Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

The sheet metal forming with hydraulic fluid pressure (CROSBI ID 555659)

Prilog sa skupa u zborniku | ostalo | međunarodna recenzija

Grizelj, Branko ; Josip, Cumin ; Seuček, Ivan ; Šoškić, Nikola The sheet metal forming with hydraulic fluid pressure // Icit&MPT 2009 / Gašper Gaotar (ur.). Celje: TECOS Slovenian Tool and Die Development Centre, 2009. str. 93-96

Podaci o odgovornosti

Grizelj, Branko ; Josip, Cumin ; Seuček, Ivan ; Šoškić, Nikola

engleski

The sheet metal forming with hydraulic fluid pressure

The plastic forming of the sheet metal plates with fluid pressure is the most applied process for the modern production of special elements, and elements of widespread use. Higher relations of a drawing ratio are reached by the application of hydroforming technology. Number of necessary operations, number of tools, and production costs for the mass production of hydroformed parts are lower than compared to conventional metalforming processes. Also the quality of products is considerably better, which means that satisfactory tribological conditions for plastic forming are achieved. Therefore there is a considerable increase of application of this technology at the technologically developed countries.

hydroforming; fluid pressure; shhet metal; pipe; die

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

93-96.

2009.

objavljeno

Podaci o matičnoj publikaciji

Icit&MPT 2009

Gašper Gaotar

Celje: TECOS Slovenian Tool and Die Development Centre

978-961-6692-01-4

Podaci o skupu

7th international conference on industrial tools and material process technologies

poster

04.10.2009-07.10.2009

Celje, Slovenija

Povezanost rada

Strojarstvo