Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Band saw blade strain guides effectiveness (CROSBI ID 465587)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Goglia, Vlado ; Beljo-Lučić Ružica Band saw blade strain guides effectiveness // Machines-Tool-Workpieces and Equipment / Oswald, Jan (ur.). Zvolen: Tehničko Sveučilište u Zvolenu (TUZ), 1997. str. 137-141-x

Podaci o odgovornosti

Goglia, Vlado ; Beljo-Lučić Ružica

engleski

Band saw blade strain guides effectiveness

Cutting accuracy is one of the most importante goals in the saw mill production. It can be expressed by several parameters. One of them is the board surface roughness. The surface roughness can be measured ba several methods. The paper describe the measurement results of the board surface roughness carried out by a data acquisition system andinductive tranducer. The surface roughness measurements were carriedout in order to define the influence of two influencing parameters: a) the type of saw blade guides and b) the saw blade strain force There were tested and compared two types of saw blade guides. Three levels of saw blade strain forces were used on the band saw blade equiped by strain guides causing sawv blade stresses of 100, 120 and 140 MPa, respectively.

band saw;strain force; saw blade guides; surface roughness

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

137-141-x.

1997.

objavljeno

Podaci o matičnoj publikaciji

Machines-Tool-Workpieces and Equipment

Oswald, Jan

Zvolen: Tehničko Sveučilište u Zvolenu (TUZ)

Podaci o skupu

Forest-Wood-Enviroment

predavanje

08.09.1997-11.09.1997

Zvolen, Slovačka

Povezanost rada

nije evidentirano