Grain refining of Al-Si-X casting alloys and control of nucleation potential in foundries (CROSBI ID 539944)
Prilog sa skupa u zborniku | izvorni znanstveni rad
Podaci o odgovornosti
Mrvar, Primož ; Petrič, Mitja ; Medved, Jožef ; Unkić, Faruk
engleski
Grain refining of Al-Si-X casting alloys and control of nucleation potential in foundries
This paper describes the influence of grain refiners, modifiers and cooling rate on microstructure of Al-Si alloys. Solidification of 239 (AlSi10Mg) and 226 (AlSi9Cu3) alloys has been investigated. Investigations have been made by » ; in situ« ; thermal analysis, simultaneous thermal analysis (STA) chemical analysis and metallographic analysis. Investigated alloys have been grain refined and modified. By cooling curves at different cooling rates the undercooling and recalescence of primary and eutectic crystallization have been detected and related with largeness of primary crystals of α Al and eutectic phase β Si from eutectic (α Al + β Si). The relation between largeness of microstructural constituents and cooling rate was determined with physical models as well.
grain refinement; modification; cooling rate; microstructure and physical model
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
20-2008-x.
2008.
objavljeno
Podaci o matičnoj publikaciji
Unkić, Faruk
Sisak: Metalurški fakultet Sveučilišta u Zagrebu
978-953-7082-06-2
Podaci o skupu
Development of Foundry Management and Technology
predavanje
05.06.2008-07.06.2008
Opatija, Hrvatska