Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

INFLUENCE OF LAMINATION ANGLES ON THE STRESSES AND STRAINS VALUES IN THE LAMINATED COMPOSITE PLATES (CROSBI ID 495065)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Vnučec, Zdravko INFLUENCE OF LAMINATION ANGLES ON THE STRESSES AND STRAINS VALUES IN THE LAMINATED COMPOSITE PLATES // ATDC&#8217 ; 02 Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić, Branko (TU Vienna, Austria) &#38 et al. (ur.). Slavonski Brod: DAAAM International Vienna ; Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2002. str. 93-98-x

Podaci o odgovornosti

Vnučec, Zdravko

engleski

INFLUENCE OF LAMINATION ANGLES ON THE STRESSES AND STRAINS VALUES IN THE LAMINATED COMPOSITE PLATES

In this paper, a numerical investigation of engineering properties of laminated plates and the stress-strain analysis for various lamination angles of continuous fiber composite laminates are studied. The individual continuous fiber/matrix laminas are oriented in the required directions and bonded together to form a laminate plate. By using the terms of classical lamination theory and Hooke&#8217 ; s law, the numerical estimate of the stress and strain values of three different angle-ply four-layered symmetric laminated plates for various lamination angles (+-alfa)s of laminas is carried out. In the examples, the analyzed laminates have been composed of unidirectional laminas made of three characteristic composite materials: reinforcement fibers of E-glass, graphite and Kevlar49, respectively and as matrix material epoxy resin were used. The calculated results of the stress-strain distributions in the layers for three analyzed laminated plates subjected to known the force resultant Nx are presented graphically in diagrams.

laminated composite plate; classical lamination theory; strain; stress

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

93-98-x.

2002.

nije evidentirano

objavljeno

Podaci o matičnoj publikaciji

ATDC&#8217 ; 02 Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries

Katalinić, Branko (TU Vienna, Austria) & Kljajin, Milan (TU Osijek, Croatia)

Slavonski Brod: DAAAM International Vienna ; Strojarski fakultet Sveučilišta u Slavonskom Brodu

Podaci o skupu

1st DAAAM International Conference on Advanced Technologies for Developing Countries

predavanje

12.09.2002-14.09.2002

Slavonski Brod, Hrvatska

Povezanost rada

Strojarstvo