Strengthing process of high-strength weldable structural bainitic steel H-75 (CROSBI ID 679474)
Prilog sa skupa u zborniku | sažetak izlaganja sa skupa | međunarodna recenzija
Podaci o odgovornosti
Križanić, Rade ; Mamuzić, Ilija ; Nikolić, Đurđica
engleski
Strengthing process of high-strength weldable structural bainitic steel H-75
The investigated steel has R ≥ 600 MPa, K ≥ 40 J/cm2. The internal symbol of the investigated steel is H-75.The content of C ≤ 0.10 % the steel is low alloyed with Mn Cr Ni and Mo and micro-alloyed with Nb and Al with the increased content of nitroge. Depending on the test conditions, the starting points of the strenghting process and the equilization points of the rate of strengthing and softening process are shown. The rates of strengthing and duration of deformation were determined up the starting point of softening and dynamic of recrystalization. The show test results allow us to define the technological parameters for processing of the investigated steel in hot state.
steel H-75 ; bainite ; structure ; weldable ; high-strength
Tiskano u: Metalurgija 37 (1998) 2, 109.
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
109-109.
1998.
objavljeno
Podaci o matičnoj publikaciji
Sažeci predavanja s 3. Međunarodnog simpozija hrvatskih metalurga, "Stanje i razvitak plastične obradbe kovina i slitina"
Mamuzić, Ilija
Zagreb: Hrvatsko metalurško društvo
Podaci o skupu
3. Međunarodni simpozij hrvatskih metalurga "Stanje i razvitak plastične obradbe kovina i slitina"
poster
25.06.1998-27.06.1998
Šibenik, Hrvatska