Parameters influencing wet tensile strength of moulding mixture (CROSBI ID 497118)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Budić, Ivan ; Novoselović, Daniel ; Škorić, Stephan
engleski
Parameters influencing wet tensile strength of moulding mixture
Scabbing occurs when pouring large size castings, resulting in presence of scabs in castings. Pouring of molten metal exerts following influences on the mould: mechanical influences, chemical and heat influences. Heat introduction dries the mould, so that at the top of the mould cavity we have temperature approximately equal to temperature of the molten metal, which varies depending on the height of the mould. Water content in the mould evaporates and condensate in the mould zone called wet tensile zone, where temperature reaches 100º ; ; C. Consequently we get reduction of mould mixture strength, scabbing, falling and creation of sand scabs on the casting. Numerous variables affect this phenomenon of scabbing, whereby our paper undertakes to examine only a few of them, such as: moisture percentage, bentonit content, medium size of quartz sand and mould compression strength.
scabbing in the mould; influential parameters; wet tensile strength
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
127-130.
2004.
objavljeno
Podaci o matičnoj publikaciji
4th International Conference "Industrial engineering - new challenges to SME" : proceedings
Papstel, J. ; Katalinić, Branko
Talin: University of Technology
Podaci o skupu
International Conference "Industrial engineering - new challenges to SME" (4 ; 2004)
predavanje
29.04.2004-30.04.2004
Talin, Estonija