Multi-objective Design and Adaptable Reconfiguration of the Manufacturing System Shop-floor (CROSBI ID 516716)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Car, Zlatan ; Hatono, Itsuo ; Ueda, Kanji
engleski
Multi-objective Design and Adaptable Reconfiguration of the Manufacturing System Shop-floor
This paper presents a new approach for multi-objective design and reconfiguration of the current manufacturing system. A proposed model for multi-objective design and adaptable reconfiguration is based on the Emergent Synthesis concept. Emergent Synthesis is introduced in the adaptable reconfiguration within implementation of the layered based architecture and utilizing the concept of the Biological Manufacturing System. Based on the proposed approach a simulation model has been built and evaluated. Two types of simulation analyses have been preformed for evaluation of the simulation model. The first analysis has been conducted using randomly generated input data. For the purpose of this analysis it was simulated production in the shop-floor of the manufacturing system with the two different initial configurations. For the second analysis, case studies were performed using realistic data ; it was simulated production of the cellular phone devices, and production of the manufacturing mechanical parts (classical machine tool production). From obtained results of the simulation it can be conclude that a proposed model has a high level of multi-objective adaptation of the manufacturing system shop-floor.
Emergent Synthesis; Layered BMS; multi-objective design and reconfiguration
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
493-500-x.
2003.
objavljeno
Podaci o matičnoj publikaciji
Progres in Virtual Manufacturing Systems, Proceedings of The 36th CIRP International Seminar on Manufacturing Systems
Prof. Dr.-Ing. Helmut Bley
Saarbrücken: Published by CIRP ISMS
Podaci o skupu
36th CIRP International Seminar on Manufacturing Systems
predavanje
03.06.2003-05.06.2003
Saarbrücken, Njemačka