Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Modern Deformation Measurement Techniques and their Comparison (CROSBI ID 151206)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Kovačič, Boštjan ; Kamnik, Rok ; Premrov, Miroslav ; Gubeljak, Nenad ; Predan, Jožef ; Tišma, Zdravko Modern Deformation Measurement Techniques and their Comparison // Strojniški vestnik, 54 (2008), 5; 364-371

Podaci o odgovornosti

Kovačič, Boštjan ; Kamnik, Rok ; Premrov, Miroslav ; Gubeljak, Nenad ; Predan, Jožef ; Tišma, Zdravko

engleski

Modern Deformation Measurement Techniques and their Comparison

Deformation measurement experiment has been undertaken where a concrete structure was subject to controlled loading. Concrete plate was loaded with hydraulic cylinder PZ 100 up to 42 kN. Nikon total station ser. 720 and camera Fuji Pro S3 have been used to make measurements at critical points during each additional load. A hydraulic computer operated cylinder was used for load increase. The use of total stations for deformation measurements is quite often, but the combination with digital photography is rather new and very suitable technique. It offers the capability of simultaneous monitoring of a large number of signalized or non-signalized points with very low root mean square error of 0.16 mm in geodetic method 0.7 mm in photogrammetry, respectively. The concrete plate was modeled and the comparison with the geodetic, photogrammetric and hydraulic method was made.

deformation measurements; geodesy; digital photogrammetry

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

54 (5)

2008.

364-371

objavljeno

0039-2480

Povezanost rada

Geodezija

Indeksiranost