Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Urea determination in FIA mode by a newly designed urease-based biosensor (CROSBI ID 130273)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Milardović, Stjepan ; Kruhak, Ivan ; Grabarić, S. Božidar Urea determination in FIA mode by a newly designed urease-based biosensor // Laboratory robotics and automation, 11 (1999), 5; 266-271-x

Podaci o odgovornosti

Milardović, Stjepan ; Kruhak, Ivan ; Grabarić, S. Božidar

engleski

Urea determination in FIA mode by a newly designed urease-based biosensor

This article describes a new design of a urea biosensor developed by covalent immobilization of the enzyme urease on the top of a nickel-hexacyanoferrate-modified nickel electrode. The behavior of the electrode was described with respect to several experimental parameters in flow injection mode. Detection of urease-produced NH4+ ion from parent urea at a working potential of 100 mV vs. a Ag/AgCl/2 M NaCl electrode showed linearity in the concentration range of urea in aqueous solutions from 10 mu M to 10 mM. The influence of carrier electrolyte concentration, flow rate, and pH an the properties of the transducer were also examined. The selectivity recognition of the transducer was studied with respect to the influence of potentially interfering sodium and potassium ions ; The electrode was tested over a period of 45 days. After this period, the biosensor lost only 20% of its sensitivity, (C) 1999 John Wiley & Sons, Inc

nickel electrode surfaces; films

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

11 (5)

1999.

266-271-x

objavljeno

0895-7533

Povezanost rada

Kemija