Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Influence of the printing techniques on the characteristic of the recycled fibers (CROSBI ID 487111)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Bolanča, Zdenka ; Barbarić Mikočević, Željka ; Bolanča Mirković, Ivana Influence of the printing techniques on the characteristic of the recycled fibers // Proceedings of the 12th International DAAAM Symposium "Danube Adria Association for Automation and Manufacturing" / Katalinić, Branko (ur.). Beč: DAAAM International Vienna, 2001. str. 33-34

Podaci o odgovornosti

Bolanča, Zdenka ; Barbarić Mikočević, Željka ; Bolanča Mirković, Ivana

engleski

Influence of the printing techniques on the characteristic of the recycled fibers

The article presents the investigation results of the multicolour recycled prints obtained by the digital printing with powder toner as well as the digital printing with liquid toner and by the conventional offset printing process with inks based on mineral oil. The results show smaller efficiency of flotation for the prints from digital printing techniques and smaller handsheet brightness in relation to offset printing. The possible influences ofthe printing techniques, ink composition and print drying process on efficiency of deinking flotation and characteristics of recycled fiber are discussed in the article. (Rad nije prezentiran na skupu!!!)

printing; offset printing; deinking flotation; flotation efficiency

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

33-34.

2001.

objavljeno

Podaci o matičnoj publikaciji

Proceedings of the 12th International DAAAM Symposium "Danube Adria Association for Automation and Manufacturing"

Katalinić, Branko

Beč: DAAAM International Vienna

3-901509-19-4

Podaci o skupu

International DAAAM Symposium "Danube Adria Association for Automation and Manufacturing" (12 ; 2001)

poster

24.10.2001-27.10.2001

Beč, Austrija

Povezanost rada

Grafička tehnologija