Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Finite Element Simulation of Combined Forward-Backward Extrusion of the Body of Automatic Valve (CROSBI ID 480059)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Math, Miljenko ; Mahović, Sanjin ; Grizelj, B. Finite Element Simulation of Combined Forward-Backward Extrusion of the Body of Automatic Valve // Proceedings of the 10th International DAAAM Symposium / Katalinić, B. (ur.). Beč: DAAAM International Vienna, 1999. str. 321-322-x

Podaci o odgovornosti

Math, Miljenko ; Mahović, Sanjin ; Grizelj, B.

engleski

Finite Element Simulation of Combined Forward-Backward Extrusion of the Body of Automatic Valve

The process of simultaneous forward-backward extrusion the body of automatic valve for central heating installations is analyzed. The design of the tool and the manufacturing procedures are increasingly carried out by computer aided design and manufacturing (CAD/CAM). These procedures are normally based on numerical methods which take into account all physical conditions of the deformed material during the process. For this purpose, Finite Element Method (FEM) has been developed in the past in different ways. This paper highlights the finite element approach and simulation as a very useful technique in studying, where there is a generally close correlation in the load results obtained with FEM and those obtained experimentally.

forming; extrusion; finite element method; simulation

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

321-322-x.

1999.

objavljeno

Podaci o matičnoj publikaciji

Proceedings of the 10th International DAAAM Symposium

Katalinić, B.

Beč: DAAAM International Vienna

Podaci o skupu

The 10th DAAAM International Symposium

predavanje

21.10.1999-23.10.1999

Beč, Austrija

Povezanost rada

Strojarstvo