999

Opatija, Hrvatska

Povezanost rada

Strojarstvo