Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Crosslinking of an unsaturated polyester resin in the mould: Modelling and heat transfer studies (CROSBI ID 160407)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Kosar, Vanja ; Gomzi, Zoran Crosslinking of an unsaturated polyester resin in the mould: Modelling and heat transfer studies // Applied Mathematical Modelling, 34 (2010), 6; 1586-1596. doi: 10.1016/j.apm.2009.09.004

Podaci o odgovornosti

Kosar, Vanja ; Gomzi, Zoran

engleski

Crosslinking of an unsaturated polyester resin in the mould: Modelling and heat transfer studies

The crosslinking of unsaturated polyester was studied by using an experiment and a mathematical model of the process. Temperature-time profiles were recorded in the centre of the sample inside the mould at the outer wall of the cylindrical copper mould, and in the bulk of the heated air bath. A numerical model was constructed by taking into account the heat transferred by convection from the air to the mould surface and the heat transferred by conduction through the resin, as well as the heat generated by the crosslinking reaction. The convection heat transfer coefficient was determined in independent experiments with the empty copper mould. Introduction of the carbon base filler reduced the amount of heat generated in the composite due to the less reactive component in the composite. As a result, it lowered the temperature of the resin. By recording the temperature-time and the degree of crosslinking-time profiles developed within the sample extensive knowledge of the process can be obtained. The effects of the convection heat transfer on the rate of mould heating, and the conduction heat transfer through the mould as well as the internal heat generated by the crosslinking reaction are visibly shown, despite a complexity of the process.

crosslinking ; polyester resin ; mould ; airflow ; mathematical model

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

34 (6)

2010.

1586-1596

objavljeno

0307-904X

1872-8480

10.1016/j.apm.2009.09.004

Povezanost rada

Kemijsko inženjerstvo

Poveznice
Indeksiranost