Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Precision bending in two stages (CROSBI ID 490086)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Grizelj, Branko ; Grizelj, Dejan ; Kenter, Muhlis. I Precision bending in two stages // Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Reconstruction and Development" / Branko, Katalinić ; (ur.). Sarajevo: DAAAM International Vienna, 2003. str. 171-172-x

Podaci o odgovornosti

Grizelj, Branko ; Grizelj, Dejan ; Kenter, Muhlis. I

engleski

Precision bending in two stages

Abstract: In manufacturing of working parts by metal forming there are a number of various methods, owing to sorts and largeness of parts as well as the demands for form and accuracy that cause different procedures and ways of bending process .Elastic part of deformation causes aberration of form and accuracy in bending. The important criterion in validation of bended parts presents the aberration of bending angle. As a measure for angle accuracy, it can be taken into account a relative error of bending angle. For the improvement of accuracy it is used a model, that compensate the mechanical spring back. The influence of mechanical spring back on bending angle can be eliminated, if it is in certain range of opposite direction and the same amount. The following elements exter influence on bending: press-brak, die, and work piece geometry. This paper analysis the influence precision bending in two stages.

bending; tool; part geometry; bending in two stages

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

171-172-x.

2003.

nije evidentirano

objavljeno

Podaci o matičnoj publikaciji

Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Reconstruction and Development"

Branko, Katalinić ;

Sarajevo: DAAAM International Vienna

Podaci o skupu

14th International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Reconstruction and Development"

predavanje

22.10.2003-25.10.2003

Sarajevo, Bosna i Hercegovina

Povezanost rada

Povezane osobe




Strojarstvo