Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

A contribution to the investigation of sawing quality in relation to saw teeth wearing (CROSBI ID 473437)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Goglia, Vlado ; Beljo-Lučić, Ružica A contribution to the investigation of sawing quality in relation to saw teeth wearing // Trieskove a beztrieskove obrabanie dreva 2000 / Dzurenda, Ladislav (ur.). Zvolen: Tehničko Sveučilište u Zvolenu (TUZ), 2000. str. 57-63-x

Podaci o odgovornosti

Goglia, Vlado ; Beljo-Lučić, Ružica

engleski

A contribution to the investigation of sawing quality in relation to saw teeth wearing

Surface roughness and board thickness variations are the most important parameters of the sawing quality and teeth wearing influences them both. In order to find out the relation between the teeth cutting edge wearing and the above parameters, measurements on a log band saw in normal working conditions were carried out. Both parameters were measured using a Hottinger DMC Plus Data Acquisition System. The measuring procedure and the transducers are described in the paper as well as the analyzed measurement results. According to the measurement results it can be said that both, the board thickness variation and the surface roughness, are increasing with the increase of the cutting edge wearing. The relation between the surface roughness and cutting time i.e. cutting length, has been mathematically expressed while the relation between the board thickness variation and cutting time, i.e. cutting length, has been graphically represented.

surface roughness; thickness variation; tool wearing

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

57-63-x.

2000.

objavljeno

Podaci o matičnoj publikaciji

Trieskove a beztrieskove obrabanie dreva 2000

Dzurenda, Ladislav

Zvolen: Tehničko Sveučilište u Zvolenu (TUZ)

Podaci o skupu

Trieskove a beztrieskove obrabanie dreva 2000

predavanje

19.10.2000-21.10.2000

Vysoké Tatry, Slovačka

Povezanost rada

nije evidentirano