Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Stresses in Axial Loaded Cylinder with Unequal Diametrically Opposite Holes (CROSBI ID 527432)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Kulenović, Zlatan Stresses in Axial Loaded Cylinder with Unequal Diametrically Opposite Holes // Proceedings of EUROMECH 2nd European Solid Mechanics Conference. Genova: EUROMECH, 1994. str. 002-004-x

Podaci o odgovornosti

Kulenović, Zlatan

engleski

Stresses in Axial Loaded Cylinder with Unequal Diametrically Opposite Holes

The problem of the distribution of stresses in axial loaded cylinders with unequal holes has important technical application. In this work is analyzed a thin circular cylinder weakened by two diametrically opposite holes in form of triangle and five sided polygon with rounded corners, under axial compression. The stress concentration factors around the holes are defined by proposed analytical solution based on the application of complex variable functions and conformal mapping combined with the iteration method. Corresponding computer program for analysis was developed. The experimental results are obtained by photoelastic frozen stress method. On the basis of analytical and experimental solution the curves of stress concentration factor around the holes are comparatively drawn. The accuracy of proposed analytical solution was established to be very satisfying for engineering practice.

stresses; axial loaded cylinder; unequal diametrically opposite holes

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

002-004-x.

1994.

objavljeno

Podaci o matičnoj publikaciji

Proceedings of EUROMECH 2nd European Solid Mechanics Conference

Genova: EUROMECH

Podaci o skupu

EUROMECH 2nd European Solid Mechanics Conference

predavanje

12.09.1994-16.09.1994

Genova, Italija

Povezanost rada

Strojarstvo