Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Cost Evaluation of Shell and Compact Models in 3D Printing (CROSBI ID 138424)

Prilog u časopisu | izvorni znanstveni rad

Galeta, Tomislav ; Kljajin, Milan ; Karakašić, Mirko Cost Evaluation of Shell and Compact Models in 3D Printing // Výrobné inžinierstvo, 7 (2008), 3; 27-29

Podaci o odgovornosti

Galeta, Tomislav ; Kljajin, Milan ; Karakašić, Mirko

engleski

Cost Evaluation of Shell and Compact Models in 3D Printing

Compact models printed on 3D printer capture a significant amount of passive building powder. This can be avoided if models are designed as shells in cases where it is acceptable. In this paper performed a cost evaluation of compact versus shell models regarding 3D printing process. It showed that shell models lower the printing costs only if models are infiltrated by wax. For all other infiltrants, there is no significant difference between shell and compact models. Furthermore, shell models are somewhat costlier than the compact models, especially as the base size is increasing.

3D printing; cost calculation; rapid prototyping

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

7 (3)

2008.

27-29

objavljeno

1335-7972

Povezanost rada

Strojarstvo

Poveznice