Analyzing the structure of real metal foam (CROSBI ID 555426)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Borovinšek, Matej ; Vesenjak, Matej ; Matela, Jožef ; Ren, Zoran ; Krstulović-Opara, Lovre
engleski
Analyzing the structure of real metal foam
The paper presents a method for modeling the geometrical features of real metal open-cell foams by means of computer tomography and 3D image analysis. A sample of open-cell metal foam was scanned using a computer tomography and the resulting data was used to create a 3D foam model from voxels. Image processing technique called "volume thinning" was used to extract the foam skeleton model, which was used for construction of finite element model using lattice modeling technique. The validation of the model was carried out using a compression simulation in comparison with experimental testing. The results show a very good agreement between the stress-strain curves obtained using simulations and experiments and so justify the use of lattice modeling for further research of open-cell foam behavior.
Metal foam; open cell cellular structure
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
2009.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of 6th International Congress of Croatian Society of Mechanics
Smojver I., Sorić J.
Zagreb: Hrvatsko društvo za mehaniku (HDM)
978-953-7539-11-5
Podaci o skupu
6th International Congress of Croatian Society of Mechanics
predavanje
30.09.2009-02.10.2009
Dubrovnik, Hrvatska