Checking the accuracy of working systems (CROSBI ID 474003)
Prilog sa skupa u zborniku | sažetak izlaganja sa skupa | međunarodna recenzija
Podaci o odgovornosti
Ivančić, Ivan ; Mihoci, Kristijan
engleski
Checking the accuracy of working systems
Deviations from a given relative motion between tool and workpiece are consequence of: failures generated in manufacturing phase or during assembly; elastic deformations caused by static, dynamic and/or thermal stresses; failures in control circuits. Check can be done by means of test devices that can be quickly and easily set on a machine, and processing of the given information can be performed on personal computers. One such test was made by means of Quick Check Ballbar System equipment of the Renishaw company on the three-axis machining centre. Testing is very short, and information about current condition of the machine is sufficient for analysis. Monitoring of working system condition, i.e. monitoring of changes in deviations could be done by laser interferometer. Besides, by applying elements of adaptive control, laser interferometer could be used for automatic (program) correction of geometrical deviations.
testing; monitoring; maintenance
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
197-198-x.
2000.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the 11th International DAAAM Symposium
Katalinić, Branko
Beč: DAAAM International Vienna
Podaci o skupu
Proceedings of the 11th International DAAAM Symposium
predavanje
19.10.2000-21.10.2000
Opatija, Hrvatska