Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Analysis of the silver halide printing plates after printing process (CROSBI ID 37481)

Prilog u knjizi | izvorni znanstveni rad

Cigula, Tomislav ; Mahović Poljaček, Sanja ; Gojo, Miroslav Analysis of the silver halide printing plates after printing process // DAAAM International Scientific Book 2008 / Katalinic, Branko (ur.). Beč: DAAAM International Vienna, 2008. str. 229-238

Podaci o odgovornosti

Cigula, Tomislav ; Mahović Poljaček, Sanja ; Gojo, Miroslav

engleski

Analysis of the silver halide printing plates after printing process

One of the most important features in lithography is the stability of the printing plates during the printing process. It is highly influenced by the consistency and the wear of the photoactive and the aluminium oxide layers. In this paper the optical properties of the silver halide photoactive layer were observed by measuring coverage value on the printing plates before and after the printing process. The results have shown that the wear of silver halide layer is not significant but is visible after 80000 prints made. This fact leads to conclusion that this kind of printing plate enables high quality prints through the long printing run.

lithography, printing plates, quality, stability.

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

229-238.

objavljeno

Podaci o knjizi

DAAAM International Scientific Book 2008

Katalinic, Branko

Beč: DAAAM International Vienna

2008.

978-3-901509-69-0

Povezanost rada

Grafička tehnologija