Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Changes of technical characteristics of chain saws during service life (CROSBI ID 491480)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Goglia, Vlado ; Puljak, Stjepan Changes of technical characteristics of chain saws during service life // Proceedings of the 16th International Wood Machining Seminar / Tanaka, Chiaki (ur.). Matsue: Organizing Committee of the 16 IWMS, 2003. str. 288-297-x

Podaci o odgovornosti

Goglia, Vlado ; Puljak, Stjepan

engleski

Changes of technical characteristics of chain saws during service life

The paper presents results of the research carried out into the operating time influence on technical characteristics of motor chain saws. The research was carried out on a sample of 32 motor chain saws (16 Stihl 038 and 16 Husqvarna 266SG chain saws) in order to find out the possible changes that may occur during the four-year operation period of the saws. For that reason the tested sample included chain saws that had been in normal use for one, two, three and four years. All tested saws were used under the same operating conditions during which they had been maintained in the same way. Measurements were carried out on normal production saws randomly chosen. Previous to testing all saws were examined and adjusted in accordance with producer´s recommendations. The research has shown that there are almost no indications of significant changes of the investigated technical chain saws characteristics during normal four-year operation period. This conclusion suggestes the necessity of monitoring the main technical characteristics of the motor chain saws for a longer period of use.

chain saw; operating time; technical characteristics

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

288-297-x.

2003.

objavljeno

Podaci o matičnoj publikaciji

Tanaka, Chiaki

Matsue: Organizing Committee of the 16 IWMS

Podaci o skupu

International Wood Machining Seminar

pozvano predavanje

24.08.2003-30.08.2003

Matsue, Japan

Povezanost rada

Šumarstvo