Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Microstructure of nanosized TiO2 obtained by sol-gel synthesis (CROSBI ID 77632)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Gotić, Marijan ; Ivanda, Mile ; Sekulić, Andreja ; Musić, Svetozar ; Popović, Stanko ; Turković, Aleksandra ; Furić, Krešimir Microstructure of nanosized TiO2 obtained by sol-gel synthesis // Materials letters, 28 (1996), 1-3; 225-229. doi: 10.1016/0167-577X(96)00061-4

Podaci o odgovornosti

Gotić, Marijan ; Ivanda, Mile ; Sekulić, Andreja ; Musić, Svetozar ; Popović, Stanko ; Turković, Aleksandra ; Furić, Krešimir

engleski

Microstructure of nanosized TiO2 obtained by sol-gel synthesis

Nanosized TiO2 was prepared using a sol-gel procedure. The colloidal suspension was stabilized with hydroxypropyl cellulose (HPC). This polymer prevents sintering of TiO2 particles during the heating of the starting material in the form of a solid film. The TiO2 crystallite size increased from 5 to 12 nm with increase of temperature up to 500 degrees C, as determined by X-ray diffraction. XRD phase analysis showed that the studied samples were a mixture of anatase, as the dominant phase, and brookite. A new approach to size determination of nanophase TiO2, by low-frequency Raman scattering, was used. [References: 23]

titanium oxide ; TiO2 ; synthesis ; sol-gel ; films ; microstructure

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

28 (1-3)

1996.

225-229

objavljeno

0167-577X

1873-4979

10.1016/0167-577X(96)00061-4

Povezanost rada

Fizika, Kemija

Poveznice
Indeksiranost