Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Plastometricke vysledky napetovo-deformačnih chovani a stupne zmekčeni feromanganove twip oceli (CROSBI ID 548132)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Kliber, Jiri ; Drozd, Kamil ; Mamuzić, Ilija Plastometricke vysledky napetovo-deformačnih chovani a stupne zmekčeni feromanganove twip oceli // METAL 2009 / Kliber, Jiri (ur.). Hradec nad Moravici: Tanger, 2009. str. 19-21

Podaci o odgovornosti

Kliber, Jiri ; Drozd, Kamil ; Mamuzić, Ilija

češki

Plastometricke vysledky napetovo-deformačnih chovani a stupne zmekčeni feromanganove twip oceli

The ferromanganese TWIP steels with content of 17 to 20% of manganese are fully austentic and non-magnetic, without any phase transformation. Owing to the claiming of the twinning mechanism the TWIP-steels are able to satisfy a great number od technical requirements for production of cars of the new generation. The primary experimental results of the TWIP steels show that high and tensille strenght of 600 to 1100 MPa and extreme values of ductility at intervals from 60% to 90%. Through the method of plasma and vacuum melting there were prepared alloyed castings Fe-Mn-C. The samples with dimension od 8, 5 x 15 x 20 mm were put to plasto-metrically checking (PSCT) on the Gleeble 3500. As variables there were selected temperatures from 900C to 1100C. The tests were both continuous with the deformation e=0, 8 as discontinuous with the consecutive deformation e1 up to e3=0, 3 and with the terms between the draughts from 1 to 100 seconds.

ferromanganese TWIP steels; thermal-mechanical simulator; tension deformation; softening

nije evidentirano

engleski

Stress-strain behaviour and softening in manganese twip steel tested in thermal-mechanical simulator

nije evidentirano

ferromanganese TWIP steels; thermal-mechanical simulator; tension deformation; softening

nije evidentirano

Podaci o prilogu

19-21.

2009.

objavljeno

Podaci o matičnoj publikaciji

METAL 2009

Kliber, Jiri

Hradec nad Moravici: Tanger

Podaci o skupu

18. mezinárodní konferenci metalurgie a materiálů

predavanje

19.05.2009-21.05.2009

Hradec nad Moravicí, Češka Republika

Povezanost rada

Metalurgija