Influence of the activating flux on weld joint properties at arc stud welding process (CROSBI ID 565001)
Prilog sa skupa u časopisu | sažetak izlaganja sa skupa | međunarodna recenzija
Podaci o odgovornosti
Samardžić, Ivan ; Bajić, Darko ; Stoić, Antun ; Klarić, Štefanija
engleski
Influence of the activating flux on weld joint properties at arc stud welding process
In this paper, the influence of the activating flux on the weld joint properties at the drawn arc stud welding process with ceramic ferrule is analysed. In the experimental part of the paper, the arc stud welding process was performed, with the application of the activating flux for ATIG process. In order to evaluate the influence of the activating flux on the welding process parameters variations, the main welding parameters were monitored by an on-line monitoring system. Besides monitoring of welding current and voltage, the influence of the activating flux on the weld joint appearance was investigated. The macrosections of the weld joints welded with the same parameters, but with and without the presence of activating flux are shown.
arc stud welding; activating flux; on-line monitoring; macrosection analysis
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
214-214.
2010.
nije evidentirano
objavljeno
Podaci o matičnoj publikaciji
Metalurgija
Alfirević, I ; Samardžić, I ; Dibatkin, S.
Zagreb: Hrvatsko metalurško društvo
0543-5846
Podaci o skupu
Simpozij Hrvatskog Metalurškog Društva SHMD '2010
poster
20.06.2010-24.06.2010
Šibenik, Hrvatska