Determination of Vickers Hardness Applying Different Loads (CROSBI ID 554472)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Ćorić, Danko ; Aleksandrov Fabijanić, Tamara ; Ivaniš, Davor
engleski
Determination of Vickers Hardness Applying Different Loads
In paper procedure of Vickers hardness measurements applying different loads is described. Measurements were made on referent hardness block with nominal value of hardness 199 HV 10 in the field of macrohardness, semi-microhardness and microhardness with the purpose of different load analysis on measured hardness values. Applied loads (forces) vary in the range from 0, 196 N (measuring method HV 0, 02) to 294, 20 N (measuring method HV 30) while measurements were carried out on two different hardness testers from which one is referent hardness tester. On the basis of carried measurements comparison of measured Vickers hardness on different measuring spots and comparison of measured hardness values and nominal hardness of referent hardness block is carried out. Certain conclusions are brought.
Vickers hardness; load; macrohardness; semi-microhardness; microhardness
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
302-310.
2009.
objavljeno
Podaci o matičnoj publikaciji
MATRIB 2009
Grilec Krešimir, Marić Gojko
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT)
978-953-7040-15-4
Podaci o skupu
International Conference MATRIB 2009
predavanje
24.06.2009-26.06.2009
Vela Luka, Hrvatska