Assesment of Method Selection for Calculation of Multiple Diffraction Losses by Application of "Knife Edge" Model (CROSBI ID 469959)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Zanchi, Igor ; Marinović, Ivan ; Blažević, Zoran
engleski
Assesment of Method Selection for Calculation of Multiple Diffraction Losses by Application of "Knife Edge" Model
Multiple diffraction losses according to Knife Edge model are defined by multiple Fresnel integral which, except in the case of two obstacles, may be solved by numerical method acc. to Vogler, or by widely accepted approximate methods. Taking into consideration diffraction losses calculated by numerical integration (Vogler), as reference ones, it is evident that approximate Daygouts model gives the best results. However, with certain configuration of diffraction obstacles on radio path, result according to Deygout may be considerably improved by introduction of Giovaneli˘s correction. The intention of this work is to give an improvement assessment of results obtained by application of Giovaneli˘s correction as the function of geometric disposition of diffraction obstacles.
MULTIPLE DIFFRACTION LOSSES;
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
417.-421.-x.
1998.
objavljeno
Podaci o matičnoj publikaciji
Podaci o skupu
EUROSIM 1998 Simulation Congress
poster
14.04.1998-15.04.1998
Helsinki, Finska