MAG welding process - analysis of welding parameter influence on joint geometry (CROSBI ID 541342)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Klarić, Štefanija ; Samardžić, Ivan ; Kladarić, Ivica
engleski
MAG welding process - analysis of welding parameter influence on joint geometry
Quality of welded joint at MAG welding process depends of numbers of influences, like type and thickness of base metal, groove type, welding position etc., but the proper selection of welding parameters is also very important. Due to that, the analysis of weld bead geometry at MAG welding process with regard to weld current, voltage and weld speed (heat input) and the type and shielding gas flow is analyzed in this paper. The assumption that the proper selection of gas flow and heat input will reflect trough weld joint with satisfactory geometrical characteristics will be researched in this paper.
MAG process; welding parameters; weld bead width
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
185-188.
2008.
objavljeno
Podaci o matičnoj publikaciji
Ekinović, Sabahudin ; Yalcin, Senay ; Calvet, Joan Vivancos
Zenica: Faculty of Mechanical Engineering Zenica, Bahcesehir University Instambul, Escola Tecnica Superior DˇEnginyeria Industrial de Barcelona
978-9958-617-34-8
Podaci o skupu
12th International Research/Expert Conference ” Trends in the Development of Machinery and Associated Technology”
poster
26.08.2008-30.08.2008
Istanbul, Turska