Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Design of Thermomechanical Processing and Transformation Behaviour of Bulk Si-Mn Trip Steel (CROSBI ID 126246)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Zrnik, Jozef ; Mamuzić, Ilija ; Lukaš, P. ; Muransky, O. ; Jenčuš, P. ; Novy, Z. Design of Thermomechanical Processing and Transformation Behaviour of Bulk Si-Mn Trip Steel // Metalurgija, 45 (2006), 2; 85-91

Podaci o odgovornosti

Zrnik, Jozef ; Mamuzić, Ilija ; Lukaš, P. ; Muransky, O. ; Jenčuš, P. ; Novy, Z.

engleski

Design of Thermomechanical Processing and Transformation Behaviour of Bulk Si-Mn Trip Steel

In the last decade, a lot of effort has been paid to optimising the thermomechanical processing of TRIP steels that stands for transformation induced plasticity. The precise characterization of the resulting multiphase microstructure of low alloyed TRIP steels is of great importance for the interpretation and optimisation of their mechanical properties. The results obtained in situ neutron diffraction laboratory experiment concerning the austenite to ferrite transformation in Si-Mn bulk TRIP steel specimens, displaying the transformation induced plasticity (TRIP), are presented. The advancement of ferrite formation during transformation in conditioned austenite is investigated at different transformation temperatures and has been monitored using neutron diffraction method. The relevant information on transformation proceeding is extracted from neutron diffraction spectra. The integrated intensities of austenite and ferrite neutron diffraction profiles developed during the transformation are then assumed as a measure of the phase volume fractions of both phases in dependence on transformation temperature and austenite conditioning. According to the yielding information on ferrite volume fractions from isothermal transformation kinetics data the thermo mechanical processing of bulk specimen was designed in order to support austenite stabilization through bainitic transformation. The volume fractions of retained austenite resulting at alternating transformation conditions were measured by neutron and X-ray diffraction respectively. The stability of retained austenite in bulk specimens during room temperature mechanical testing was characterized by in situ neutron diffraction experiments as well.

transformation induced plasticity (TRIP) ; Si-Mn steel ; thermomechanical processing

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

45 (2)

2006.

85-91

objavljeno

0543-5846

1334-2576

Povezanost rada

Metalurgija

Poveznice
Indeksiranost