Reduction of mouldboard plough share wear by a combination technique of hardfacing (CROSBI ID 139281)
Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Horvat, Zvonimir ; Filipović, Dubravko ; Košutić, Silvio ; Emert, Rudolf
engleski
Reduction of mouldboard plough share wear by a combination technique of hardfacing
This paper presents comparison of wear of regular mouldboard plough shares and two plough shares made of different basic materials, steel EN 10027 (HF-1) and EN 50Mn7 (HF-2), hardfaced by a combination of two welding processes, namely shielded metal arc welding (SMAW) and high-frequency induction welding (HFIW). Wear was determined by measurements of the changes of dimensions and weight during ploughing of sandy clay soil in Croatia. The dimensions and weight losses were lower for both types of hardfaced plough shares in comparison to regular shares, and lower fuel consumption and a higher rate of work were achieved with hardfaced plough shares. Hardfaced plough shares also offer lower production costs in comparison to regular plough shares. According to the overall results, this protection method can be recommended as an efficient solution for plough share wear protection.
Tillage tool; Wear; Hardfacing; Fuel consumption; Rate of work; Costs
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o izdanju
Povezanost rada
Poljoprivreda (agronomija)