Deep Drawing Stress Modelling With Wall Thickness Reduction (CROSBI ID 473365)
Prilog sa skupa u zborniku | sažetak izlaganja sa skupa
Podaci o odgovornosti
Jurković, Milan ; Hriešik, Andrej ; Barišić, Branimir
engleski
Deep Drawing Stress Modelling With Wall Thickness Reduction
Drawing stress modelling, respectively deformation force of deep drawingprocess with wall thickness reduction has been performed by using the upper bound method. Basic parameters of modelling are: technological (deformation degree), design (tool working zone geometry), kinematic (plastic flow angle) and tribological (contact friction). The purpose of stress modelling and drawing force is minimization of tool loading with the aim of increasing tool life and productivity of the machining system. By applying macro optimization of deep drawing process tool life may be increased more than 50%, which is the main aim of this paper.
Deep Drawing Process; Modelling; Thicknes Reduction; Drawing Force; Upper Bound Method
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
IV109-IV119-x.
1999.
objavljeno
Podaci o matičnoj publikaciji
Cebalo, Roko ; Schulz, Herbert
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS)
Podaci o skupu
5th International Scientific Conference on production Engineering
poster
17.06.1999-18.06.1999
Opatija, Hrvatska