Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Beam Stability and Dynamic Alignment at SLS (CROSBI ID 516806)

Prilog sa skupa u zborniku | stručni rad

Streun, Andreas ; Boege, Michael ; Dehler, Micha ; Kramert, Reinhold ; Rivkin, Leonid ; Zelenika, Saša ; et al. Beam Stability and Dynamic Alignment at SLS. 2001

Podaci o odgovornosti

Streun, Andreas ; Boege, Michael ; Dehler, Micha ; Kramert, Reinhold ; Rivkin, Leonid ; Zelenika, Saša ; et al.

engleski

Beam Stability and Dynamic Alignment at SLS

Long and short term stability of the electron beam in the storage ring of the Swiss Light Source (SLS) is achieved by dynamic alignment systems and by fast closed orbit feedback. Quadrupoles, sextupoles and BPMs are rigidly mounted on girders, while the bending magnets are bridging adjacent girders. Positioning of the girders is performed by mover system based on excenters and encoders. The girder positions are monitored by a hydrostatic levelling system and a digital encoder based horizontal positioning system. Another encoder based system for controlling the BPM positions relative to adjacent quadrupoles is calibrated by beam based alignment. Residual noise of the electron beam has been estimated by investigation of seismic spectra, girder eigenfrequencies, beam amplification factors and capabilities of the fast orbit feedback system. We will describe the systems, summarize the status by September 2001 and show first results.

synchrotron facility design; electron beam stability; dynamic alignment

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

2001.

objavljeno

Podaci o matičnoj publikaciji

Podaci o skupu

Shanghai Symposium on Intermediate-Energy Light Sources

pozvano predavanje

24.09.2001-26.09.2001

Šangaj, Kina

Povezanost rada

Fizika, Strojarstvo