Influence of the stress state on the J-integral value by fracture toughness specimens with medium thickness (CROSBI ID 483926)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Kozak, Dražan ; Kljajin, Milan ; Semenski, Damir
engleski
Influence of the stress state on the J-integral value by fracture toughness specimens with medium thickness
: Numerical calculation of J-integral on BxB fracture toughness specimens with thickness of B=36 mm has been performed. For this thickness neither pure plane stress nor pure plane strain state assumption is not valid, because there prevails mixed state-of-stress. In that case, only solid finite element model of the specimen give us satisfied results. This paper shows that finite element solutions of J-integral for planes extracted from the 3-D model enable us nearest results to the experimental ones. However, it seems that for the structures with medium thickness plane strain state is more dominating, especially after initiation of the crack.
fracture toughness specimen; J-integral; plane stress; plane strain; finite element analysis
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
287-288-x.
2002.
objavljeno
Podaci o matičnoj publikaciji
Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Learning from Nature'
Katalinić, Branko
Beč: DAAAM International Vienna
Podaci o skupu
13th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Learning from Nature'
poster
23.10.2002-26.10.2002
Beč, Austrija