Experimental analysis of properties of materials for rapid prototyping (CROSBI ID 139467)
Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Pilipović, Ana ; Raos, Pero ; Šercer, Mladen
engleski
Experimental analysis of properties of materials for rapid prototyping
Rapid prototyping (RP) can substantially shorten the time and reduce the cost of developing a new product from the initial idea to production. Rapid prototyping can help in recognizing the basic defects whose subsequent correction may prove very expensive, especially if they have already been made when the product is ready for production. There are also many restrictions of RP procedures, primarily in the number of available materials and their properties, which may differ significantly from the properties of end product materials. In this work, based on the stipulated standards of the 3D printing machines (ZPrinter 310 Plus) and the hybrid Polyjet technique (Objet Eden 330), adequate test specimens were made. Furthermore, with adequate equipment, we carried out the analysis of the dimensions, roughness of surfaces, and mechanical properties of prototype test specimens. Then, based on the data obtained by testing of properties, we provided a critical commentary regarding the data stipulated by their producers.
3D printing; Hybrid Polyjet technique; Roughness of surface; Mechanical properties of materials
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o izdanju
40 (1-2)
2009.
105-115
objavljeno
0268-3768
10.1007/s00170-007-1310-7