The effect of Fe on corrosion behaviour of the EN AW 8006 alloy (CROSBI ID 522528)
Prilog sa skupa u zborniku | izvorni znanstveni rad | domaća recenzija
Podaci o odgovornosti
Radošević, Jagoda ; Gudić, Senka ; Kliškić, Maja ; Slavica, Sanja
engleski
The effect of Fe on corrosion behaviour of the EN AW 8006 alloy
Electrochemical measurement techniques (potentiodynamic polarisation, cyclic voltammetry, electrochemical impedance spectroscopy) were used to examine the effect of Fe (in the range from 1.25 to 1.91 wt. %) on the corrosion behaviour of the Al-Fe alloy in a 0.5 M NaCl solution. The optimum Fe content in the alloy was 1.50 %. Namely, the alloy with 1.50 % Fe exhibited the highest corrosion resistance and the lowest corrosion current density. The active dissolving of this alloy was shifted towards more positive potentials, and the corrosion resistance in the active potential region was higher as well. Moreover, subsequent thermal and mechanical treatment of the alloy was shown to increase its stability, as well as the corrosion resistance in the passive and active potential region.
Al-Fe alloy ; corrosion ; passivation ; thermal and mechanical treatment
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
103-105-1.
2006.
objavljeno
Podaci o matičnoj publikaciji
Gojo, Miroslav ; Mandić, Zoran
Zagreb: Hrvatsko društvo kemijskih inženjera i tehnologa (HDKI)
Podaci o skupu
4^th Croatian Symposium on Electrochemistry
predavanje
28.05.2006-01.06.2006
Primošten, Hrvatska