Determination of the friction parameters using MATLAB interpolation surfaces (CROSBI ID 521720)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Vlak, Frane ; Cvitanić, Vedrana ; Duplančić, Igor
engleski
Determination of the friction parameters using MATLAB interpolation surfaces
The friction is inevitable background of the metal forming processes and primarily it increases energy consumption. It can be reduced by lubrication and thus, quality of the products can be improved, too. Therefore, in designing a metal forming operation, it is necessary to quantify friction. Many friction laws are used for that purpose. Parameters, usually called coefficients or factors, used in that laws can be determined using various tests. Amongst them, ring compression test. has proven to be one of the best. In this work, it is shown how the MATLAB predefined interpolation functions can be used to determine required friction parameters.
friction ; ring compression test ; FEM ; calibration surface
Zbornik radova dostupan na CD-ROM-u
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
130
2006.
objavljeno
Podaci o matičnoj publikaciji
Matejicek, Franjo
Osijek: Grafika Osijek
953-96243-8-X
Podaci o skupu
5th INTERNATIONAL CONGRESS OF CROATIAN SOCIETY OF MECHANICS
predavanje
21.09.2006-23.09.2006
Trogir, Hrvatska