Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Heat Transfer in the Fluidized Bed at Superoptimal Fluidization (CROSBI ID 481938)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Galović, Antun ; Andrassy, Mladen ; Mudrinić, Saša Heat Transfer in the Fluidized Bed at Superoptimal Fluidization // 12th International Conference on Thermal Engineering and Thermogrammetry / Benko, Imre (ur.). Budimpešta: Scientific Society of Measurement, Automation and Informatics, 2001. str. 311-317-x

Podaci o odgovornosti

Galović, Antun ; Andrassy, Mladen ; Mudrinić, Saša

engleski

Heat Transfer in the Fluidized Bed at Superoptimal Fluidization

Experimental results of measured data on realized heta fluxesand corresponding heat transfer coefficients at spiral tube coil probe submerged verticaly to a fluidized systemof quartz and pure air are presented.During the experiments, the fluidized bed was operating in the superoptimal range of gas velocities.This means the coil probe is only partialy submerged into the fluidized bed at rest, so fluidizing gas velocities above the optimum value have to be applied in order to engage the upper parts of the probe in the fluidization heta treansfer conditions.The experiments have been carried out with two awerage sand granulations: 0,358 and 0,630 mm.

fluidized bed; spiral tube coil; superoptimal range of fluidization

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

311-317-x.

2001.

objavljeno

Podaci o matičnoj publikaciji

12th International Conference on Thermal Engineering and Thermogrammetry

Benko, Imre

Budimpešta: Scientific Society of Measurement, Automation and Informatics

Podaci o skupu

12th International Conference on Thermal Engineering and Thermogrammetry

predavanje

13.06.2001-15.06.2001

Budimpešta, Mađarska

Povezanost rada

Strojarstvo