Modeling of gas oil catalytic cracking based on the MAT test (CROSBI ID 123740)
Prilog u časopisu | izvorni znanstveni rad
Podaci o odgovornosti
Sertić-Bionda, Katica ; Gomzi, Zoran ; Fabulić-Ruszkowski, Maja
engleski
Modeling of gas oil catalytic cracking based on the MAT test
In the present work, catalytic cracking of gas oils has been studied in a standard MAT reactor. Distribution of the cracking product was measured at four different temperatures, and two types of feedstocks were used. Based on these experimental results, a 4-lump kinetic model was applied. Kinetic constants were estimated using sequential step optimization method. Simulation results are in a good agreement with experimental data. An isothermal pseudo steady-state model for the fixed bed MAT reactor was proposed. The influence of feedstock and reactor temperature on overall conversion and distribution of product fractions were discussed.
catalytic cracking; microactivity test; kinetic modeling
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o izdanju
57 (3)
2006.
113-119-x
objavljeno
0027-755X