Modelling And Simulation of The Selection Of Optimal Lubricators By Cold Drawing (CROSBI ID 473327)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Jurković, Milan ; Tufekčić, Džemo ; Jurković, Dragan
engleski
Modelling And Simulation of The Selection Of Optimal Lubricators By Cold Drawing
The mathematical experimental method modelling described shows that the friction coefficient and contact temperature can excatly be determined on the contact surface of tool and workpiece, which is significant for the proper tool construction , selection of optimal lubricant , less tool and energy consumption. The obtained results and mathematical models indicate that the ceefficients of friction and temperature is depend on the drawing speed, degree of strain and technological lubricant used.It was determined that the best lubricants were coatngs with sodium soap:Sodium soapy powder plus calcium stearate,where is coefficient of contact friction is 0,045-0,058.
Mathematical Modelling;Cold Drawing;Optimal Lubricant;Friction Coefficient;Contact Temperature
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
133-136-x.
1999.
objavljeno
Podaci o matičnoj publikaciji
Podaci o skupu
ICIT` 99
predavanje
18.04.1999-24.04.1999
Maribor, Slovenija