Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Study of shielding gas and filler material influence on MAG welding process stability - an application of the developed on-line monitoring system (CROSBI ID 497973)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Samardžić, Ivan ; Kolumbić, Zvonimir ; Klarić, Štefanija Study of shielding gas and filler material influence on MAG welding process stability - an application of the developed on-line monitoring system // Proceedings of 8th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2004 / Ekinović, S. ; Brdarević, S. ; Vivancos, J. et al. (ur.). Zenica: Faculty of Mechanical Engineering in Zenica, Escola Tecnica Superior D`Enginyeria Industrial de Barcelona, Department d`Enginyeria Mechanica, Universitat Politecnica de Catalunya, 2004. str. 183-186-x

Podaci o odgovornosti

Samardžić, Ivan ; Kolumbić, Zvonimir ; Klarić, Štefanija

engleski

Study of shielding gas and filler material influence on MAG welding process stability - an application of the developed on-line monitoring system

Process stability is one of the base selection criteria for filler material, shielding gas and optimal welding parameters of the MAG welding. In order to determine influence of filler material and shielding gas selection, computer supported on-line acquisition and processing of main welding parameters (welding voltage and welding current) was performed using developed on-line monitoring system. Besides, during MAG welding process, audible sound signals were monitored. Two types of shielding gas were used: (a) carbon-dioxide and (b) gas mixture of argon (82%) and carbon-dioxide (18%). Welding process was performed with solid and basic flux cored wires. This paper presents results attained by analyse of collected data for MAG welding voltage and welding current, as well as welding process sound signals. Final results are shown in appropriate diagrams: moving average values distribution of welding parameters, as well as welding voltage, welding current and sound signals amplitude as a function of the time.

on-line monitoring; main welding parameters; MAG welding; basic flux cored wire

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

183-186-x.

2004.

objavljeno

Podaci o matičnoj publikaciji

Proceedings of 8th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2004

Ekinović, S. ; Brdarević, S. ; Vivancos, J. ; Puerta, F.

Zenica: Faculty of Mechanical Engineering in Zenica, Escola Tecnica Superior D`Enginyeria Industrial de Barcelona, Department d`Enginyeria Mechanica, Universitat Politecnica de Catalunya

Podaci o skupu

8th International Research/Expert Conference, "Trends in the Development of Machinery and Associated Technology" TMT 2004

predavanje

15.09.2004-17.09.2004

Neum, Bosna i Hercegovina

Povezanost rada

Strojarstvo